Porter-Cable 90546221 Charger Diagnostics, BAD Battery, HOT/COLD Pack Delay, Problem Power Line

Page 8

90546221 pc1800l pcl180l 1/5/09 12:34 PM Page 8

3. The LED will flash indicating that the battery is being charged.

4.The completion of charge is indicated by the LED remaining on continuously. The pack is fully charged and may be used at this time or left on the charger.

CHARGER DIAGNOSTICS

This charger is designed to detect certain problems that can arise with the battery packs or the power source. Problems are indicated by one LED flashing in different patterns.

BAD BATTERY

The charger can detect a weak or damaged battery. The LED flashes in the pattern indicated on the label. If you see this bad battery blink pattern, do not continue to charge the battery. Return it to a service center or a collection site for recycling.

HOT/COLD PACK DELAY

When the charger detects a battery that is excessively hot or excessively cold, it automatically starts a Hot/Cold Pack Delay, suspending charging until the battery has normalized. After this happens, the charger automatically switches to the Pack Charging mode. This feature ensures maximum battery life. The light flashes in the pattern indicated on the label.

PROBLEM POWER LINE

When the charger is used with some portable power sources such as generators or sources that convert DC to AC, the charger may temporarily suspend operation. The LED flashes in the pattern indicated on the label. This indicates that the power source is out of limits.

LEAVING THE BATTERY IN THE CHARGER

The charger and battery pack can be left connected with the LED glowing indefinitely. The charger will keep the battery pack fresh and fully charged. This charger features an automatic tune-up mode which equals or balances the individual cells in the battery pack to allow it to function at peak capacity. Battery packs should be tuned up weekly or whenever the battery no longer delivers the same amount of work. To use the automatic tune-up mode, place the battery pack in the charger and leave it for at least 8 hours.

IMPORTANT CHARGING NOTES

1.Longest life and best performance can be obtained if the battery pack is charged when the air temperature is between 65°F and 75°F (18°- 24°C). DO NOT charge the battery pack in an air temperature below +40°F (+4.5°C), or above +105°F (+40.5°C). This is important and will prevent serious damage to the battery pack.

2.The charger and battery pack may become warm to touch while charging. This is a normal condition, and does not indicate a problem. To facilitate the cooling of the battery pack after use, avoid placing the charger or battery pack in a warm environment such as in a metal shed, or an uninsulated trailer.

3.If the battery pack does not charge properly:

a.Check current at receptacle by plugging in a lamp or other appliance

b.Check to see if receptacle is connected to a light switch which turns power off when you turn out the lights.

c.Move charger and battery pack to a location where the surrounding air temperature is approximately 65°F - 75°F (18°- 24°C).

d.If charging problems persist, take the tool, battery pack and charger to your local service center.

4.The battery pack should be recharged when it fails to produce sufficient power on jobs which were easily done previously. DO NOT CONTINUE to use under these conditions. Follow the charging procedure. You may also charge a partially used pack whenever you desire with no adverse affect on the battery pack.

5.Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean.

6.Do not freeze or immerse charger in water or any other liquid.

WARNING: Shock hazard. Do not allow any liquid to get inside charger. Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, return to a service center for recycling.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Catalog Number PCL180LGeneral Power Tool Safety Warnings Important Safety Instructions for Flashlights Safety Guidelines Definitions Important Safety Instructions for Battery Chargers Important Safety Instruction for Battery Packs Storage Recommendations Battery CAP InformationCharging Procedure Charger Diagnostics BAD BatteryHOT/COLD Pack Delay Problem Power LineReplacing the Bulb Figure E Installing and Removing the Battery PackSwitch Rbrc Seal MaintenanceTroubleshooting Problem Possible Cause Possible Solution Replacement Parts Service and Repairs Three Year Limited Warranty90546221 pc1800l pcl180l 1/5/09 1234 PM DE Catalogue Une distraction pourrait vous en faire perdre la maîtrise 90546221 pc1800l pcl180l 1/5/09 1234 PM Conserver CES Directives Symboles Lignes Directrices EN Matière DE Sécurité DéfinitionsDescription De cat Lire Toutes LES Directives Procédure DE Charge Recommandations EN Matière DE RangementInformation Concernant LE Capuchon DU BLOC-PILE Fonctions DE Diagnostic DU Chargeur Pile EN Mauvais ÉtatFonction DE Suspension DU BLOC-PILES CHAUD/FROID Problème Avec LE SecteurRemplacement DE L’AMPOULE Figure E FonctionnementInsertion ET Retrait DU BLOC-PILES DE L’OUTIL InterrupteurLE Sceau Srprcmc Solution PossibleDépannage Problème Accessoires EntretienPièces DE Rechange Entretien ET Réparation Garantie Limitée DE Trois ANSRemplacement DES Étiquettes D’AVERTISSEMENT Catálogo N 90546221 pc1800l pcl180l 1/5/09 1234 PM 90546221 pc1800l pcl180l 1/5/09 1234 PM Instrucciones DE Seguridad Importantes Para LAS Linternas Conserve LAS Instrucciones Pautas DE SEGURIDAD/DEFINICIONES SímbolosDescripción De cat Conserve Estas Instrucciones LEA Todas LAS InstruccionesProcedimiento DE Carga Información Acerca DEL Protector DE LA BateríaRecomendaciones CON Respecto AL Almacenamiento Línea DE Potencia CON Problemas Diagnóstico DEL CargadorBatería EN MAL Estado Retraso POR Paquete CALIENTE/FRÍOReemplazo DE LA Bombilla Figura E Instrucciones DE OperaciónInterruptor Detección DE Problemas Causa Posible EL Sello RbrcMantenimiento Piezas DE Repuesto Mantenimiento Y ReparacionesAccesorios Garantía Limitada DE Tres AñosReemplazo DE LAS Etiquetas DE Advertencia 90546221 pc1800l pcl180l 1/5/09 1234 PM Pcmvc Pclmvc

PC1800L, PCL180L, 90546221 specifications

Porter-Cable has a strong reputation in the power tools industry, and the PCL180L, PC1800L, and 90546221 models showcase the brand’s commitment to quality and innovation. These tools are designed with features and technologies that meet the demands of both professionals and DIY enthusiasts.

The Porter-Cable PCL180L is a compact drill/driver that boasts a powerful 20V MAX Lithium-Ion battery, providing users with extended runtime and consistent power. One of its standout features is the high-performance motor, which delivers a torque of up to 400 in-lbs, enabling it to tackle a variety of drilling and fastening applications. The PCL180L is designed with a 1/2-inch keyless chuck that allows for quick and easy bit changes, enhancing productivity on the job site. Additionally, it incorporates a two-speed transmission, offering speeds of 0-350 RPM and 0-1500 RPM, making it versatile for different tasks.

The PC1800L complements the PCL180L with its robust design and functionality. This model is a cordless reciprocating saw equipped with a brushless motor that enhances efficiency and helps extend the tool’s lifespan. With its variable speed trigger, users have heightened control over cutting speed, allowing for precision in various materials such as wood, metal, and plastic. The tool’s lightweight design minimizes user fatigue, making it ideal for prolonged use. It also features a blade clamp that is compatible with a wide range of blades, ensuring versatility and adaptability to different projects.

The 90546221 is an essential accessory in the Porter-Cable lineup, as it provides replacement batteries specifically designed for the 20V MAX system. This Lithium-Ion battery is compatible with a broad range of Porter-Cable tools, thus expanding the usability and convenience factor for users. The battery includes a fuel gauge that allows users to easily check the remaining charge, ensuring they are never caught off guard during critical tasks.

All three models embody Porter-Cable’s commitment to reliability and efficiency, making them ideal choices for users seeking high-performance tools. Robust construction, ergonomic designs, and innovative technologies are hallmarks of these tools. Whether for professional applications or DIY projects, the PCL180L, PC1800L, and 90546221 deliver the performance and durability required to get the job done efficiently and effectively.
Top Page Image Contents