Bacharach INSIGHT manual Powering OFF the Analyzer & Purging, Low Battery Alarm, Memory

Page 17

Fyrite® INSIGHT

4.11 Powering OFF the Analyzer & Purging

Power OFF the analyzer by pressing the PWR button for at least 2 seconds, or until two beeps are heard. The unit will count down 5 seconds before shutting down, giving the operator an opportunity to keep the analyzer powered ON by pressing the RUN/HOLD button.

If the analyzer was not purged with fresh air then the analyzer may remain ON with its pump running and display the message "PURGING SENSORS" as the result of combustion gases still being present inside the analyzer. At this time the operator should ensure that the probe is removed from the stack, allowing the analyzer to purge itself with fresh air. The 5-second-shutdown sequence will not begin until the gas levels inside the analyzer drop below predeterminded levels.

TIP: Although not recommended, the purging process can be bypassed by pressing the PWR button a second time.

4.12 Low Battery Alarm

When the batteries are nearly depleted, an empty battery icon appears in the upper-right corner of the display, and a short beep is sounded every 10 seconds.

After a low battery alarm occurs, the analyzer will continue to operate for only a few minutes. The amount of operating time that remains depends on many factors (e.g. pump and backlight being ON or OFF and the type and condition of the batteries).

4.13 Memory

All saved data can be retrieved for viewing through the MEMORY option.

To open and view saved test data:

1.Display the MAIN MENU by pressing the MENU (F2) button. If necessary, press ESC until MENU appears above F2.

2.Use the ▲▼ buttons to select MEMORY.

Press ENTER to display the MEMORY

MENU.

Fyrite® INSIGHT

3.Use the ▲▼ buttons to select Memory Direc- tory. Press ENTER to display the saved data contained in the Memory Directory.

TIP: When displaying the contents of the memory directory, the operator can quickly page through the screens by pressing the PAGE– (F1) and PAGE+ (F3) buttons. Or move to the first or last memory location by pressing the buttons, respectively.

To Clear Test Data:

1.Display the MAIN MENU by pressing the MENU (F2) button. If necessary, press ESC until MENU appears above F2.

2.Use the ▲▼ buttons to select MEMORY. Press ENTER to display the Memory Screen.

3.Use the ▲▼ buttons to select CLEAR MEMORY. Press ENTER to display the Clear Memory Options.

4.Use the ▲▼ buttons to select YES and press ENTER. The screen will briefly display a confirmation that the memory has been cleared.

28

Instruction 24-9460

 

Instruction 24-9460

29

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Fyrite Insight Table of Contents Fyrite Insight IntroductionFyrite Insight Features & Benefits Operational Overview Technical CharacteristicsPower Setting UP the AnalyzerConnecting the Probe Hose & Thermo- couple Preliminary StepsInsight Entering Setup Setup ModeTemperature Units Front Panel Push ButtonsClock Pressure Units5 O2 Reference Print Pressure9 Run/Hold Format UsernameCAL Reminder Period Language SelectionButton Sound Date Format Inactivity TimeoutPost-Purge Period Operation Analyzer Power On & Warm UpOperating Tips Fuel SelectionPerforming a Combustion Test Sampling PointMaking a Draft / Pressure Measurement Saving Test Data Temperature MeasurementEnding a Combustion Test Emptying the Water TrapMemory Powering OFF the Analyzer & PurgingLow Battery Alarm Press the Print F1 button to begin print- ing Fyrite User Software InstallationPrinting Test Data Windows Vista Operating System Fyrite User Software Description Calibration & MaintenanceSmart Sensors Starting a CalibrationMaterials Required Pressure Sensor CalibrationStack Calibration ProcedureTS-Zero Procedure TA-Zero Procedure TS-Span ProcedureAir Calibration Material RequiredCO Sensor Calibration TA-Span ProcedureMaintenance Fyrite Insight Disassembly Water Trap / Filter O2 Sensor ReplacementTools Required CO Sensor ReplacementThermocouple Replacement Cleaning the Probe Gas Pump ReplacementError Messages Parts & Tools RequiredStatus Screen Diagnostics ScreenUnited States Pennsylvania Service CentersCanada MéxicoHeadquarters Hunt Valley Circle, New Kensington, PA

INSIGHT specifications

Bacharach INSIGHT is a cutting-edge platform designed for HVAC professionals and building management teams, providing real-time insights and analytics for optimal system performance. Offering a seamless integration of hardware and software, INSIGHT enhances operational efficiency by transforming traditional data management paradigms.

One of the standout features of Bacharach INSIGHT is its user-friendly interface, which enables users to visualize data in an easily digestible format. The platform presents key metrics, historical trends, and system alerts, empowering users to make informed decisions quickly. This accessibility is crucial for technicians and managers who need to identify potential issues before they escalate, ensuring systems run smoothly and effectively.

Another significant characteristic of Bacharach INSIGHT is its advanced data analytics capabilities. The platform leverages machine learning algorithms to analyze performance data, identify patterns, and predict maintenance needs. This proactive approach minimizes downtime and extends the lifespan of HVAC systems, resulting in cost savings for organizations.

INSIGHT also incorporates IoT technologies, allowing for real-time data collection from various connected devices across an HVAC system. This integration ensures that users have access to accurate and timely information, facilitating immediate responses to any irregularities. The use of cloud technology enables data storage and access from anywhere, promoting collaboration among team members and stakeholders.

The platform is designed with scalability in mind, accommodating small businesses with singular HVAC units as well as large enterprises with complex, multi-site systems. This flexibility means that as organizations grow, Bacharach INSIGHT can adapt to their changing needs without requiring extensive modifications.

Furthermore, user customization options allow for tailored dashboards and alerts, ensuring that each team can focus on the most relevant metrics for their operations. This adaptability contributes to improved user experience, enhancing system usability and engagement.

In summary, Bacharach INSIGHT combines intuitive design, powerful analytics, IoT integration, and scalability to redefine HVAC management. By equipping users with actionable insights and fostering proactive maintenance practices, INSIGHT positions organizations to optimize their energy use, reduce costs, and improve overall system reliability. This innovative platform is pioneering a new era for HVAC professionals, facilitating smarter building management with robust, real-time analytics.
Top Page Image Contents