Wayne-Dalton 8800 installation instructions Side Lock, Pull Rope

Page 24

�

Side Lock

 

 

 

Tools Needed:

Install the side lock on the second section of

the door. Secure the lock to the section with

 

Power Drill

(4) 1/4”- 20 x 11/16” self drilling screws.

Square the lock assembly with the door section

 

7/16” Socket

and align with the square hole in the vertical

Driver

track. The side lock should be spaced in

approximately 1/8” from the section edge.

 

Tape Measure

IMPORTANT: side locks must be

 

 

removed or made inoperative in the

 

unlocked position if an operator is

 

installed on the door.

 

NOTE: After completing this step, continue with

 

step 12 on page 14.

 

 

1/8”

(4)1/4”- 20 x 11/16” self drilling screws

1/8”

�

Pull Rope

 

Tools Needed:

WARNING

 

Power Drill

DO NOT INSTALL PULL ROPES

 

ON DOORS WITH ELECTRIC

1/8” Drill Bit

OPERATORS. CHILDREN MAY

 

BECOME ENTANGLED IN THE

 

ROPE CAUSING SEVERE OR FATAL

 

INJURY.

 

Measure and mark the jamb approximately

 

48” to 50” (1220 to 1270 mm) from floor on

 

the right or left side of door. Drill 1/8” pilot

 

hole for No. 6 screw eye. Install the No. 6

 

screw eye. Tie the pull rope to the No. 6 screw

 

eye and to the bottom bracket as shown.

NO. 6 SCREW EYE

PULL ROPE

PULL ROPE

BOTTOM BRACKET

24

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Portland Source Plant Wayne-Dalton CorpTable of Contents Package Contents Door Section Identification P1 Removing An Old Door Tools RequiredPreparing the Opening Failure to securely attach a suitableMounting pad to structurally sound Resulting in severe or fatal injuryInstallation Sideroom requirementsCutting Vertical Track Important Doors that are 7’-0Or 8’-0 in height do not require Cutting the vertical trackTrack and Installing Wall Angle Installing Fully Adjustable JambBrackets To Bottom Brackets Bottom BracketsImportant Right and left hand is Always determined from insideImportant When Placing Rollers HingesTop Bracket Lift HandleLift handle outside Lift handle insideBottom Section Vertical Track and Wall AngleStacking Sections Tools NeededScrews Top Section Repeat for opposite sideRoller Nail Top section 4 from top 11/16 to Edge of top sectionAdjusting Top Brackets Important Failure to remove nailBefore attempting to raise door Could cause permanent damage toCenter Bearing Bracket Important Right and left handIs always determined from inside Torsion Spring Assembly SpacingRequired, contact Wayne-Dalton Corp. for free replacements Nylon Center BushingCounterbalance Cables Securing DoorFor Spring Winding Winding Torsion Springs Rear Support Keep horizontal trackParallel and within 3/4 Maximum of door edge Otherwise door could fall Resulting in severe injury orHorizontal Track Angle BracePerforated Angle Side Lock Pull RopeTrolley Operator Cleaning Cleaning Your Garage DoorFollowing cleaning solution is recommended Limited Warranty Model Thank you for your purchase

8800 specifications

The Wayne-Dalton 8800 is a premium insulated steel garage door designed for both residential and commercial applications. Renowned for its superior durability and energy efficiency, this model stands out as an ideal choice for homeowners and businesses looking to enhance their property’s aesthetic and functional characteristics.

One of the primary features of the Wayne-Dalton 8800 door is its construction. The door is constructed with a robust steel frame filled with high-density polystyrene insulation. This insulation provides a remarkable thermal performance, helping to reduce energy costs and maintain comfortable temperatures throughout the year. With an R-value of up to 14.5, the 8800 door ensures that indoor environments remain stable, minimizing the heat loss or gain typical of garage spaces.

In terms of design, the 8800 model is available in various styles and colors, allowing homeowners to customize their doors to match their personal taste and architectural preferences. This door is typically offered in a smooth finish or with a wood-grain texture, providing options for both modern and classic aesthetics. Additionally, the door features steel construction with a sophisticated exterior, ensuring it withstands the test of time while looking great.

Safety is paramount in the Wayne-Dalton 8800 design. Equipped with safety features such as pinch-resistant finger protection, the door helps prevent injuries, making it a family-friendly choice. Its advanced torsion spring system, which is designed for longevity, further enhances safety, ensuring smooth operation and reducing the risk of accidents.

Additionally, the Wayne-Dalton 8800 incorporates innovative technology to improve convenience and usability. The door can be fitted with various automatic opening mechanisms, including Wi-Fi-enabled garage door openers that allow for remote access via smartphones. This technology not only adds an element of convenience but also enhances security, allowing homeowners to monitor access and control their garage door from anywhere.

Overall, the Wayne-Dalton 8800 combines practical features, advanced technology, and customizable design, making it an excellent choice for those seeking a reliable and stylish garage door solution. With its focus on energy efficiency, safety, and overall functionality, it remains a leading option in the market for both residential and commercial use.
Top Page Image Contents