Regency CS1200 installation manual Minimum Alcove Clearance to Combustible Materials

INSTALLATION

MINIMUM ALCOVE CLEARANCE TO COMBUSTIBLE MATERIALS

MEASUREMENTS "FROM UNIT" ARE FROM THE SIDE SHIELDS OF THE STOVE TO A SIDE WALL OR TO A CORNER, AND

FROM THE REAR HEAT SHIELD TO A BACK WALL

The Regency Freestanding models have been alcove approved and must be installed with a listed double wall connector to the ceiling level.

Note: Minimum alcove ceiling height - 84"

Maximum depth of alcove - 36"

Minimum Alcove Clearance to Combustible Materials

Unit	From Back Shield			From Flue		Min.	Min. Hearth
	+ Side Shields.		Center-Line			Width	to Rear Wall
CS1200	G	H	I		J	K	L
	11"	7"	24-1/2"		14-1/2"	49-1/8"	39-1/4"

Floor Protection

A combustible floor must be protected by a non-combustible material (like tile, concrete board, or certified to UL-1618 or as defined by local codes) extend- ing beneath the heater and a minimum of 6" from each side and minimum 16" from the front face of the stove and minimum 6" (or the rear clearance to combustibles whichever is smaller) from the rear of the stove.

Minimum Overall Width (X) of Floor

Protector for all installations:

US	38-3/4"	6"
Canada	42-3/4"

6"

	Z
6"	6"
	16"
	X

Y X

6"

16"

Z

Y 6"

for angled corners

NOTE: In Canada, floor protection must extend 18" to the front and 8" to each side of the stove.

Minimum Overall Depth (Y) of Floor Protector

Unit	Residential		Residential		Mobile Home			Alcove
	"C" Vent		Close Clearance		Close Clearance
CS1200	Y	Z	Y	Z	Y	Z	Y		Z
USA	39"	6"	39	6"	39"	6"	39"		6"
Canada	43"	8"	43"	8"	43"	8"	43"		8"

8

Regency CS1200 Freestanding Wood Stove