Nilfisk-ALTO 46/53 manual Charging System Light, Clogged Filter Light Option, Solution LOW Light

Page 21

 

OPERATION OF CONTROLS AND GAUGES

 

WARNING

 

BANK

CHARGING SYSTEM

RECOVERY

LIGHT

HIGH

 

LIGHT

 

CLOGGED

 

FILTER LIGHT

SOLUTION

HOPPER

LOW LIGHT

TEMP

 

LIGHT

C1636batt

FIGURE 15

WARNING BANK (See Figure 15)

The Warning Bank is located on the instrument panel and provides the operator with fault/status indicators for engine and sweeper systems. The operator should monitor the indicators while sweeping. It is very important that the operator be familiar with the meaning of each indicator.

CHARGING SYSTEM LIGHT

The charging system light illuminates to indicate a charging system fault. When this occurs the machines charging system is not working properly, have the machine serviced by a qualified service technician.

CLOGGED FILTER LIGHT (Option)

The clogged filter light illuminates to indicate that the dust control filter is clogged. When this occurs, stop the machine and use the filter shaker to clear the dirt and debris from the filter. After using the filter shaker, continue sweeping.

HOPPER TEMPERATURE LIGHT (Option)

When the temperature of the air moving through the hopper dust control system exceeds 140° F, an automatic protection feature shuts down the dust control fan and illuminates the hopper tem- perature light. When this occurs, shut down the machine and carefully investigate for a possible fire in the hopper, then manually reset the switch.

SOLUTION LOW LIGHT

The solution low warning light will illuminate when the solution tank is empty, indicating the end of the scrubbing cycle.

RECOVERY HIGH LIGHT

The recovery high warning light will illuminate approximately 5 minutes before the recovery tank is full, giving ample time to complete the scrubbing cycle, before the mechanical float shuts off the

vacuum to the recovery tank.

American-Lincoln

1-21

ATS 46/53 Battery

 

Page 20 Page 22
Image 21
Page 20 Page 22
Contents American-Lincoln Technology Table of Contents American-Lincoln ATS 46/53 Battery Options Specifications Squeegee WarrantyTanks HopperMachine Dimensions SAE Grade Standard Hardware & Torque ValuesHydraulic Torque Requirements Hydraulic Torque RequirementsDECIMAL-METRIC Conversion Table DECIMAL-METRIC Conversion TablePreparing the Machine for Operation Machine PreparationRead the Instruction Book Safety InstructionsSafety Instructions Safety Instructions Light Switch See Figure Operation of Controls and GaugesHorn Button See Figure FORWARD/REVERSE Switch See Figure KEY Switch See FigureCombination Battery Condition & Hour Meter Seat Position Adjustment See FigureTo Engage the Safety ARM Filter Shaker SwitchMain Broom Adjustment See Figure Side Broom Adjustment See figureSide Broom Lever Side Broom Lever See FigureDust Control Switch See Figure Scrub Deck Switch See FigureSqueegee Switch See Figure NON-RECYCLING or Standard Scrubbing System Solution Control See FigureRecycling or ESP & Autofil System To Disconnect Water HoseSolution LOW Light Hopper Temperature Light OptionRecovery High Light Charging System LightFoot Pedal Accelerator Brake PedalParking Brake Hopper Dump Door Lever See Figure Hopper Lift Lever See FigureBACK-UP Alarm Switch Option See Figure C1702batt Turn Signal 4-Way Option See FigureC1718 C1719Filter Panel Latch See Figure Front Cover Latch See FigureLevel Sight Gauge Hydraulic ReservoirHydraulic Reservoir Level Sight Gauge Main Broom Compartment Doors See FigureHopper Filter Cover See Figure Hopper Door Lever See FigureESP System Operating Instructions Recycling System Detergent LOW ON/OFF SwitchSolution Tank Detergent Tank Recovery Scrubbing System HOW IT WorksNON-RECYCLING or Standard Scrubbing System HOW IT Works Orifice Recovery or ESP and Autofil System HOW IT WorksCheck Floor ContactOperating Instructions Battery Charging Instructions POST-OPERATION ChecklistStorage for BATTERY-POWERED Machines Emptying the Debris HopperMain Aisle Helpful Hints for Cleaning OperationService Chart Service ChartHour Weekly Maintenance Checklist Hour Maintenance ChecklistFront Service Precautions Service PrecautionsService Instructions Replacing the Side Broom Side Broom ServiceCleaning the Hopper Hopper ServiceCleaning the Dust Control Filter Checking the Hopper SealsDust Flaps Replacing the Dust Control FilterAdjusting the Brake Pedal Brake ServiceAdjusting the Brakes BrakesCleaning the Hydraulic System General Machine MaintenanceFill Hydraulic Reservoir Filling the Hydraulic ReservoirRecovery High Warning Light Solution LOW Warning LightBrush Latch Replacing the Scrub BrushRecycling Pump ESP System Adjusting CastersRecycling Pump Storage Rear SqueegeeBattery Abbreviations Screws Parts List LegendGeneral Troubleshooting Problem Probable Cause RemedyCheck & repair. orSereplaceahC -.Lynn Internet Alto Headquarters Ordering Parts

46/53 specifications

The Nilfisk-ALTO 46/53 is a powerful and versatile range of professional vacuum cleaners designed to meet the demanding needs of various cleaning applications. Known for their efficiency and reliability, these models are ideal for both commercial and industrial environments. With a robust construction, the Nilfisk-ALTO 46/53 series is built to withstand the wear and tear of daily use.

One of the standout features of the Nilfisk-ALTO 46/53 is its impressive suction power. Equipped with high-efficiency motors, these vacuum cleaners ensure optimal performance while consuming less energy. This not only enhances productivity but also contributes to cost savings and environmental sustainability.

The design of the Nilfisk-ALTO 46/53 is user-friendly, featuring an ergonomic handle and lightweight construction that make it easy to maneuver in tight spaces. Its compact design does not compromise on the capacity, as the model comes with a generous tank size, allowing for extended cleaning sessions without frequent interruptions for disposal.

Another notable characteristic of the Nilfisk-ALTO 46/53 is its advanced filtration system. The vacuum includes a HEPA filter, which captures fine dust and allergens, ensuring a cleaner and healthier environment. This feature is particularly beneficial in settings where air quality is critical, such as hospitals and laboratories.

In terms of versatility, the Nilfisk-ALTO 46/53 is equipped with various accessories and attachments designed to tackle different surfaces and cleaning tasks. From upholstery to hard floors, the adjustable settings and specialized tools ensure that users can achieve optimal results no matter the job at hand.

The Nilfisk-ALTO 46/53 also boasts noise reduction technology, making it suitable for use in noise-sensitive environments. Its low operational noise allows cleaning to occur without disturbing customers or staff, which is a major advantage for businesses operating during hours of high foot traffic.

In summary, the Nilfisk-ALTO 46/53 range combines powerful suction, advanced filtration, and user-friendly features into a single cleaning solution. Whether for commercial, industrial, or professional use, this vacuum cleaner stands out as a reliable option that meets a wide variety of cleaning needs while promoting efficiency and health.
Top Page Image Contents