Beckett CF1400 manual Limited Warranty Information

Page 24

Limited Warranty Information

The R. W. BECKETT CORPORATION (“Beckett”) warrants to persons who purchase its “Products” from Beckett for resale, or for incorporation into a product for resale (“Customers”), that its equipment is free from defects in material and workmanship. To qualify for warranty benefits, products must be installed by a qualified service agency in full compliance with all codes and authorities having jurisdiction, and used within the tolerances of Beckett’s defined product specifications.

To review the complete warranty policy and duration of coverage for a specific product, or obtain a written copy of warranty form 61545, please choose one of the following options:

1.Visit our website at: www.beckettcorp.com/warranty

2.Email your request to: rwb-customer-service@beckettcorp.com

3.Write to: R. W. Beckett Corporation, P. O. Box 1289, Elyria, OH 44036

NOTE: Beckett is not responsible for any labor cost for removal and replacement of equipment.

THIS WARRANTY IS LIMITED TO THE PRECISE TERMS SET FORTH ABOVE, AND PROVIDES EXCLUSIVE REMEDIES EXPRESSLY IN LIEU OF ALL OTHER REMEDIES, AND IN PARTICULAR THERE SHALL BE EXCLUDED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL BECKETT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE OF ANY NATURE. Beckett neither assumes, nor authorizes any person to assume for Beckett, any other liability or obligation in connection with the sale of this equipment. Beckett’s liability and Customer’s exclusive remedy is limited to the cost of the product.

USA: P.O. Box 1289 Elyria, Ohio 44036

Canada: R.W. Beckett Canada, Ltd. Unit #3, 430 Laird Road Guelph, Ontario N1G 3X7

www.beckettcorp.com

Part Number 6104 BCF23 R14, Printed in the U.S.A. 08/10

Image 24
Contents Potential for Fire, Smoke and Asphyxiation Hazards To the Homeowner or Equipment OwnerContents General Information Hazard DefinitionsFrozen Plumbing Water Damage Hazard Pre-Installation Checklist Combustion Air SupplyClearances Fuel Supply Oil Supply Pressure Control RequiredVent System Verify Burner ComponentsVerify Firing Rate Electrical SupplyVerify Air Tube Air Tube Capacity Versus Firebox Pressure± 1/8 Mount the Burner Protect Against Stray Light Lockout Failure to follow theseInstall Nozzle Check Electrode Settings Maintain Electrode SpecificationsInstall Nozzle Line Assembly Mount Air Tube to BurnerSet Z Dimension Fuel Unit By-pass Plug Factory-Installed Pump Bypass PlugInstall Oil Supply To Specifications Do not install valves in the return lineOne-pipe Oil System By-pass Loop Oil Supply/Return LinesBurner Fuel Flow Wire the Burner Electrical shock can cause severe personal injury or deathCan cause severe injury, death, or property damage Typical Burner Sequence of Operation Optional ComponentsTypical Wiring 7505P Typical Burner Sequence of Operation 7184B Control Restricted LockoutTampering with, or bypassing safety controls Prepare the Burner for Start-upCould lead to equipment malfunction and result Asphyxiation, explosion or fireCF1400 Initial Indicator Adjustment Plate Settings CF2300 Initial Indicator Adjustment Plate SettingsInitial Head Position Initial Air Settings Set Appliance Limit ControlsPrepare the Fuel Unit for Air Venting Professional Service Required Disable FunctionStart the Burner Explosion and Fire HazardOperating the Burner Set High-fire AirSet Low-fire Air Maintenance and Service Replacement PartsAnnual Professional Service Required Annual Service Burner Replacement Parts Part Name Description CF1400 Part No CF2300 Part No Oil Valve Mounted on Junction Box 21789USK9930 SK9936 SK9932 Limited Warranty Information
Related manuals
Manual 24 pages 57.78 Kb