Specifications/Hot Water Coil | |
|
Hot Water Coil
To install a hot water coil:
1.Remove the blank plate covering the water coil opening.
2.Insert the coil into the boiler as shown. Be sure to put a new gasket around the coil plate.
3.Tighten all bolts evenly.
4.Fill the boiler and check for leaks before and after the boiler is up to temperature. Rust caused by a leak can reduce the life of the boiler.
5.A tempering valve may be installed between the in and out pipes to reduce the maximum water temperature at the tap.
NOTE: This hot water coil is rated at 4 gallons per minute.