O2 Innovations pmn manual Target Specifications, Element Specification

TARGET Series		ENMET Corporation
Replacement Sensors:
	ENMET Part No.	Description
	03008-131	Sensor, BRH
		for units with s/n 15-2499and below
	03008-012	Sensor, BRH012
		for units with s/n 15-2500and above
	03015-012	Sensor, HS+/CO+
	03070-002	Sensor, Combustible (HW)
	67016-1104	Sensor, Oxygen
		for units with s/n 15-1999and below that have not been modified
	67016-1114	Sensor, Oxygen (extended life)
		for units with s/n 15-2000and above
	67025-0100	Sensor, Chlorine
	67025-0200	Sensor, Hydrogen sulfide
	67025-0300	Sensor, Hydrogen cyanide
	67025-0400	Sensor, Hydrogen chloride
	67025-0500	Sensor, Sulfur dioxide
	67025-0800	Sensor, Ozone
	67025-0850	Sensor, Chlorine dioxide
	67025-1200	Sensor, Carbon monoxide
	67025-1202	Sensor, Carbon monoxide / Hydrogen sulfide
	67025-1500	Sensor, Hydrogen
	67025-1700	Sensor, Nitrogen dioxide
	67025-1750	Sensor, Nitric oxide
	67025-2400	Sensor, Ammonia
	67025-4000	Sensor, Arsine
	67025-5200	Sensor, Ethylene oxide

7.2 Target Specifications

Element

Specification

Dimensions	6 x 4.5 x 1.7 inches (150 x 115 x 45 mm)
Weight	32 ounces (900 grams)
Operating Temperature	5 F° to 122 F° (-15 C° to 50 C °)
Storage Temperature	122 F° to 140 F° (-30 C° to 60 C °)
Operating Humidity	5 – 99% (non-condensing)
Enclosure Material	Aluminum Extrusion and Castings
Approval Rating	Approved instruments are identified by the presence of the CSA logo on the
	instrument serial number label.
	CSA approval for Intrinsic Safety, Class 1, Div 1, Groups A,B,C,D
Power Source	Battery Pack: Nickel-Metal Hydride

NOTE: Any specifications stated in this manual may change without notice.

23