Nilfisk-ALTO 46/53 manual KEY Switch See Figure, FORWARD/REVERSE Switch See Figure

Page 16

OPERATION OF CONTROLS AND GAUGES

 

KEY

 

KEY SWITCH (See Figure 3)

 

SWITCH

 

The keyed ignition switch is located on the instrument

 

 

 

panel to the left of the side broom lever. The key switch is

 

 

 

a two-position switch that controls power to the machine

 

 

 

systems and accessories. The “OFF” position (O position)

 

 

 

will shut off the machine. The IGN/ON position (I position)

 

 

 

provides power to the machine and all its systems and

 

 

 

accessories.

 

 

 

NOTE

 

 

 

The operator should never leave the machine

 

 

 

unattended while it is on.

 

 

 

FORWARD/REVERSE SWITCH (See Figure 3)

 

 

 

A two-position switch controls the machine’s direction and

 

 

 

is located on the righthand side of the instrument panel

 

 

FWD/REV

directly below the key switch. Pushing the upper portion of

 

 

the switch will provide forward motion when the foot pedal

 

 

SWITCH

C1631A-batt

FIGURE 3

is pressed. Pushing the bottom portion of the switch will

 

 

make the machine move in reverse when the foot pedal is

 

 

 

 

 

 

pressed.

 

 

 

NOTE

 

 

 

The machine will not move if:

 

 

 

The operator is not seated properly in the operator’s

 

 

 

compartment due to the Seat Switch Interlock safety

 

 

 

feature; or if the foot pedal is depressed or depressed too

 

 

 

quickly after turning the key switch on as a result of the High

 

 

 

Pedal Disable safety feature. (See “MillipaK SEM Controller”)

 

 

 

COMBINATION BATTERY CONDITION & HOUR METER

 

 

 

(See Figure 4)

 

 

BATTERY

The combination battery condition and hour meter is

 

 

located on the instrument panel next to the warning bank.

 

HOUR

CONDITION

The meter is activated when the key switch is placed in the

 

METER

METER

ignition position. The hour meter indicates the actual “run”

 

time of the machine and can be used to determine ma-

 

 

 

chine maintenance intervals.

C1633-batt

FIGURE 4

 

The battery condition meter indicates the charge level of

 

 

 

the batteries. The batteries are sufficiently charged if all

 

SEAT

 

the amber LEDs are illuminated during the machine’s

 

 

operation.

POSITION

 

 

ADJUSTMENT

 

If the LED on the far left displays red while using the

 

LEVER

 

machine, the low voltage lockout safety feature will shut

 

 

 

down the scrub deck’s operation. The batteries must now

 

 

 

be fully charged in order to reset the low voltage lockout

 

 

 

and continue the cleaning operation.

 

 

 

SEAT POSITION ADJUSTMENT (See Figure 5)

 

 

 

The seat position adjustment lever is located on the right

TO

 

 

side of the seat base. The lever is spring loaded to the

 

TO ADJUST

“LOCK” position.

LOCK

C-0508a

 

 

To adjust the seat, push “FORWARD” on the lever and

 

 

move the seat to the desired position. Then release the

 

 

 

C0508A-2

FIGURE 5

 

lever to “LOCK” the seat into place.

 

 

1-16

 

 

American-Lincoln

 

 

 

ATS 46-53 Battery

Page 15 Page 17
Image 16
Page 15 Page 17
Contents American-Lincoln Technology Table of Contents American-Lincoln ATS 46/53 Battery Options Specifications Warranty SqueegeeTanks HopperMachine Dimensions Standard Hardware & Torque Values SAE GradeHydraulic Torque Requirements Hydraulic Torque RequirementsDECIMAL-METRIC Conversion Table DECIMAL-METRIC Conversion TableMachine Preparation Preparing the Machine for OperationSafety Instructions Read the Instruction BookSafety Instructions Safety Instructions Operation of Controls and Gauges Light Switch See FigureHorn Button See Figure KEY Switch See Figure FORWARD/REVERSE Switch See FigureCombination Battery Condition & Hour Meter Seat Position Adjustment See FigureFilter Shaker Switch To Engage the Safety ARMSide Broom Adjustment See figure Main Broom Adjustment See FigureSide Broom Lever Side Broom Lever See FigureScrub Deck Switch See Figure Dust Control Switch See FigureSqueegee Switch See Figure Solution Control See Figure NON-RECYCLING or Standard Scrubbing SystemRecycling or ESP & Autofil System To Disconnect Water HoseHopper Temperature Light Option Solution LOW LightRecovery High Light Charging System LightBrake Pedal Foot Pedal AcceleratorParking Brake Hopper Lift Lever See Figure Hopper Dump Door Lever See FigureC1702batt Turn Signal 4-Way Option See Figure BACK-UP Alarm Switch Option See FigureC1719 C1718Filter Panel Latch See Figure Front Cover Latch See FigureHydraulic Reservoir Level Sight GaugeHydraulic Reservoir Level Sight Gauge Main Broom Compartment Doors See FigureHopper Door Lever See Figure Hopper Filter Cover See FigureRecycling System Detergent LOW ON/OFF Switch ESP System Operating InstructionsScrubbing System HOW IT Works Solution Tank Detergent Tank RecoveryNON-RECYCLING or Standard Scrubbing System HOW IT Works Recovery or ESP and Autofil System HOW IT Works OrificeCheck Floor ContactOperating Instructions POST-OPERATION Checklist Battery Charging InstructionsStorage for BATTERY-POWERED Machines Emptying the Debris HopperHelpful Hints for Cleaning Operation Main AisleService Chart Service ChartHour Weekly Maintenance Checklist Hour Maintenance ChecklistFront Service Precautions Service PrecautionsService Instructions Side Broom Service Replacing the Side BroomHopper Service Cleaning the HopperCleaning the Dust Control Filter Checking the Hopper SealsReplacing the Dust Control Filter Dust FlapsBrake Service Adjusting the Brake PedalAdjusting the Brakes BrakesGeneral Machine Maintenance Cleaning the Hydraulic SystemFill Hydraulic Reservoir Filling the Hydraulic ReservoirSolution LOW Warning Light Recovery High Warning LightBrush Latch Replacing the Scrub BrushAdjusting Casters Recycling Pump ESP SystemRecycling Pump Storage Rear SqueegeeBattery Parts List Legend Abbreviations ScrewsProblem Probable Cause Remedy General TroubleshootingCheck & repair. orSereplaceahC -.Lynn Ordering Parts Internet Alto Headquarters

46/53 specifications

The Nilfisk-ALTO 46/53 is a powerful and versatile range of professional vacuum cleaners designed to meet the demanding needs of various cleaning applications. Known for their efficiency and reliability, these models are ideal for both commercial and industrial environments. With a robust construction, the Nilfisk-ALTO 46/53 series is built to withstand the wear and tear of daily use.

One of the standout features of the Nilfisk-ALTO 46/53 is its impressive suction power. Equipped with high-efficiency motors, these vacuum cleaners ensure optimal performance while consuming less energy. This not only enhances productivity but also contributes to cost savings and environmental sustainability.

The design of the Nilfisk-ALTO 46/53 is user-friendly, featuring an ergonomic handle and lightweight construction that make it easy to maneuver in tight spaces. Its compact design does not compromise on the capacity, as the model comes with a generous tank size, allowing for extended cleaning sessions without frequent interruptions for disposal.

Another notable characteristic of the Nilfisk-ALTO 46/53 is its advanced filtration system. The vacuum includes a HEPA filter, which captures fine dust and allergens, ensuring a cleaner and healthier environment. This feature is particularly beneficial in settings where air quality is critical, such as hospitals and laboratories.

In terms of versatility, the Nilfisk-ALTO 46/53 is equipped with various accessories and attachments designed to tackle different surfaces and cleaning tasks. From upholstery to hard floors, the adjustable settings and specialized tools ensure that users can achieve optimal results no matter the job at hand.

The Nilfisk-ALTO 46/53 also boasts noise reduction technology, making it suitable for use in noise-sensitive environments. Its low operational noise allows cleaning to occur without disturbing customers or staff, which is a major advantage for businesses operating during hours of high foot traffic.

In summary, the Nilfisk-ALTO 46/53 range combines powerful suction, advanced filtration, and user-friendly features into a single cleaning solution. Whether for commercial, industrial, or professional use, this vacuum cleaner stands out as a reliable option that meets a wide variety of cleaning needs while promoting efficiency and health.
Top Page Image Contents