Porter-Cable PCL180L Maintenance, Troubleshooting Problem Possible Cause Possible Solution

Page 10

90546221 pc1800l pcl180l 1/5/09 12:34 PM Page 10

To replace the bulb:

1.Unscrew the lens holder (2).

2.Turn the bulb until the triangular cutout on the rim of the bulb lines up with the triangular notch shown in figure E.

3.Pull the bulb out and insert a new bulb by lining up the triangular notch and the triangular cutout. Turn the bulb a half turn to lock in place.

4.Reinstall the lens holder

NOTE: Do not look directly into the light beam.

E

 

TROUBLESHOOTING

 

PROBLEM

POSSIBLE CAUSE

POSSIBLE SOLUTION

• Light will not illuminate.

• Battery not installed properly.

• Check battery

 

 

installation.

 

• Battery not charged.

• Check battery

 

 

charging requirements.

 

• Light bulb needs replacing.

• Replace bulb as

 

 

outlined in this manual.

•Battery will not charge. • Battery not inserted into charger. • Insert battery into charger until LED appears.

• Charger not plugged in.

• Plug charger into a

 

working outlet. Refer to

 

“Important Charging

 

Notes” for more details.

For assistance with your product, visit our website at www.portercable.com for a list of service centers, or call the Porter-Cable Customer Care Center at (888)

848-5175.

THE RBRC™ SEAL

The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the NI-CD battery (or battery pack) indicates that the costs to recycle the battery (or battery pack) at the end of its useful life have already been paid by Porter-Cable.

RBRC™ in cooperation with Porter-Cable and other battery users, has established programs in the United States to facilitate the collection of spent NI-CD batteries. Help protect our environment and conserve natural resources by returning the spent NI-CD battery to an authorized Porter-Cable service center or to your local retailer for recycling. You may also contact your local recycling center for information on where to drop off the spent battery.

RBRC™ is a registered trademark of the Rechargeable Battery Recycling Corporation.

MAINTENANCE

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Catalog Number PCL180LGeneral Power Tool Safety Warnings Important Safety Instructions for Flashlights Safety Guidelines Definitions Important Safety Instructions for Battery Chargers Important Safety Instruction for Battery Packs Charging Procedure Battery CAP InformationStorage Recommendations HOT/COLD Pack Delay Charger DiagnosticsBAD Battery Problem Power LineSwitch Installing and Removing the Battery PackReplacing the Bulb Figure E Troubleshooting Problem Possible Cause Possible Solution MaintenanceRbrc Seal Replacement Parts Service and Repairs Three Year Limited Warranty90546221 pc1800l pcl180l 1/5/09 1234 PM DE Catalogue Une distraction pourrait vous en faire perdre la maîtrise 90546221 pc1800l pcl180l 1/5/09 1234 PM Conserver CES Directives Symboles Lignes Directrices EN Matière DE Sécurité DéfinitionsDescription De cat Lire Toutes LES Directives Information Concernant LE Capuchon DU BLOC-PILE Recommandations EN Matière DE RangementProcédure DE Charge Fonction DE Suspension DU BLOC-PILES CHAUD/FROID Fonctions DE Diagnostic DU ChargeurPile EN Mauvais État Problème Avec LE SecteurInsertion ET Retrait DU BLOC-PILES DE L’OUTIL Remplacement DE L’AMPOULE Figure EFonctionnement InterrupteurDépannage Problème Solution PossibleLE Sceau Srprcmc Pièces DE Rechange Entretien ET Réparation AccessoiresEntretien Garantie Limitée DE Trois ANSRemplacement DES Étiquettes D’AVERTISSEMENT Catálogo N 90546221 pc1800l pcl180l 1/5/09 1234 PM 90546221 pc1800l pcl180l 1/5/09 1234 PM Instrucciones DE Seguridad Importantes Para LAS Linternas Conserve LAS Instrucciones Pautas DE SEGURIDAD/DEFINICIONES SímbolosDescripción De cat Conserve Estas Instrucciones LEA Todas LAS InstruccionesRecomendaciones CON Respecto AL Almacenamiento Información Acerca DEL Protector DE LA BateríaProcedimiento DE Carga Batería EN MAL Estado Línea DE Potencia CON ProblemasDiagnóstico DEL Cargador Retraso POR Paquete CALIENTE/FRÍOInterruptor Instrucciones DE OperaciónReemplazo DE LA Bombilla Figura E Detección DE Problemas Causa Posible EL Sello RbrcAccesorios MantenimientoPiezas DE Repuesto Mantenimiento Y Reparaciones Garantía Limitada DE Tres AñosReemplazo DE LAS Etiquetas DE Advertencia 90546221 pc1800l pcl180l 1/5/09 1234 PM Pcmvc Pclmvc

PC1800L, PCL180L, 90546221 specifications

Porter-Cable has a strong reputation in the power tools industry, and the PCL180L, PC1800L, and 90546221 models showcase the brand’s commitment to quality and innovation. These tools are designed with features and technologies that meet the demands of both professionals and DIY enthusiasts.

The Porter-Cable PCL180L is a compact drill/driver that boasts a powerful 20V MAX Lithium-Ion battery, providing users with extended runtime and consistent power. One of its standout features is the high-performance motor, which delivers a torque of up to 400 in-lbs, enabling it to tackle a variety of drilling and fastening applications. The PCL180L is designed with a 1/2-inch keyless chuck that allows for quick and easy bit changes, enhancing productivity on the job site. Additionally, it incorporates a two-speed transmission, offering speeds of 0-350 RPM and 0-1500 RPM, making it versatile for different tasks.

The PC1800L complements the PCL180L with its robust design and functionality. This model is a cordless reciprocating saw equipped with a brushless motor that enhances efficiency and helps extend the tool’s lifespan. With its variable speed trigger, users have heightened control over cutting speed, allowing for precision in various materials such as wood, metal, and plastic. The tool’s lightweight design minimizes user fatigue, making it ideal for prolonged use. It also features a blade clamp that is compatible with a wide range of blades, ensuring versatility and adaptability to different projects.

The 90546221 is an essential accessory in the Porter-Cable lineup, as it provides replacement batteries specifically designed for the 20V MAX system. This Lithium-Ion battery is compatible with a broad range of Porter-Cable tools, thus expanding the usability and convenience factor for users. The battery includes a fuel gauge that allows users to easily check the remaining charge, ensuring they are never caught off guard during critical tasks.

All three models embody Porter-Cable’s commitment to reliability and efficiency, making them ideal choices for users seeking high-performance tools. Robust construction, ergonomic designs, and innovative technologies are hallmarks of these tools. Whether for professional applications or DIY projects, the PCL180L, PC1800L, and 90546221 deliver the performance and durability required to get the job done efficiently and effectively.
Top Page Image Contents