Energy Tech Laboratories MR212 manual

Page 7

Direct Fired Module Installation

Indoor (INLINE) Installation

Heat Module Add-On Installation

Modular heat units shipped to add heat onto existing blower only applications require field mechanical and wiring installation.

1.Remove existing filter intake and lifting lugs from blower section intake side.

2.Attach heat module to blower intake using the provided sheet metal screws and bolts. Tighten

screws and bolts securely to compress the gasket between the heat module and the blower module.

3. Support and level the end of the heat module (end opposite the blower) with the provided equipment legs/rails.

4. Attach the filter hood to the intake side of the heater module.

5.Drill a hole in the discharge of the blower large enough to insert the Maxitrol mixing tube and

discharge sensor (if provided). Install the Maxitrol mixing tube in the proper airflow direction. The airflow direction is labeled on the Maxitrol mixing tube.

6.Wire the sensor as indicated on the supplied wiring schematic. Run all wiring within metal conduit. Supply 120V AC to terminals 1 and N in the direct fired module.

7.Follow the start up instructions located in this manual.

7

Image 7
Contents Installation, Operation, and Maintenance Manual Page Table of Contents Warranty Site Preparation InstallationAssembly MechanicalRecommended Supply Ductwork Sizes Roof Mount Installation Installation with Exhaust FanPage Gas Connection Sizes GasGas Pressure Table Electrical Copper Wire AmpacityMotorized Intake Damper Fan to Building Wiring Connection Remote Control PanelStart Up OperationMain Burner Adjustment Heater Start Up Summary Yes Adjust pilot flame Lock unit into High firePulley Setscrew Torque Final Start Up ProcedureMaximum RPM and HP Chart Pulley Adjustment Illustration Pulley Adjustment10 20 IN. Blower Pulley Combination ChartSequence of Operation Flame Safety ControlFlame Safety Controller DC Flame Signal Air Flow SwitchModulating Gas System Maxitrol Amplifier High Temperature LimitOperation Summary Optional Remote Panel Circuit Blower SwitchComponents Remote Panel Option Airflow Troubleshooting Chart TroubleshootingProper Spark Gap Burner Troubleshooting ChartLight Indication Condition Possible Cause Remote Panel Troubleshooting ChartNothing Happens Troubleshooting FlowchartsGeneral Maintenance MaintenanceYearly Filter Quantity ChartWeeks after startup Every 3 monthsPage Job Information Start-Up and Maintenance DocumentationMaintenance Record Factory Service Department

MR212 specifications

Energy Tech Laboratories has made significant strides in the field of energy management and efficiency with its groundbreaking product, the MR212. Designed for both industrial and commercial applications, the MR212 stands out for its cutting-edge technology and impressive features that cater to the evolving demands of the energy sector.

One of the main features of the MR212 is its advanced energy monitoring capabilities. Utilizing state-of-the-art sensors and algorithms, the device provides real-time data on energy consumption, helping businesses identify inefficiencies and optimize their energy use. This feature is crucial for organizations aiming to reduce operational costs and minimize their carbon footprint.

The MR212 is equipped with predictive analytics that harnesses machine learning to forecast energy needs based on historical data and usage patterns. This enables users to make informed decisions regarding energy procurement and management, ultimately leading to significant cost savings. Additionally, the system integrates seamlessly with existing infrastructure, making it easy to install and use without requiring a complete overhaul of current operations.

Another notable characteristic of the MR212 is its user-friendly interface. The device features an intuitive dashboard that offers visual representations of energy data, allowing users to monitor performance at a glance. Customizable alerts and notifications help users stay informed of any anomalies or significant changes in energy usage, facilitating prompt action and issue resolution.

The MR212 also supports integration with renewable energy sources, such as solar and wind power. This capability is essential for organizations looking to transition to greener energy alternatives and leverage incentives for using renewable technologies. By integrating seamlessly with these sources, the MR212 not only enhances energy efficiency but also promotes sustainability.

Moreover, Energy Tech Laboratories has ensured that the MR212 is built to withstand industrial environments. With robust construction and compliance with various industry standards, the device is designed for longevity and reliability, providing users with peace of mind.

In conclusion, the Energy Tech Laboratories MR212 is a comprehensive energy management tool that combines advanced monitoring, predictive analytics, and seamless integration with renewable energy sources. Its user-friendly interface and durability make it an ideal choice for businesses seeking to enhance their energy efficiency and sustainability practices. As the demand for smarter energy solutions continues to rise, the MR212 stands at the forefront, paving the way for a more efficient and sustainable future.