Porter-Cable PC1800L, PCL180L, 90546221 Important Safety Instructions for Flashlights

Page 3

90546221 pc1800l pcl180l 1/5/09 12:34 PM Page 3

The correct power tool will do the job better and safer at the rate for which it was designed.

b)Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c)Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g)Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5)Battery tool use and care

a)Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

b)Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

c)When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

d)Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

6)Service

a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

IMPORTANT SAFETY

INSTRUCTIONS FOR FLASHLIGHTS

WARNING: WHEN USING ELECTRIC APPLIANCES, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:

•READ ALL THE INSTRUCTIONS BEFORE USING THE APPLIANCE.

•To reduce the risk of injury, close supervision is necessary when an appliance is used

near children.

•Only use attachments recommended or sold by the manufacturer.

•To reduce the risk of electrical shock, do not put light in water or other liquid. Do not place or store appliance where it can fall or be pulled into a tub or sink.

•Use only the charger supplied by the manufacturer to recharge.

•During or immediately after use, don’t lay light flat on lens surface.

•Replace broken bulb in a well ventilated area.

•Don’t touch lens surface when bulb is lit or immediately after use.

•Handle light with care around any flammable surface.

•Do not expose light or charger to wet or damp areas. Do not expose light or charger to rain or snow.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents PCL180L Catalog NumberGeneral Power Tool Safety Warnings Important Safety Instructions for Flashlights Safety Guidelines Definitions Important Safety Instructions for Battery Chargers Important Safety Instruction for Battery Packs Battery CAP Information Charging ProcedureStorage Recommendations Problem Power Line Charger DiagnosticsBAD Battery HOT/COLD Pack DelayInstalling and Removing the Battery Pack SwitchReplacing the Bulb Figure E Maintenance Troubleshooting Problem Possible Cause Possible SolutionRbrc Seal Three Year Limited Warranty Replacement Parts Service and Repairs90546221 pc1800l pcl180l 1/5/09 1234 PM DE Catalogue Une distraction pourrait vous en faire perdre la maîtrise 90546221 pc1800l pcl180l 1/5/09 1234 PM Conserver CES Directives Lignes Directrices EN Matière DE Sécurité Définitions SymbolesDescription De cat Lire Toutes LES Directives Recommandations EN Matière DE Rangement Information Concernant LE Capuchon DU BLOC-PILEProcédure DE Charge Problème Avec LE Secteur Fonctions DE Diagnostic DU ChargeurPile EN Mauvais État Fonction DE Suspension DU BLOC-PILES CHAUD/FROIDInterrupteur Remplacement DE L’AMPOULE Figure EFonctionnement Insertion ET Retrait DU BLOC-PILES DE L’OUTILSolution Possible Dépannage ProblèmeLE Sceau Srprcmc Garantie Limitée DE Trois ANS AccessoiresEntretien Pièces DE Rechange Entretien ET RéparationRemplacement DES Étiquettes D’AVERTISSEMENT Catálogo N 90546221 pc1800l pcl180l 1/5/09 1234 PM 90546221 pc1800l pcl180l 1/5/09 1234 PM Instrucciones DE Seguridad Importantes Para LAS Linternas Símbolos Conserve LAS Instrucciones Pautas DE SEGURIDAD/DEFINICIONESDescripción De cat LEA Todas LAS Instrucciones Conserve Estas InstruccionesInformación Acerca DEL Protector DE LA Batería Recomendaciones CON Respecto AL AlmacenamientoProcedimiento DE Carga Retraso POR Paquete CALIENTE/FRÍO Línea DE Potencia CON ProblemasDiagnóstico DEL Cargador Batería EN MAL EstadoInstrucciones DE Operación InterruptorReemplazo DE LA Bombilla Figura E EL Sello Rbrc Detección DE Problemas Causa PosibleGarantía Limitada DE Tres Años MantenimientoPiezas DE Repuesto Mantenimiento Y Reparaciones AccesoriosReemplazo DE LAS Etiquetas DE Advertencia 90546221 pc1800l pcl180l 1/5/09 1234 PM Pcmvc Pclmvc

PC1800L, PCL180L, 90546221 specifications

Porter-Cable has a strong reputation in the power tools industry, and the PCL180L, PC1800L, and 90546221 models showcase the brand’s commitment to quality and innovation. These tools are designed with features and technologies that meet the demands of both professionals and DIY enthusiasts.

The Porter-Cable PCL180L is a compact drill/driver that boasts a powerful 20V MAX Lithium-Ion battery, providing users with extended runtime and consistent power. One of its standout features is the high-performance motor, which delivers a torque of up to 400 in-lbs, enabling it to tackle a variety of drilling and fastening applications. The PCL180L is designed with a 1/2-inch keyless chuck that allows for quick and easy bit changes, enhancing productivity on the job site. Additionally, it incorporates a two-speed transmission, offering speeds of 0-350 RPM and 0-1500 RPM, making it versatile for different tasks.

The PC1800L complements the PCL180L with its robust design and functionality. This model is a cordless reciprocating saw equipped with a brushless motor that enhances efficiency and helps extend the tool’s lifespan. With its variable speed trigger, users have heightened control over cutting speed, allowing for precision in various materials such as wood, metal, and plastic. The tool’s lightweight design minimizes user fatigue, making it ideal for prolonged use. It also features a blade clamp that is compatible with a wide range of blades, ensuring versatility and adaptability to different projects.

The 90546221 is an essential accessory in the Porter-Cable lineup, as it provides replacement batteries specifically designed for the 20V MAX system. This Lithium-Ion battery is compatible with a broad range of Porter-Cable tools, thus expanding the usability and convenience factor for users. The battery includes a fuel gauge that allows users to easily check the remaining charge, ensuring they are never caught off guard during critical tasks.

All three models embody Porter-Cable’s commitment to reliability and efficiency, making them ideal choices for users seeking high-performance tools. Robust construction, ergonomic designs, and innovative technologies are hallmarks of these tools. Whether for professional applications or DIY projects, the PCL180L, PC1800L, and 90546221 deliver the performance and durability required to get the job done efficiently and effectively.
Top Page Image Contents