Description, Unpacking, Safety Guidelines

1/3 HP Sink Pump

System

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.

Operating Instructions & Parts Manual	SYLT30

Description

This system pumps water up to an existing water drain and is designed for residential use in laundry trays, washing machines, wet bar sinks, sinks and tubs, dehumidifiers, and air conditioners. The submersible sump pump included in this system is equipped with an 8-ft long, 3-prong grounding type power cord. Motor is oil filled and sealed for cooler running and designed to operate under water. A float switch is provided for automatic pump operation. This pump is not suitable for aquatic life.

Unpacking

Inspect this unit before it is used. Occasionally, products are damaged during shipment. If the pump or components are damaged, call our customer service department at 1-800-237-0987.

Safety Guidelines

This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.

Danger indicates an imminently

hazardous situation which, if not avoided, WILL result in death or serious injury.

Warning indicates a potentially

hazardous situation which, if not avoided, COULD result in death or serious injury.

Caution indicates a potentially

hazardous situation which, if not avoided, MAY result in minor or moderate injury.

Notice indicates important

information, that if not followed, MAY cause damage to equipment.

General Safety

Information

CALIFORNIA PROPOSITION 65

This product or

its power cord may

contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Wash hands after handling.

GENERAL SAFETY INFORMATION

1.Know the pump application, limitations, and potential hazards.

Do NOT use to

pump ﬂammable or explosive ﬂuids such as gasoline, fuel oil, kerosene, etc. Do NOT use in

ﬂammable and/or explosive atmospheres. Use pump only with liquids compatible with pump component materials. Failure to follow this warning can result in personal injury and/or property damage.

Disconnect power

before servicing. If the power disconnect is out of sight, lock in the open position and tag

it to prevent unexpected application of power. Failure to do so could result in fatal electrical shock!

2.Drain all liquids from the system before servicing.

3.Periodically inspect the pump and system components. Perform routine maintenance as required (See maintenance section).

4.When wiring an electrically driven pump such as this, follow all electrical and safety codes, as well as the most recent National Electrical Code (NEC) and the Occupational Safety and Health Act (OSHA).

5.All wiring should be performed by a qualified electrician.

6.It is strongly recommended that this unit is plugged into a Ground Fault Circuit Interrupter (GFCI). Consult a

local electrician for installation and availability.

7.This pump is designed to transfer water in cycles. Using this pump in a continuous duty application by manipulating the switch to stay on, will effect the performance and the life of the product.

8.Protect electrical cord from sharp objects, hot surfaces, oil, and chemicals. Avoid kinking the cord. Replace or repair damaged or worn cords immediately. Use wire of adequate size to minimize voltage drop at the motor.

9.Do not handle a pump or pump motor with wet hands or when standing on a wet or damp surface, or in water.

Do NOT walk on

wet area until all power has been turned off. If the shut-off box is in basement, call the

electric company to shut-off service to the house, or call the local ﬁre department for instructions. Remove pump and repair or replace. Failure to follow this warning can result in fatal electrical shock.

Assembly

Assembly Instructions:

1.Remove packaging, including the foam inside the tank.

2.Apply gasket to top of tank, just outside the opening. (See Figure 1)

Figure 1: Adding Lid Gasket to Tank

REMINDER: Keep your dated proof of purchase for warranty purposes!

Attach it to this manual or file it for safekeeping.

© 2011, WAYNE Water Systems/Scott Fetzer.	For parts, product & service information	332800-001 3/11
	visit www.waynepumps.com

SYLT30 specifications

The Wayne SYLT30 is an innovative and advanced fuel dispenser designed for high-performance service stations, combining state-of-the-art technology with user-friendly interfaces. This model is particularly known for its robust construction, making it ideal for both high-volume and heavy-duty applications. Featuring a sleek and modern design, the SYLT30 seamlessly integrates into any fueling environment while ensuring operational efficiency and reliability.

One of the main features of the Wayne SYLT30 is its high-capacity fuel dispensing capability. With its ability to handle multiple fueling products, this dispenser can cater to a diverse customer base. It usually comes with multiple hose configurations, enabling simultaneous dispensing of different fuel types, including gasoline, diesel, and alternative fuels. This versatility allows service stations to meet diverse market demands effectively.

The technology behind the SYLT30 enhances not only performance but also user experience. It employs advanced electronic systems for precise fuel measurement and automatic shut-off features, helping to prevent overflows and ensuring safety during refueling operations. Additionally, the dispenser integrates innovative payment technologies, including contactless payment options and robust security features, ensuring quick and secure transactions for customers.

The SYLT30 is also equipped with an intuitive user interface that simplifies the fueling process. The clear display and easy-to-navigate menus guide users through the fueling process, providing information such as fuel type, price per gallon, and transaction totals. This technology significantly reduces wait times, improving overall customer satisfaction at the fueling station.

Moreover, the Wayne SYLT30 is built with durability in mind, using high-quality materials that withstand harsh environmental conditions. Its corrosion-resistant components ensure longevity, while regular maintenance is streamlined through easy access to internal parts. This reduces downtime and maintenance costs, making the SYLT30 a cost-effective choice for business owners.

In summary, the Wayne SYLT30 is a feature-rich fuel dispenser that combines cutting-edge technology, versatility, and durability. Its high-capacity dispensing, advanced safety features, user-friendly interface, and robust construction make it an optimal choice for service stations looking to enhance their fueling operations and improve customer service. As the fuel industry continues to evolve, models like the SYLT30 are paving the way for modern and efficient fueling solutions.