Generac Power Systems H-100 technical manual Service

Page 19

General Information

H-100 Control Panel Technical Manual

“Warmed Up, Alarms On”

SERVICE

Generator is started, warmed up, and the hold-off alarms are enabled.

“Running,cooling down”

Generator is still running, but waiting for cool down timer to expire.

“Stopping”

Generator is running down after being turned off normally.

“Stopping due to Alrm”

Generator is running down after being turned off due to a shutdown alarm.

“Stopped due to Alarm”

Generator is stopped due to a shutdown alarm.

LINE 3: System Time and Date. It is able to be changed on this page by using the arrow buttons to go from field to field or to modify a field in edit mode and the “ENTER” button to enter and exit edit mode. There are five editable fields: Hours, Minutes, Month, Day, and Year. The day of the week will change as the displayed date is changed. See the “SET DATE AND TIME” section of this manual for details.

LINE 4: “More” field to allow page selection.

Press the “ENTER” button.

There are four Maintenance Status pages. The first three pages show the status of the scheduled mainte- nance items. The fourth page allows changing of the display contrast.

Do the following to view the service pages:

Press the “MENU” button.

Press the button three times or the button once.

Press the “ENTER” button.

This is a typical second System Status page.

LINE 1: Firmware and Hardware release versions.

LINE 2: Configuration File identifier – serial num- ber, model number, or text.

LINE 3: ILC program name. This text string is blank or blocks (as shown above) when there is no ILC program loaded.

LINE 4: ILC program running status followed by the “More” field to allow page selection.

This is a typical first Maintenance Status page. Each line displays a maintenance item that has been set up via GenLink. The value displayed is the approxi- mate % of life remaining before maintenance should be performed. Refer to the Maintenance setup using GenLink.

Press the “ENTER” button.

This is a typical second Maintenance Status page.

17

Image 19
Contents Control Panel Technical Manual  General Hazards  Inside Front Cover Authorized Service Dealer Location‹ Customization FeaturesPanel Setup IntroductionThen Measurement Engine‹ Analog Channels ‹ Analog Maths‹ Analog Alarms ‹ Analog Sensor Ratings Output Functions‹ Other Analog Options ‹ Spare Analog ChannelsParameter Units ‹ Engine SettingsEngine Management ‹ Generator ParametersCLOSED? Starting and Stopping Sequence DiagramsVoltage Regulator Option Voltage Regulator Option ChartGovernor Speed Regulator Option Trending Governor Speed Regulator Option Chart‹ Remote Trending ILC ‹ Genlink Local Trending Setup‹ Local Trending ‹ Right Display Front Panel Display‹ Left Display Pages ‹ Left DisplayVolts SwitchAlrm Log Other Power‹ Alarms Graph HzEngine General Information Status Service Generator Diagnostics General Information EXERCISE/HTS TDN Event LOG Alarm LOGHome Control PanelAIR/FUEL Ratio Control Option Maintenance SettingsI2T Current Monitoring Option Internal Exercise Function Quiettest Setup Using GenlinkNormal Exercise Setup Using Genlink Quiettest Setup Using Front Panel General Information General Information Normal Exercise Setup Using Front Panel General Information General Information ‹ Date and Time Setup Using Front Panel ‹ Date and Time Setup Using GenlinkSET Date and Time Adjust Display Contrast ‹ HTS Setup Using Front Panel ‹ HTS Setup Using GenlinkGeneral Information Remote Annunciator Connection Option NEW Generation Genlink NGG CommunicationsLinear POLY1ST Appendix a Analog FunctionsThermistor Pressure POLY3RDCurrent Calscale POLY1STN2‹ H-100 Analog Inputs Appendix B H-100 General I/O and Connector Information‹ H-100 Digital Inputs ‹ H-100 Digital Outputs‹ H-100 Digital Output Functions GOV POS HI Alarm Analog 6 FaultFuel PRS Fault Inlt TMP FaultENG RPM HI Alarm TOT PWR HI AlarmTOT PWR LO Alarm GEN Freq FaultChck C PHS ROT Fault RLY ActiveUSR Config Chck V PHS ROTWire Signal Description ‹ H-100 Connector PIN DescriptionsAppendix C Miscellaneous H-100 Internal ALARMS/WARNINGS Control Panel Technical Manual Control Panel Technical Manual Generac Power SYSTEMS, INC

H-100 specifications

Generac Power Systems H-100 is an innovative and robust product that has garnered attention for its reliability and performance in power generation. This generator is primarily designed for both residential and commercial applications, providing a seamless backup power solution during outages.

One of the standout features of the H-100 is its powerful engine. Equipped with a state-of-the-art gas engine, this generator can deliver up to 100 kW of power, ensuring that homes, businesses, and critical facilities remain operational even in the most challenging conditions. The engine is engineered for efficiency and longevity, reducing maintenance needs and minimizing fuel consumption.

Another significant aspect of the H-100 is its advanced Smart Management System. This technology ensures optimal power usage by intelligently distributing the electrical load among connected devices. By prioritizing essential circuits, the generator maximizes efficiency and prolongs operational time during power outages.

The H-100 also boasts a remarkable noise reduction feature. Its innovative design includes sound attenuation measures, allowing the generator to operate quietly, which is particularly beneficial in residential areas where noise pollution can be a concern. This focus on quieter operation enhances user comfort and complies with noise regulations.

Durability is a key characteristic of the Generac H-100. Constructed with high-quality materials, it is designed to withstand harsh weather conditions and heavy usage. This generator is built for longevity, providing users with reliable performance and peace of mind.

The H-100 is also equipped with a user-friendly control panel. This intuitive interface allows users to monitor the generator's performance, manage settings, and perform necessary maintenance checks easily. The integration of remote monitoring capabilities enables users to assess the generator's status from anywhere, adding an extra layer of convenience.

Lastly, Generac Power Systems offers comprehensive support and resources for H-100 users. Their commitment to customer service includes accessible informational materials, a reliable warranty program, and a national network of service professionals. This ensures that users receive the assistance they need to maintain their generators optimally.

In summary, the Generac Power Systems H-100 stands out as a reliable, efficient, and user-friendly power generation solution. With its robust engine, smart management system, noise reduction features, and durable construction, it is well-suited to meet the demands of both residential and commercial applications.