Regency Wraps P36-NG4, P36-LPG4 manual Wall Switch, Remote Control, Wall Thermostat

Page 27

INSTALLATION

Option 1:

WALL SWITCH

1)Run supplied 15' of wire through the right or left side gas inlet opening. Be careful not to damage wire.

Note: We recommend a maximum of 15' of wire but if you wish to go with a longer run, use the Thermostat Wire Table.

2)Connect wire to supplied wall switch and install into the receptacle box.

CAUTION

Do not connect millivolt wall switch wires for gas appliance to a 240V power supply.

Option 2:

REMOTE CONTROL

Use the Regency® Remote Control Kit approved for this unit. Use of other systems may void your warranty.

The remote control kit comes with a hand held transmitter, a receiver and a wall mounting plate.

1)Choose a convenient location on the wall to install the receiver and the receptacle box (protection from extreme heat is very important). Run wires from the fireplace to that location. Use Thermostat Wire Table.

2)Connect the two wires to the gas valve. See diagram below.

CAUTION

Do not connect millivolt remote control wires for gas appliance to a 240V power supply.

3)Install a 9V alkaline battery in both the receiver and the transmitter. Install the receiver and its cover in the wall. Switch the hand held remote transmitter to "remote" mode. The remote control is now ready for operation.

Option 3:

WALL THERMOSTAT

A wall thermostat may be installed if desired, connect the wires as per the wiring diagram. Use chart below to determine the maximum wire length.

Note: Preferable if the thermostat is installed on an interior wall.

Regency® offers a programmable thermostat but any CSA, UCL or UL approved millivolt thermostat, 250-750 millivolt rated non- anticipator type thermostat may be used.

CAUTION

Do not connect millivolt wall thermostat wires for gas appliance to a 240V power supply.

Thermostat Wire Table

Recommended Maximum Lead Length

(Two-Wire) When Using Wall

Thermostat (CP-2 System)

Wire Size

 

Max. Length

 

 

 

 

14 GA.

 

15.24 m

16 GA.

 

9.75 m

 

18 GA.

 

6.10 m

20 GA.

 

3.66 m

22 GA.

 

2.71 m

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Regency® P36-4 Gas Log Fireplace

27

Image 27
Contents Please Keep These Instructions For Future Reference ManualTo the NEW Owner Table of Contents Data Badge Note Regency units are Data BadgeImportant Message InstallationGeneral Safety Information Installation ChecklistLocating Your GAS Fireplace Manufactured Mobile Home Additional RequirementsClearances Combustible Mantels DiagramFraming Finishing Standard Framing DimensionsFraming Dimensions with Premium Flush Front Option Mantel LEG ClearancesFlueing Introduction Unit Assembly Prior to InstallationTop Standoff Assembly Premium Flush Front Spacer InstallationClearance k in mm Exterior Flue Termination LocationsRegency Direct Vent System Flex Horizontal Terminations Only FlueingSimpson DURA-VENT Flueing Components List Simpson DURA-VENT FlueingRegency Direct Vent System Flex Flueing Arrangements Horizontal TerminationsRegency CO Axial Flue System Flex Simpson DURA-VENT CO Axial Flue GS System LPG & NG Flueing Arrangements Vertical Terminations45o elbows allowed Dura-Vent Horizontal TerminationsOffset Chart This allows for small adjustmentsVertical Terminations Remove the louvers and bay door if it is InstalledConversion Kit Contains Qty Shut off the gas supplyGAS Pipe Pressure Testing GAS Line InstallationPilot Adjustment Aeration AdjustmentLOG SET Installation Optional Brick PanelsVermiculite 2nd Grate Tab Rear Bracket5th Grate Tab Bracket Bracket NotchEmbers Flush LouvresOptional Flush Trim Place embers in these 3 locations On the burner trayLouver Tab Premium Flush Front InstallationThermodisc Plate Thermodisc Cover Grommet Wire Cover Wall Switch Remote ControlWall Thermostat Standard Wiring WiringWiring with Premium Flush Front Option To Remove the Fan Operating InstructionsOptional FAN Operating InstructionsLighting Procedure First FireNormal Operating Sounds of GAS Appliances Maintenance Instructions General Flue MaintenanceCopy of the Lighting Plate Instructions Maintenance Screws Installing ValveDiagram 2 Rear Log Stand Valve Tray Assembly Removing ValveMain Assembly Parts ListBurner Assembly & LOG SET BAY Front Assembly Description Flush Front AccessoriesPremium Flush Front Assembly Cast Faceplate Assembly Regency P36-4 Gas Log Fireplace Regency P36-4 Gas Log Fireplace General WarrantyConditions Exclusions

P36-NG4, P36-LPG4 specifications

Regency Wraps has made a significant mark in the world of grill accessories with its high-quality products, particularly the P36-LPG4 and P36-NG4 wraps. These wraps are designed specifically for grill enthusiasts who value durability, functionality, and aesthetic appeal in their cooking equipment.

The P36-LPG4 model is tailored for those who prefer liquid propane as their fuel source. It boasts a robust construction that ensures longevity and resilience against the elements. One of the key features of the P36-LPG4 is its heat-resistant fabric, which is crafted to withstand high temperatures without compromising the integrity of the wrap. This makes it an ideal choice for situations where intense heat is a norm, providing both safety and performance.

On the other hand, the P36-NG4 model caters to natural gas users. Similar to its LPG counterpart, the P36-NG4 is engineered to handle the rigors of outdoor grilling while offering a stylish appearance. The wrap is designed to fit a range of traditional grills, ensuring a snug yet flexible fit that protects the grill from dust, debris, and harsh weather conditions.

Both models feature advanced technologies, including UV resistance, which helps in maintaining the vibrant colors and quality of the fabric over time. This is crucial for outdoor gear that often faces prolonged exposure to the sun, preserving the product's aesthetic charm as well as its functional attributes.

The characteristics of the P36-LPG4 and P36-NG4 wraps extend beyond mere protection. They are equipped with user-friendly features such as easy installation; most users can simply slip the wrap over their grill in seconds. The wraps are also lightweight, which enhances portability for grillers who like to take their equipment on the go.

Furthermore, both wraps are designed with ease of maintenance in mind. They can be cleaned effortlessly, ensuring that grill enthusiasts can maintain their equipment in pristine condition without excessive effort or time.

In summary, Regency Wraps offers the P36-LPG4 and P36-NG4 models as the ultimate solution for grill protection, combining style with superior functionality. With their durable construction, advanced technologies, and user-friendly design, these wraps are a worthy investment for any grilling aficionado looking to enhance their outdoor cooking experience.