Wayne SYLT30 warranty Troubleshooting Chart, Problem Possible Causes Corrective Actions

Page 4

Operating Instructions and Parts Manual

Troubleshooting Chart

Problem

Possible Cause(s)

Corrective Action(s)

Pump will not start

1.

Blown fuse, tripped breaker

1.

If blown, replace with proper sized fuse or reset breaker

or run

2.

Low line voltage

2.

If voltage is under 108 volts, check wiring size. DO NOT USE

 

 

 

 

AN EXTENSION CORD

 

3.

Float obstructed

3.

Make sure float moves freely up and down

 

4.

Defective float switch

4.

Replace float switch (Recommended for at least every 2 years)

 

5.

Impeller bound-up

5.

If impeller will not turn, remove housing and remove blockage

 

6.

Defective motor

6.

Replace pump

 

 

 

 

 

Pump starts and

1.

Back-flow of water from

1.

Replace check valve

stops too often

 

piping

 

 

 

2.

Faulty float switch

2.

Replace float switch (Recommended for at least every 2 years)

 

 

 

 

 

Pump will not shut

1.

Defective float switch

1.

Replace float switch (Recommended for at least every 2 years)

off or thermal

2.

Obstacle in piping

2.

Remove pump; clean check valve, pump and piping

protector turns off

3.

Float obstructed

3.

Make sure float move freely up and down

 

 

 

 

 

Pump operates but

1.

Low line voltage

1.

If voltage is under 108 volts, check wiring size. DO NOT USE

delivers little or no

 

 

 

AN EXTENSION CORD

water

2.

Plugged impeller

2.

Clean out impeller

 

3.

Obstructed piping

3.

Remove pump and remove obstruction from piping or

 

 

 

 

reposition piping to prevent obstruction

 

4.

Excessive lift height (water

4.

Reposition pump to a suitable position to decrease lift height

 

 

has to go higher than pump

 

 

 

 

can handle)

 

 

 

 

 

 

 

www.waynepumps.com

4

Image 4
Contents Safety Guidelines General Safety InformationAssembly DescriptionInstallation Maintenance OperationOutlet Grounding BladeTroubleshooting Chart Problem Possible Causes Corrective ActionsFor Replacement Parts or Technical Assistance, Call Limited Warranty Déballage Directives de SécuritéGénéralités sur la Sécurité AssemblageInstructions dUtilisation et Pièces de Recahnge Assemblage suiteFilets sont de 3,8 cm 1 1/2 po NPT Broche de mise à la terre FonctionnementRisque de blessure Dépannage Problème Causes Possibles Mesures correctivesPour Pièces de Rechange ou Assistance Technique, Appeler Garantie Limitée Descripción DesempaqueMedidas de Seguridad EnsamblajeInstalación Funcionamiento MaintenimientoDiagnóstico y resolución de problemas Problema Causas posibles Acciones a tomarPara Ordenar Repuestos o Asistencia Técnica, llame Notas Notas Garantía Limitada

SYLT30 specifications

The Wayne SYLT30 is an innovative and advanced fuel dispenser designed for high-performance service stations, combining state-of-the-art technology with user-friendly interfaces. This model is particularly known for its robust construction, making it ideal for both high-volume and heavy-duty applications. Featuring a sleek and modern design, the SYLT30 seamlessly integrates into any fueling environment while ensuring operational efficiency and reliability.

One of the main features of the Wayne SYLT30 is its high-capacity fuel dispensing capability. With its ability to handle multiple fueling products, this dispenser can cater to a diverse customer base. It usually comes with multiple hose configurations, enabling simultaneous dispensing of different fuel types, including gasoline, diesel, and alternative fuels. This versatility allows service stations to meet diverse market demands effectively.

The technology behind the SYLT30 enhances not only performance but also user experience. It employs advanced electronic systems for precise fuel measurement and automatic shut-off features, helping to prevent overflows and ensuring safety during refueling operations. Additionally, the dispenser integrates innovative payment technologies, including contactless payment options and robust security features, ensuring quick and secure transactions for customers.

The SYLT30 is also equipped with an intuitive user interface that simplifies the fueling process. The clear display and easy-to-navigate menus guide users through the fueling process, providing information such as fuel type, price per gallon, and transaction totals. This technology significantly reduces wait times, improving overall customer satisfaction at the fueling station.

Moreover, the Wayne SYLT30 is built with durability in mind, using high-quality materials that withstand harsh environmental conditions. Its corrosion-resistant components ensure longevity, while regular maintenance is streamlined through easy access to internal parts. This reduces downtime and maintenance costs, making the SYLT30 a cost-effective choice for business owners.

In summary, the Wayne SYLT30 is a feature-rich fuel dispenser that combines cutting-edge technology, versatility, and durability. Its high-capacity dispensing, advanced safety features, user-friendly interface, and robust construction make it an optimal choice for service stations looking to enhance their fueling operations and improve customer service. As the fuel industry continues to evolve, models like the SYLT30 are paving the way for modern and efficient fueling solutions.