Wayne-Dalton 8800 installation instructions Package Contents

Page 3

Package Contents

NOTE: Depending on the door model, some parts listed will not be supplied if not necessary. rear supports may or may not be included with your door.

(2) Horizontal Track with attached horizontal angle RH/LH

(1) Torsion TUBE

door sections

(as required)

right and left

#6 screw eye and

bottom brackets

pull rope

(As required)

(as required)

 

(2) Fully Adjustable

TOP BRACKET

jamb brackets

Rollers

RH/LH Flagangle

Assembly

(as required)

(as required)

 

(As Required)

 

 

LIFT HANDLEs (as required)

Right & left

#1, #2, #3, #4 hinges

counterbalance cables

& #1 Half hinges

End bearing Brackets

 

(as required)

 

 

 

8800 & 8850 Aluminum Full View

Torsion Spring

Installation Instructions and Owner’s Manual

Portland Source Plant

IMPORTANT NOTICE!

Read these instructions carefully before attempting installation. If in question about any of the procedures, do not perform the work. Instead, have a qualified door agency do the installation or repairs.

 

 

 

Part No. xxxxxx

Right & left Drums

(1) Center Bracket

(1) Center Bracket

mANUAL

 

 

Bushing

 

(2)WALL ANGLES

(2) Vertical

RH/LH Track

weather seal &

nails (if included)

RH/LH Torsion

springs (as required)

3

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Wayne-Dalton Corp Portland Source PlantTable of Contents Package Contents Door Section Identification Tools Required P1 Removing An Old DoorResulting in severe or fatal injury Preparing the OpeningFailure to securely attach a suitable Mounting pad to structurally soundSideroom requirements InstallationCutting the vertical track Cutting Vertical TrackImportant Doors that are 7’-0 Or 8’-0 in height do not requireTrack and Installing Wall Angle Installing Fully Adjustable JambBrackets Always determined from inside To Bottom BracketsBottom Brackets Important Right and left hand isHinges Important When Placing RollersLift handle inside Top BracketLift Handle Lift handle outsideVertical Track and Wall Angle Bottom SectionStacking Sections Tools NeededScrews Top section 4 from top 11/16 to Edge of top section Top SectionRepeat for opposite side Roller NailCould cause permanent damage to Adjusting Top BracketsImportant Failure to remove nail Before attempting to raise doorCenter Bearing Bracket Important Right and left handIs always determined from inside Spacing Torsion Spring AssemblyNylon Center Bushing Required, contact Wayne-Dalton Corp. for free replacementsCounterbalance Cables Securing DoorFor Spring Winding Winding Torsion Springs Otherwise door could fall Resulting in severe injury or Rear SupportKeep horizontal track Parallel and within 3/4 Maximum of door edgeHorizontal Track Angle BracePerforated Angle Pull Rope Side LockTrolley Operator Cleaning Cleaning Your Garage DoorFollowing cleaning solution is recommended Limited Warranty Model Thank you for your purchase

8800 specifications

The Wayne-Dalton 8800 is a premium insulated steel garage door designed for both residential and commercial applications. Renowned for its superior durability and energy efficiency, this model stands out as an ideal choice for homeowners and businesses looking to enhance their property’s aesthetic and functional characteristics.

One of the primary features of the Wayne-Dalton 8800 door is its construction. The door is constructed with a robust steel frame filled with high-density polystyrene insulation. This insulation provides a remarkable thermal performance, helping to reduce energy costs and maintain comfortable temperatures throughout the year. With an R-value of up to 14.5, the 8800 door ensures that indoor environments remain stable, minimizing the heat loss or gain typical of garage spaces.

In terms of design, the 8800 model is available in various styles and colors, allowing homeowners to customize their doors to match their personal taste and architectural preferences. This door is typically offered in a smooth finish or with a wood-grain texture, providing options for both modern and classic aesthetics. Additionally, the door features steel construction with a sophisticated exterior, ensuring it withstands the test of time while looking great.

Safety is paramount in the Wayne-Dalton 8800 design. Equipped with safety features such as pinch-resistant finger protection, the door helps prevent injuries, making it a family-friendly choice. Its advanced torsion spring system, which is designed for longevity, further enhances safety, ensuring smooth operation and reducing the risk of accidents.

Additionally, the Wayne-Dalton 8800 incorporates innovative technology to improve convenience and usability. The door can be fitted with various automatic opening mechanisms, including Wi-Fi-enabled garage door openers that allow for remote access via smartphones. This technology not only adds an element of convenience but also enhances security, allowing homeowners to monitor access and control their garage door from anywhere.

Overall, the Wayne-Dalton 8800 combines practical features, advanced technology, and customizable design, making it an excellent choice for those seeking a reliable and stylish garage door solution. With its focus on energy efficiency, safety, and overall functionality, it remains a leading option in the market for both residential and commercial use.
Top Page Image Contents