6.5 | Replacing Battery Pack | 20 |
6.6 | Replacing Internal Pump | 20 |
6.7 | Replacing Sensors | 21 |
7.0 Instrument Information | 22 | |
7.1 | Replacement Parts List | 22 |
7.2 | Target Specifications | 23 |
8.0 Default Alarm and Configurations | 24 | |
9.0 Flow Diagrams | 25 | |
9.1 | Basic Operation Menu | 25 |
9.2 | Standard Maintenance Menu | 26 |
9.3 Advanced Operation Menu | 27 | |
9.4 | Advanced Maintenance Menu, Software 4.94 version | 28 |
9.4 | Advanced Maintenance Menu, Software 6.0 version | 29 |
10.0 Troubleshooting | 30 | |
11.0 WARRANTY | 31 | |
List of Figures and Tables |
|
FIGURE 1: FRONT VIEW | 3 |
FIGURE 2: SENSOR VIEW | 3 |
FIGURE 3: TOP VIEW | 3 |
FIGURE 4: BOTTOM VIEW | 3 |
FIGURE 5: MAIN GAS DISPLAY | 3 |
FIGURE 6: INSERT CHARGE JACK | 5 |
FIGURE 7: REMOVE CHARGE JACK | 5 |
TABLE 1: BATTERY LIFE | 6 |
TABLE 2: PROGRAMMED FLAMMABLE GAS COEFFICIENTS | 8 |
FIGURE 8A: CALIBRATION SHIELD ATTACHMENT | 13 |
FIGURE 8: VARIOUS CALIBRATION ADAPTER ATTACHMENTS | 14 |
FIGURE 9: REPLACING BATTERY PACK AND INTERNAL PUMP | 20 |
FIGURE 9A: REPLACING INTERNAL PUMP FOR INSTRUMENTS WITH S/N 0699 AND BELOW | 20 |
FIGURE 10: REMOVE SHORTING CLIP | 21 |
FIGURE 11: REPLACING SENSORS | 21 |
TABLE 3: DEFAULT ALARM | 24 |
TABLE 4: DEFAULT CONFIGURATION | 24 |
TABLE 5: TARGET MENU QUICK REFERENCE | 25 |
Reference Information:
NOTE: [important information about use of the instrument.]
CAUTION: [affects equipment – if not followed may cause dam age to instrument, sensor etc…]
WARNING: [affects personnel safety – if not followed may cau se bodily injury or death.]