Instrument Information | O2 Innovations pmn manual

Replacement Parts:

ENMET Part No.

04835-000	Sampling hose

04835-001	Sampling wand

04835-002	Hand aspirator, requires 04835-000 or 04835-001 or both

04833-000	Protective carrying case
04833-003	Alkaline battery holder
66014-003	Charger cable, 12 VDC

73083-007	Economy Black Transit Case with Lining

04832-000	Battery Charger, 100-240 VAC, req. cable 66018-000 or equiv.
66018-000	Power cable for charger, 110 VAC plug
67019-024	Battery Pack, NiMH

04833-002	Internal Pump, is round pump w/crimps & connector
	for units with s/n 15-0699and below
04833-004	Internal Pump, is square pump w/crimps & connector
	for units with s/n 15-0700and above
03620-017	Calibration/hand aspirator cover

04833-001	Computer Cable

04836-000	Sampling cover for internal sample pump

73089-068	Sampling filter

04833-005	Trakker software
80012-014	TARGET Series Operation and Maintenance Manual

Calibration Gas and accessories:

ENMET Part No.

Description

03388-000	Calibration Gas, 34 liter, 50% LEL CH4, 20ppm H2S, 100 ppm CO, 20.9% O2
03286-100	Calibration Gas, 17 liter, 100ppm Toluene for BRH Sensor

03227-800	Calibration Gas, 17 liter, 800ppm Hydrogen, H2
03220-050	Calibration Gas, 17 liter, 50% LEL Methane, CH4
03219-100	Calibration Gas, 17 liter, 100ppm Carbon monoxide, CO

Δ03302-010	Calibration Gas, 34 liter, 10ppm Hydrogen chloride, HCL
03303-010	Calibration Gas, 34 liter, 10ppm Hydrogen cyanide, HCN

03314-020	Calibration Gas, 34 liter, 20ppm Hydrogen sulfide, H2S
03315-010	Calibration Gas, 17 liter, 10ppm Sulfur dioxide, SO2
03318-025	Calibration Gas, 17 liter, 25ppm Ammonia, NH3
Δ03331-005	Calibration Gas, 17 liter, 5ppm Chlorine, Cl2
Δ03332-005	Calibration Gas, 34 liter, 5ppm Ethylene oxide, ETO
03334-025	Calibration Gas, 34 liter, 25ppm Nitric oxide, NO

04834-001	Calibration Adapter, Reactive Gases

04834-005	Calibration Adapter, for BRH sensor
03620-017	Calibration Shield

*03510-002	Calibration Adapter, Flow Demand

*Required in use with Δcalibration gases.

ΔThese gases require the Sampling Shield p/n 04836-000 to be in place and pump activated for accurate detection and calibration.