Integra RDV-1.1 Initial Setup, Press the Enter button, use, Use the Left and Right

Initial Setup—Continued

5 Press the [Enter] button, use the

Up and Down [ ]/[ ] buttons to Remote controller select On or Off, and then press

the [Enter] button.

Enter

Choose Off if your multichannel amp has its own speaker setup function.

Choose On if your multichannel amp has no speaker setup function.

If you select Off, the following settings cannot be set and the Initial Setup menu closes. If you select On, the Speaker Setting menu appears.

Here you can specify the size of the speakers being fed from the FRONT, SURR 1/SURR 2, CENTER, and SUBWOOFER AUDIO OUTPUTs.

For speakers with a cone diameter larger than 6-1/2 inches (16 cm), spec- ify Large. For those with a smaller diameter, specify Small. See page 78 for more information.

6 Press the [Enter] button, use the

Left and Right [ ]/[ ] buttons to Remote controller set the Subwoofer setting, and

8 Use the Left and Right []/[ ] buttons to set the Center Speaker

Remote controller setting, and then press the [Enter] button.

Large: Select if the center speaker is

Enter

large.

Small (default): Select if the center speaker is small.

Off: Select if no center speaker is being used.

Note that if the Front Speaker Size is set to Small, the Large option cannot be selected.

9	Use the Left and Right [ ]/[ ]
	buttons to set the Surround

Remote controller Speaker setting, and then press

the [Enter] button.

Large: Select if the surround speakers

Enter

are large.

Small (default): Select if the surround speakers are small.

Off: Select if no surround speakers are being used.

The Initial Setup menu closes and the setup is complete.

The RDV-1.1 is now ready for use. See page 46 for information on playing discs.

Notes:

• You can change the language of the onscreen setup

menus, and specify your preferred languages for DVD

menus, soundtracks, and subtitles on the Language

Enter

then press [Enter] again.

Off: Select if no subwoofer is being used.

On (default): Select if a subwoofer is being used.

menu (see page 82).

• When a DVD doesn’t have menus, soundtracks, and

subtitles in different languages, its default language is

used.

• When the RDV-1.1 is plugged in and set to Standby, it

automatically checks if it’s connected to any other

7

Remote controller

Enter

Use the Left and Right []/[ ] buttons to set the Front Speaker setting, and then press the [Enter] button.

Large: Select if the front speakers are large.

Small (default): Select if the front speakers are small.

Note that if the Subwoofer setting is set to Off, this setting is fixed at Large.

i.LINK components. If it is, the default setting for the

i.LINK Output Setting becomes On. If not, the default

becomes Off.

45