Regency S2100M, F2100M installation manual Blower/Fan Wiring Diagram

INSTALLATION

Blower/Fan (846-515)

1)Remove the two screws from the top of the fan housing.

2)Slide the fan up into the rear heat shield.

3)After aligning holes, secure the fan to the

rear heat shield using the two screws removed earlier.

Note: The connection cord should not be in contact with any hot surfac- es.

Read the operating instructions for the fan before using. See Page 19.

Blower/Fan Wiring Diagram

WARNING: Electrical Grounding Instructions

Thisapplianceisequippedwithathreepronged(ground- ing) plug for your protection against shock hazard and should be plugged directly into a properly grounded three-prongreceptacle.Donotcutorremovetheground- ing prong from this plug.

CAUTION: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation.

18 Regency Freestanding Woodstove