Regency P121LC, P121RC, P131 installation manual Ground Wire from Kit

Page 26

INSTALLATION

25)Locate the ground lug at the receptical box, left of the unit.

26)Connect one end of the supplied green ground wire to the lug with the nut and washer from the kit.

Ground

wire from

kit

29) Plug the DC spark generator wires to the

33) Find a location which is not too hot and is

DC Sparker.

easy to reach for changing the

 

battery.

 

34) Tie up the loose wire with the wire clip.

30)Connect the ground wire to the DC Sparker mounting bracket.

35) Check for gas leaks.

36) Check inlet and outlet pressures.

37) Check operation of fl ame control.

38) Check for proper fl ame appearance and glow on logs.

27)Install the 1/2" bushing to the heat shield.

31) InstallthesuppliedbatteryintotheDCSparker Box by opening the battery compartment.

NOTE: The battery in the DC Sparker Box will need to be replaced annually.

Installer Notice:

These instructions must be left

with the appliance.

28)Run the other end of the ground wire and DC spark generator wires through the bushing on the heat shield.

Heat Shield

Battery

Compartment

32)Mount the heat shield to the DC Sparker. Secure into place with the velcro, which is provided in the kit.

26

Regency® P121-2/P121LC-2/P121RC-2/P131-2 Zero Clearance Direct Vent Gas Fireplace

Image 26
Contents P121 / P121LC / P121RC / P131 Manufactured Mobile Home Requirements To the New OwnerTable of Contents Safety Label Copy of Safety Decal for P121/P121LC/P121RC/P131Requirements MA Code CO DetectorInstallation Checklist InstallationGeneral Safety Information Important Message Save These InstructionsSpecifications Non-load bearingP121LC-2 Left Corner Unit Locating Your GAS Fireplace Locations see section Exterior Vent Termination LocationsClearances Combustible MantelsP121-2 See Thru P131-2 Pier Framing DimensionsFraming and Finishing Corner UnitVenting Introduction Unit Assembly Prior to InstallationTop Standoff Assembly Exterior Vent Termination Locations VentHeight Meters Minimum Feet RoofPitchRigid Pipe Venting Components List SV4LB6Venting Arrangement Horizontal Terminations Rigid Pipe Venting Systems Horizontal or Vertical TerminationsRigid Pipe Venting Arrangements Horizontal Terminations Regency Direct Vent System Flex Propane & Natural GasHorizontal Venting with Two 2 90o Elbows Horizontal Venting with Three 3 90o ElbowsRigid Pipe Venting Arrangements Vertical Terminations Propane & Natural GasVertical Venting with Two 2 90o Elbows Vertical Venting with Three 3 90o ElbowsSet the unit in its desired location. Check This allows for small adjustments Vertical TerminationsFor Regency AstroCapTM Direct Vent System Flex Installation ProceduresOffset Chart Conversion KIT #731-969 from NG to LP LPG Conversion Kit Contains QtyInstallation of the DC Sparker Ground Wire from Kit GAS Pipe Pressure Testing Pilot AdjustmentGAS Line Installation High ElevationLOG Installation 327 329 326 328327 P121-2 & P131-2 Corner Models Finishing TrimLouvers & Grills Thermostat Wire Table Diagram belowWiring Diagrams Do not cut the ground terminal off under any circumstancesFor Propane Units and Units Equipped with DC Spark Boxes Terminal Block LocationLighting Procedure Shutdown ProcedureFirst Fire Aeration Adjustment Operating InstructionsNormal Operating Sounds of GAS Appliances Copy of the Lighting Plate InstructionsMaintenance Removing Valve Remove Left & Right Side Base Brick PanelsInstalling Valve FAN ReplacementDescription Parts ListP121-2 see Thru Main Assembly P131-2 Pier Main Assembly P121RC-2 Right Corner Main Assembly 204 225P121LC-2 Left Corner Main Assembly P121/P121LC/P121RC/P131-2 Burner Assembly & LOG SET Page Page Page Warranty ConditionsInstaller Please complete the following information
Related manuals
Manual 40 pages 33.79 Kb

P121LC, P121, P121RC, P131 specifications

The Regency P121RC, P121, P131, and P121LC are advanced technological innovations in the realm of heating, ventilation, and air conditioning (HVAC) systems. Designed for both residential and commercial applications, these models are known for their efficiency, reliability, and comfort-enhancing features.

The Regency P121RC is particularly notable for its high-efficiency rating, making it a popular choice for environmentally conscious consumers. With advanced heat pump technology, it provides optimal heating and cooling throughout the year, reducing energy consumption while maintaining a consistent indoor climate. The use of environmentally friendly refrigerants further emphasizes its commitment to sustainability.

The P121 model stands out for its cutting-edge smart technology integration. It is equipped with Wi-Fi connectivity, allowing users to control their HVAC systems remotely via a mobile application. This feature not only enhances convenience but also enables energy management, reducing operational costs through effective scheduling and monitoring.

The P131 model caters to larger spaces, thanks to its robust cooling and heating capabilities. It employs a variable-speed compressor that adjusts to the specific demands of the space, ensuring optimal performance while minimizing noise disruption. This model is also compatible with smart home systems, contributing to a seamless integration of technology within modern living environments.

Meanwhile, the P121LC is designed with energy conservation in mind, featuring a dual-stage heating and cooling system. Its advanced airflow technology ensures even distribution of temperature, promoting overall comfort and reducing the risk of hot or cold spots in a room. Like its counterparts, it supports remote operation through smart technology, offering users full control over their indoor climate.

In terms of construction, these models prioritize durability and longevity. They feature robust insulation and high-quality materials, which contribute to their energy efficiency and operational lifespan. The compact design also allows for flexible installation options, making them suitable for various types of spaces.

Overall, the Regency P121RC, P121, P131, and P121LC represent the pinnacle of modern HVAC technology, blending efficiency, innovative features, and user-friendly control options to provide optimal comfort in any setting. As homeowners and businesses increasingly prioritize sustainability and energy management, these models are set to play a vital role in achieving a more comfortable and eco-friendly future.