Generac Power Systems H-100 technical manual Generator

Page 20

General Information

H-100 Control Panel Technical Manual

Each line displays a maintenance item that has been set up via GenLink. The value displayed is the approximate % of life remaining before maintenance should be performed. Refer to the Maintenance setup using GenLink.

Press the “ENTER” button.

This is a typical third Maintenance Status page. Each line displays a maintenance item that has been set up via GenLink. The value displayed is the approxi- mate % of life remaining before maintenance should be performed. Refer to the Maintenance setup using GenLink.

Press the “ENTER” button.

This is a typical fourth Maintenance Status page. The first line is the display contrast. The display contrast is able to be changed on this page. However, changing this setting can result in the display becoming non- readable. Use caution. Use the arrow buttons to go to the contrast field. Press the “ENTER” button to enter edit mode. Use the arrow buttons to change the con- trast value (range is 00 to 37). Pressing the “HOME” button while in edit mode will return the value to the last entered value. Press the “ENTER” button to exit edit mode.

GENERATOR

There are three Generator Parameter pages – voltage parameters, power parameters, and i2t parameters.

Do the following to view the generator parameter pages:

Press the “MENU” button.

Press the button and then the button.

Press the “ENTER” button.

This is a typical first Generator Parameter page for a three phase system.

LINE 1: Phase titles for the voltage and current.

LINE 2: Line-to-Line voltages in Volts RMS.

LINE 3: Line currents in Amps RMS.

LINE 4: Generator frequency in Hz followed by the “More” field to allow page selection.

The voltages can be converted to values representing the line-to-neutral voltages by changing the title line (first line) using edit mode. Use the arrow buttons to move to one of the title fields – A-B, B-C, or C-A. Press the “ENTER” button to enter edit mode. Use the up or down arrow button to change the display to A-N, B-N, and C-N. Press the “ENTER” button to exit edit mode. The same process is followed to return to line-to-line displays. This also affects the left display voltage page.

18

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Control Panel Technical Manual  General Hazards  Authorized Service Dealer Location Inside Front CoverFeatures Panel SetupIntroduction ‹ CustomizationMeasurement Engine ‹ Analog Channels‹ Analog Maths Then‹ Analog Alarms Output Functions ‹ Other Analog Options‹ Spare Analog Channels ‹ Analog Sensor Ratings‹ Engine Settings Engine Management‹ Generator Parameters Parameter UnitsStarting and Stopping Sequence Diagrams CLOSED?Governor Speed Regulator Option Voltage Regulator Option ChartVoltage Regulator Option ‹ Remote Trending Governor Speed Regulator Option ChartTrending ‹ Local Trending ‹ Genlink Local Trending SetupILC Front Panel Display ‹ Left Display Pages‹ Left Display ‹ Right DisplayAlrm Log SwitchVolts Power ‹ AlarmsGraph Hz OtherEngine General Information Status Service Generator Diagnostics General Information EXERCISE/HTS TDN Alarm LOG HomeControl Panel Event LOGI2T Current Monitoring Option Maintenance SettingsAIR/FUEL Ratio Control Option Quiettest Setup Using Genlink Internal Exercise FunctionNormal Exercise Setup Using Genlink Quiettest Setup Using Front Panel General Information General Information Normal Exercise Setup Using Front Panel General Information General Information SET Date and Time ‹ Date and Time Setup Using Genlink‹ Date and Time Setup Using Front Panel Adjust Display Contrast ‹ HTS Setup Using Genlink ‹ HTS Setup Using Front PanelGeneral Information NEW Generation Genlink NGG Communications Remote Annunciator Connection OptionAppendix a Analog Functions ThermistorPressure POLY3RD Linear POLY1STPOLY1STN2 Current CalscaleAppendix B H-100 General I/O and Connector Information ‹ H-100 Analog Inputs‹ H-100 Digital Outputs ‹ H-100 Digital Inputs‹ H-100 Digital Output Functions Analog 6 Fault Fuel PRS FaultInlt TMP Fault GOV POS HI AlarmTOT PWR HI Alarm TOT PWR LO AlarmGEN Freq Fault ENG RPM HI AlarmFault RLY Active USR ConfigChck V PHS ROT Chck C PHS ROT‹ H-100 Connector PIN Descriptions Wire Signal DescriptionAppendix C Miscellaneous H-100 Internal ALARMS/WARNINGS Control Panel Technical Manual Control Panel Technical Manual Generac Power SYSTEMS, INC

H-100 specifications

Generac Power Systems H-100 is an innovative and robust product that has garnered attention for its reliability and performance in power generation. This generator is primarily designed for both residential and commercial applications, providing a seamless backup power solution during outages.

One of the standout features of the H-100 is its powerful engine. Equipped with a state-of-the-art gas engine, this generator can deliver up to 100 kW of power, ensuring that homes, businesses, and critical facilities remain operational even in the most challenging conditions. The engine is engineered for efficiency and longevity, reducing maintenance needs and minimizing fuel consumption.

Another significant aspect of the H-100 is its advanced Smart Management System. This technology ensures optimal power usage by intelligently distributing the electrical load among connected devices. By prioritizing essential circuits, the generator maximizes efficiency and prolongs operational time during power outages.

The H-100 also boasts a remarkable noise reduction feature. Its innovative design includes sound attenuation measures, allowing the generator to operate quietly, which is particularly beneficial in residential areas where noise pollution can be a concern. This focus on quieter operation enhances user comfort and complies with noise regulations.

Durability is a key characteristic of the Generac H-100. Constructed with high-quality materials, it is designed to withstand harsh weather conditions and heavy usage. This generator is built for longevity, providing users with reliable performance and peace of mind.

The H-100 is also equipped with a user-friendly control panel. This intuitive interface allows users to monitor the generator's performance, manage settings, and perform necessary maintenance checks easily. The integration of remote monitoring capabilities enables users to assess the generator's status from anywhere, adding an extra layer of convenience.

Lastly, Generac Power Systems offers comprehensive support and resources for H-100 users. Their commitment to customer service includes accessible informational materials, a reliable warranty program, and a national network of service professionals. This ensures that users receive the assistance they need to maintain their generators optimally.

In summary, the Generac Power Systems H-100 stands out as a reliable, efficient, and user-friendly power generation solution. With its robust engine, smart management system, noise reduction features, and durable construction, it is well-suited to meet the demands of both residential and commercial applications.
Top Page Image Contents