Base unit dimensions (cont)
48SS048,060 WITHOUT OPTIONAL BASE RAIL
REQ'D CLEARANCES FOR SERVICING. in. (mm)
Duct panel . . . . . . . . . . . . . . . . . . . . . . . 0
Unit top . . . . . . . . . . . . . . . . . . . . . . 36 (914)
Side opposite ducts | . | . . . . . . . . . 36 | (914) |
Compressor access | . | . . . . . . . . . 36 | (914) |
(Except for NEC requirements) |
|
|
|
REQ'D CLEARANCES TO COMBUSTIBLE MAT'L. in. (mm) |
| ||
Maximum extension of overhangs |
| . . . . . . . . . 48 (1219) |
Unit top . . . . . . . . . . . . . . . . . . . . . . 14 (356)
Duct side of unit . . . . . . . . . . . . . . . . . . . 2 (51)
Side opposite ducts . . . . . . . . . . . . . . . . 14 (356)
Bottom of unit . . . . . . . . . . . . . . . . . . . . . . 0
Flue panel | . | . 36 (914) | |
NEC REQ'D CLEARANCES. in. (mm) |
|
| |
|
| . 42 (1067) | |
Between units, control box side . . | . . . . . . . |
| |
Unit and ungrounded surfaces, control box side . . | . | . 36 (914) | |
Unit and block or concrete walls and other grounded |
|
| |
surfaces, control box side |
| . 42 (1067) |
| ELECTRICAL | UNIT WEIGHT |
| CORNER WEIGHT |
| |||
UNIT |
|
| (lb/kg) |
| ||||
CHARACTERISTICS |
|
|
|
|
| |||
|
| lb | kg | A | B |
| C | D |
48SS048080 | 414 | 188 | 107/49 | 83/38 |
| 158/72 | 66/30 | |
48SS048100/120/140 | 426 | 193 | 110/50 | 86/39 |
| 159/72 | 71/32 | |
48SS060080 | 453 | 206 | 117/53 | 93/42 |
| 167/76 | 76/35 | |
48SS060100/120/140 | 465 | 211 | 120/55 | 96/44 |
| 167/76 | 82/37 |
UNIT | CENTER OF GRAVITY (in./mm) | ||
| X | Y | Z |
48SS048080 | 28.76/731 | 23.46/596 | 15.35/390 |
48SS048100/120/140 | 28.42/722 | 23.42/595 | 15.35/390 |
48SS060080 | 28.36/720 | 23.27/591 | 15.35/390 |
48SS060100/120/140 | 27.95/710 | 23.23/590 | 15.35/390 |
|
| LEGEND |
|
| |
CG | Ð | Center of Gravity | MAT'L | Ð | Material |
COND | Ð Condenser | NEC | Ð National Electrical Code | ||
LV | Ð | Low Voltage | REQ'D | Ð | Required |
NOTES:
1.Clearances must be maintained to prevent recirculation of air from
2.Adequate clearance around air openings into combustion chamber must be provided.
10