Wayne-Dalton 8800 installation instructions P1 Removing An Old Door, Tools Required

Page 5

 

Tools Required

 

 

 

 

 

power drill

pencil

ratchet Wrench

vice grips

 

3/8”, 7/16” socket

gloves

 

 

 

 

 

driver

 

Phillips Head

7/16”, 1/2” &

9/32”, 1/2”, 3/16” & 1/8”

Safety Glasses

1/4”, 3/8”, 7/16”, 1/2” &

hammer

Screwdriver

9/16” Socket

drill bits

 

 

9/16” Wrenches

 

 

Needle Nose

level

Tape Measure

 

vice clamps

 

 

Pliers

 

 

 

 

 

sawhorse

Flat Tip Screwdriver

1/4” torx bit

Approved Winding Bars

 

 

Step Ladder

 

 

 

 

 

 

P1 Removing An Old Door

Counterbalance spring tension must always be released before any attempt is made to start removing an existing door.

WARNING

A POWERFUL SPRING RELEASING ITS ENERGY SUDDENLY CAN CAUSE SEVERE OR FATAL INJURY. TO AVOID INJURY HAVE A TRAINED DOOR SYSTEMS TECHNICIAN, USING PROPER TOOLS AND INSTRUCTIONS, RELEASE THE SPRING TENSION.

For detailed information see supplemental instructions “removing an existing door/preparing the opening”. These instructions are available at no charge from Wayne-Dalton Corp., P.O. Box 67, Mt. Hope, OH 44660, or at www.wayne-dalton.com.

PRE-INSTALLATION

5

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Wayne-Dalton Corp Portland Source PlantTable of Contents Package Contents Door Section Identification Tools Required P1 Removing An Old DoorFailure to securely attach a suitable Preparing the OpeningMounting pad to structurally sound Resulting in severe or fatal injurySideroom requirements InstallationImportant Doors that are 7’-0 Cutting Vertical TrackOr 8’-0 in height do not require Cutting the vertical trackBrackets Track and Installing Wall AngleInstalling Fully Adjustable Jamb Bottom Brackets To Bottom BracketsImportant Right and left hand is Always determined from insideHinges Important When Placing RollersLift Handle Top BracketLift handle outside Lift handle insideVertical Track and Wall Angle Bottom SectionScrews Stacking SectionsTools Needed Repeat for opposite side Top SectionRoller Nail Top section 4 from top 11/16 to Edge of top sectionImportant Failure to remove nail Adjusting Top BracketsBefore attempting to raise door Could cause permanent damage toIs always determined from inside Center Bearing BracketImportant Right and left hand Spacing Torsion Spring AssemblyNylon Center Bushing Required, contact Wayne-Dalton Corp. for free replacementsFor Spring Winding Counterbalance CablesSecuring Door Winding Torsion Springs Keep horizontal track Rear SupportParallel and within 3/4 Maximum of door edge Otherwise door could fall Resulting in severe injury orPerforated Angle Horizontal TrackAngle Brace Pull Rope Side LockTrolley Operator Following cleaning solution is recommended CleaningCleaning Your Garage Door Limited Warranty Model Thank you for your purchase

8800 specifications

The Wayne-Dalton 8800 is a premium insulated steel garage door designed for both residential and commercial applications. Renowned for its superior durability and energy efficiency, this model stands out as an ideal choice for homeowners and businesses looking to enhance their property’s aesthetic and functional characteristics.

One of the primary features of the Wayne-Dalton 8800 door is its construction. The door is constructed with a robust steel frame filled with high-density polystyrene insulation. This insulation provides a remarkable thermal performance, helping to reduce energy costs and maintain comfortable temperatures throughout the year. With an R-value of up to 14.5, the 8800 door ensures that indoor environments remain stable, minimizing the heat loss or gain typical of garage spaces.

In terms of design, the 8800 model is available in various styles and colors, allowing homeowners to customize their doors to match their personal taste and architectural preferences. This door is typically offered in a smooth finish or with a wood-grain texture, providing options for both modern and classic aesthetics. Additionally, the door features steel construction with a sophisticated exterior, ensuring it withstands the test of time while looking great.

Safety is paramount in the Wayne-Dalton 8800 design. Equipped with safety features such as pinch-resistant finger protection, the door helps prevent injuries, making it a family-friendly choice. Its advanced torsion spring system, which is designed for longevity, further enhances safety, ensuring smooth operation and reducing the risk of accidents.

Additionally, the Wayne-Dalton 8800 incorporates innovative technology to improve convenience and usability. The door can be fitted with various automatic opening mechanisms, including Wi-Fi-enabled garage door openers that allow for remote access via smartphones. This technology not only adds an element of convenience but also enhances security, allowing homeowners to monitor access and control their garage door from anywhere.

Overall, the Wayne-Dalton 8800 combines practical features, advanced technology, and customizable design, making it an excellent choice for those seeking a reliable and stylish garage door solution. With its focus on energy efficiency, safety, and overall functionality, it remains a leading option in the market for both residential and commercial use.
Top Page Image Contents