Wayne-Dalton 8800 installation instructions Trolley Operator

Page 25

�

Trolley Operator

 

Tools Needed:

WARNING

Tape Measure

OPERATOR MUST BE TESTED

Step Ladder

AT TIME OF INSTALLATION AND

MONTHLY THEREAFTER TO

 

 

ENSURE THAT DOOR REVERSES

 

ON CONTACT WITH 2 X 4 BOARD

 

LAID FLAT UNDER THE DOOR.

 

FAILURE TO ADJUST OPERATOR,

 

IF NECESSARY, CAN RESULT IN

 

SEVERE OR FATAL INJURY. IF YOUR

 

OPERATOR IS EQUIPPED WITH A

 

PHOTOELECTRIC EYE SYSTEM,

 

THEN THIS MUST BE TESTED

 

AT THE SAME TIME TO ENSURE

 

THAT DOOR DOES NOT CLOSE

 

AND A CLOSING DOOR OPENS IF

 

PHOTOELECTRIC EYE SYSTEM IS

 

OBSTRUCTED. FAILURE TO MAKE

 

ADJUSTMENTS, IF NECESSARY,

 

CAN RESULT IN SEVERE OR FATAL

 

INJURY.

1.Install operator rail 1/2” to 1-1/2” (13 - 38 mm) above high arc of top section of the door.

2.Mount operator to ceiling so that 1” to 1-1/2” (25 - 38 mm) clearance is maintained between trolley rail and top section when door is fully open (trolley rail will slope down towards rear).

3.Attach door arm to operator bracket

4.Attach operator rail to suitable mounting surface, 2 x 6 lumber minimum.

5.Attach operator to ceiling using perforated angle.

IMPORTANT: Angles must be securely attached to sound framing member(s).

OPERATOR RAIL

HEADER

perforated

OPERATORangle rail

OPERATOR

FRAMING MEMBERS

PERFORATED ANGLE

optional INSTALLATION

25

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Wayne-Dalton Corp Portland Source PlantTable of Contents Package Contents Door Section Identification Tools Required P1 Removing An Old DoorFailure to securely attach a suitable Preparing the OpeningMounting pad to structurally sound Resulting in severe or fatal injurySideroom requirements InstallationImportant Doors that are 7’-0 Cutting Vertical TrackOr 8’-0 in height do not require Cutting the vertical trackInstalling Fully Adjustable Jamb Track and Installing Wall AngleBrackets Bottom Brackets To Bottom BracketsImportant Right and left hand is Always determined from insideHinges Important When Placing RollersLift Handle Top BracketLift handle outside Lift handle insideVertical Track and Wall Angle Bottom SectionTools Needed Stacking SectionsScrews Repeat for opposite side Top SectionRoller Nail Top section 4 from top 11/16 to Edge of top sectionImportant Failure to remove nail Adjusting Top BracketsBefore attempting to raise door Could cause permanent damage toImportant Right and left hand Center Bearing BracketIs always determined from inside Spacing Torsion Spring AssemblyNylon Center Bushing Required, contact Wayne-Dalton Corp. for free replacementsSecuring Door Counterbalance CablesFor Spring Winding Winding Torsion Springs Keep horizontal track Rear SupportParallel and within 3/4 Maximum of door edge Otherwise door could fall Resulting in severe injury orAngle Brace Horizontal TrackPerforated Angle Pull Rope Side LockTrolley Operator Cleaning Your Garage Door CleaningFollowing cleaning solution is recommended Limited Warranty Model Thank you for your purchase

8800 specifications

The Wayne-Dalton 8800 is a premium insulated steel garage door designed for both residential and commercial applications. Renowned for its superior durability and energy efficiency, this model stands out as an ideal choice for homeowners and businesses looking to enhance their property’s aesthetic and functional characteristics.

One of the primary features of the Wayne-Dalton 8800 door is its construction. The door is constructed with a robust steel frame filled with high-density polystyrene insulation. This insulation provides a remarkable thermal performance, helping to reduce energy costs and maintain comfortable temperatures throughout the year. With an R-value of up to 14.5, the 8800 door ensures that indoor environments remain stable, minimizing the heat loss or gain typical of garage spaces.

In terms of design, the 8800 model is available in various styles and colors, allowing homeowners to customize their doors to match their personal taste and architectural preferences. This door is typically offered in a smooth finish or with a wood-grain texture, providing options for both modern and classic aesthetics. Additionally, the door features steel construction with a sophisticated exterior, ensuring it withstands the test of time while looking great.

Safety is paramount in the Wayne-Dalton 8800 design. Equipped with safety features such as pinch-resistant finger protection, the door helps prevent injuries, making it a family-friendly choice. Its advanced torsion spring system, which is designed for longevity, further enhances safety, ensuring smooth operation and reducing the risk of accidents.

Additionally, the Wayne-Dalton 8800 incorporates innovative technology to improve convenience and usability. The door can be fitted with various automatic opening mechanisms, including Wi-Fi-enabled garage door openers that allow for remote access via smartphones. This technology not only adds an element of convenience but also enhances security, allowing homeowners to monitor access and control their garage door from anywhere.

Overall, the Wayne-Dalton 8800 combines practical features, advanced technology, and customizable design, making it an excellent choice for those seeking a reliable and stylish garage door solution. With its focus on energy efficiency, safety, and overall functionality, it remains a leading option in the market for both residential and commercial use.
Top Page Image Contents