Nilfisk-ALTO 46/53 manual Brake Service, Adjusting the Brake Pedal, Adjusting the Brakes

Page 41

SERVICE INSTRUCTIONS

BRAKE SERVICE

 

CABLE

 

LH BRAKE LINK

 

BRAKE PEDAL PIVOT

 

PARKING BRAKE PEDAL

 

CABLE

 

JAM NUT

 

PULL ROD

 

BRAKE PEDAL

 

BRAKE PEDAL LINK

C1720batt

FIGURE 39

BRAKES

The service brakes are located on the front wheels and are operated by the brake pedal and the parking brake. Check the brakes daily for proper operation and inspect the brake pads for wear every 100 hours of operation.

ADJUSTING THE BRAKE PEDAL

Perform this adjustment to ensure proper pedal height and linkage operation. The brakes are properly adjusted when the brakes hold the sweeper on an 8-degree ramp. The brakes need adjusted if the pedal travels closer than 1” to the floor of the operator’s compartment when the brakes are fully engaged.

WARNING

Always park on a level surface, chock tires and observe safety procedures when adjusting the brakes.

ADJUSTING THE BRAKES

When adjusting the brake clevis, follow these steps:

1.Right hand brake cable slack.

2.Adjust parking brake for maximum engagement.

3.With parking brake “off,” check L.H. wheel which should rotate with minimum drag. (Not completely free)

4.Adjust R.H. brake to provide minimum drag when released.

American-Lincoln

1-41

ATS 46/53 Battery

 

Image 41
Contents American-Lincoln Technology Table of Contents American-Lincoln ATS 46/53 Battery Options Specifications Squeegee WarrantyTanks HopperMachine Dimensions SAE Grade Standard Hardware & Torque ValuesHydraulic Torque Requirements Hydraulic Torque RequirementsDECIMAL-METRIC Conversion Table DECIMAL-METRIC Conversion TablePreparing the Machine for Operation Machine PreparationRead the Instruction Book Safety InstructionsSafety Instructions Safety Instructions Horn Button See Figure Light Switch See FigureOperation of Controls and Gauges FORWARD/REVERSE Switch See Figure KEY Switch See FigureCombination Battery Condition & Hour Meter Seat Position Adjustment See FigureTo Engage the Safety ARM Filter Shaker SwitchMain Broom Adjustment See Figure Side Broom Adjustment See figureSide Broom Lever Side Broom Lever See FigureSqueegee Switch See Figure Dust Control Switch See FigureScrub Deck Switch See Figure NON-RECYCLING or Standard Scrubbing System Solution Control See FigureRecycling or ESP & Autofil System To Disconnect Water HoseSolution LOW Light Hopper Temperature Light OptionRecovery High Light Charging System LightParking Brake Foot Pedal AcceleratorBrake Pedal Hopper Dump Door Lever See Figure Hopper Lift Lever See FigureBACK-UP Alarm Switch Option See Figure C1702batt Turn Signal 4-Way Option See FigureC1718 C1719Filter Panel Latch See Figure Front Cover Latch See FigureLevel Sight Gauge Hydraulic ReservoirHydraulic Reservoir Level Sight Gauge Main Broom Compartment Doors See FigureHopper Filter Cover See Figure Hopper Door Lever See FigureESP System Operating Instructions Recycling System Detergent LOW ON/OFF SwitchNON-RECYCLING or Standard Scrubbing System HOW IT Works Solution Tank Detergent Tank RecoveryScrubbing System HOW IT Works Orifice Recovery or ESP and Autofil System HOW IT WorksCheck Floor ContactOperating Instructions Battery Charging Instructions POST-OPERATION ChecklistStorage for BATTERY-POWERED Machines Emptying the Debris HopperMain Aisle Helpful Hints for Cleaning OperationService Chart Service ChartHour Weekly Maintenance Checklist Hour Maintenance ChecklistFront Service Precautions Service PrecautionsService Instructions Replacing the Side Broom Side Broom ServiceCleaning the Hopper Hopper ServiceCleaning the Dust Control Filter Checking the Hopper SealsDust Flaps Replacing the Dust Control FilterAdjusting the Brake Pedal Brake ServiceAdjusting the Brakes BrakesCleaning the Hydraulic System General Machine MaintenanceFill Hydraulic Reservoir Filling the Hydraulic ReservoirRecovery High Warning Light Solution LOW Warning LightBrush Latch Replacing the Scrub BrushRecycling Pump ESP System Adjusting CastersRecycling Pump Storage Rear SqueegeeBattery Abbreviations Screws Parts List LegendGeneral Troubleshooting Problem Probable Cause RemedyCheck & repair. orSereplaceahC -.Lynn Internet Alto Headquarters Ordering Parts

46/53 specifications

The Nilfisk-ALTO 46/53 is a powerful and versatile range of professional vacuum cleaners designed to meet the demanding needs of various cleaning applications. Known for their efficiency and reliability, these models are ideal for both commercial and industrial environments. With a robust construction, the Nilfisk-ALTO 46/53 series is built to withstand the wear and tear of daily use.

One of the standout features of the Nilfisk-ALTO 46/53 is its impressive suction power. Equipped with high-efficiency motors, these vacuum cleaners ensure optimal performance while consuming less energy. This not only enhances productivity but also contributes to cost savings and environmental sustainability.

The design of the Nilfisk-ALTO 46/53 is user-friendly, featuring an ergonomic handle and lightweight construction that make it easy to maneuver in tight spaces. Its compact design does not compromise on the capacity, as the model comes with a generous tank size, allowing for extended cleaning sessions without frequent interruptions for disposal.

Another notable characteristic of the Nilfisk-ALTO 46/53 is its advanced filtration system. The vacuum includes a HEPA filter, which captures fine dust and allergens, ensuring a cleaner and healthier environment. This feature is particularly beneficial in settings where air quality is critical, such as hospitals and laboratories.

In terms of versatility, the Nilfisk-ALTO 46/53 is equipped with various accessories and attachments designed to tackle different surfaces and cleaning tasks. From upholstery to hard floors, the adjustable settings and specialized tools ensure that users can achieve optimal results no matter the job at hand.

The Nilfisk-ALTO 46/53 also boasts noise reduction technology, making it suitable for use in noise-sensitive environments. Its low operational noise allows cleaning to occur without disturbing customers or staff, which is a major advantage for businesses operating during hours of high foot traffic.

In summary, the Nilfisk-ALTO 46/53 range combines powerful suction, advanced filtration, and user-friendly features into a single cleaning solution. Whether for commercial, industrial, or professional use, this vacuum cleaner stands out as a reliable option that meets a wide variety of cleaning needs while promoting efficiency and health.