Bacharach INSIGHT manual Front Panel Push Buttons, Setup Mode, Entering Setup, Temperature Units

Page 8

Fyrite® INSIGHT

3.4 Front Panel Push Buttons

Note that a push button may perform several functions, depending on the analyzer’s model number and what screen is being displayed at the time.

•Powers the analyzer ON and OFF. Hold this button down for

at least 2 seconds to turn the power OFF.

•Toggles the backlight ON and OFF while the analyzer is turned ON.

• Scrolls up, down, left, and right through the display screen options.

• Up and Down arrows cause the displayed value to in- crease or decrease correspondingly.

• Acts as an ENTER button. Performs the action selected.

•While in the HOLD screen, turns the sample pump on, dis-

plays the RUN screen, and begins a combustion test.

•While in the RUN screen, turns the sample pump off, displays the HOLD screen and the last set of combustion data.

•Displays the HOLD screen while pressing it from most menus.

•Return the display to the HOLD screen while pressing it during the 5 second power down sequence.

• Cancels most operations and displays the previous screen.

• Pressing function keys accepts the corresponding function defined at the bottom of the display, including PRINT, SAVE, MENU, differential pressure ZERO, differential temperature ZERO, PAGE UP, PAGE DOWN and CLEAR data.

Fyrite® INSIGHT

3.5Setup Mode

The analyzer is preset at the factory for the parameters shown below, but can be changed as described in their corresponding sections.

Function

Parameter

To Change

 

 

 

Fuel

Natural Gas

Section 4.3

 

 

 

Temperature Unit

°F

Section 3.5.2

 

 

 

Pressure Unit

InWC

Section 3.5.3

 

 

 

Language

English

Section 3.5.10

 

 

 

CAL Reminder

Never

Section 3.5.12

 

 

 

Clock

Not Initialized

Section 3.5.4

 

 

 

3.5.1 Entering Setup

1.Display the MAIN MENU by pressing the

MENU (F2) button.

2.Use the ▲▼ buttons to highlight SETUP and press ENTER to display the SETUP

MENU.

3.5.2 Temperature Units

Select to display temperature in either ºF or ºC as follows:

1.Enter the Setup Menu per Section 3.5.1. If necessary, press ESC until MENU appears above F2.

2.From the SETUP MENU, use the ▲▼ but-

tons to select TEMPERATURE UNITS. Press ENTER to display the Temperature Units Menu.

3.Use the ▲▼ buttons to select the desired temperature unit.

4.Press ENTER to save selection and return to the SETUP MENU or ESC to revert the previous setting.

10

Instruction 24-9460

 

Instruction 24-9460

11

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Fyrite Insight Table of Contents Introduction Fyrite InsightFyrite Insight Features & Benefits Technical Characteristics Operational OverviewSetting UP the Analyzer PowerConnecting the Probe Hose & Thermo- couple Preliminary StepsInsight Setup Mode Entering SetupTemperature Units Front Panel Push ButtonsPressure Units Clock5 O2 Reference Print PressureUsername 9 Run/Hold FormatCAL Reminder Period Language SelectionButton Sound Date Format Inactivity TimeoutPost-Purge Period Analyzer Power On & Warm Up OperationOperating Tips Fuel SelectionSampling Point Performing a Combustion TestMaking a Draft / Pressure Measurement Temperature Measurement Saving Test DataEnding a Combustion Test Emptying the Water TrapMemory Powering OFF the Analyzer & PurgingLow Battery Alarm Press the Print F1 button to begin print- ing Fyrite User Software InstallationPrinting Test Data Windows Vista Operating System Calibration & Maintenance Fyrite User Software DescriptionSmart Sensors Starting a CalibrationPressure Sensor Calibration Materials RequiredStack Calibration ProcedureTS-Zero Procedure TS-Span Procedure TA-Zero ProcedureAir Calibration Material RequiredTA-Span Procedure CO Sensor CalibrationMaintenance Fyrite Insight Disassembly O2 Sensor Replacement Water Trap / FilterTools Required CO Sensor ReplacementThermocouple Replacement Gas Pump Replacement Cleaning the ProbeError Messages Parts & Tools RequiredDiagnostics Screen Status ScreenService Centers United States PennsylvaniaCanada MéxicoHeadquarters Hunt Valley Circle, New Kensington, PA

INSIGHT specifications

Bacharach INSIGHT is a cutting-edge platform designed for HVAC professionals and building management teams, providing real-time insights and analytics for optimal system performance. Offering a seamless integration of hardware and software, INSIGHT enhances operational efficiency by transforming traditional data management paradigms.

One of the standout features of Bacharach INSIGHT is its user-friendly interface, which enables users to visualize data in an easily digestible format. The platform presents key metrics, historical trends, and system alerts, empowering users to make informed decisions quickly. This accessibility is crucial for technicians and managers who need to identify potential issues before they escalate, ensuring systems run smoothly and effectively.

Another significant characteristic of Bacharach INSIGHT is its advanced data analytics capabilities. The platform leverages machine learning algorithms to analyze performance data, identify patterns, and predict maintenance needs. This proactive approach minimizes downtime and extends the lifespan of HVAC systems, resulting in cost savings for organizations.

INSIGHT also incorporates IoT technologies, allowing for real-time data collection from various connected devices across an HVAC system. This integration ensures that users have access to accurate and timely information, facilitating immediate responses to any irregularities. The use of cloud technology enables data storage and access from anywhere, promoting collaboration among team members and stakeholders.

The platform is designed with scalability in mind, accommodating small businesses with singular HVAC units as well as large enterprises with complex, multi-site systems. This flexibility means that as organizations grow, Bacharach INSIGHT can adapt to their changing needs without requiring extensive modifications.

Furthermore, user customization options allow for tailored dashboards and alerts, ensuring that each team can focus on the most relevant metrics for their operations. This adaptability contributes to improved user experience, enhancing system usability and engagement.

In summary, Bacharach INSIGHT combines intuitive design, powerful analytics, IoT integration, and scalability to redefine HVAC management. By equipping users with actionable insights and fostering proactive maintenance practices, INSIGHT positions organizations to optimize their energy use, reduce costs, and improve overall system reliability. This innovative platform is pioneering a new era for HVAC professionals, facilitating smarter building management with robust, real-time analytics.
Top Page Image Contents