BRK electronic CO3000BN user manual If Your CO Alarm Alarms, If the Alarm Signal Sounds

Page 11

CHAPTER 3: If Your CO Alarm Alarms

WARNING!

Actuation of your CO alarm indicates the presence of carbon monoxide (CO) which can kill you. In other words, when your CO Alarm alarms, you must not ignore it!

If the Alarm Signal Sounds:

1.Operate the Test/Silence button.

2.Call your emergency services, fire department or 911. Write down the number of your local emergency service here:

3.Immediately move to fresh air—outdoors or by an open door or window. Do a head count to check that all persons are accounted for. Do not re-enter the premises, or move away from the open door or window until the emergency services responder has arrived, the premises have been aired out, and your CO alarm remains in its normal condition.

4.After following steps 1-3, if your CO alarm reactivates within a 24-hour period, repeat steps 1-3 and call a qualified appliance technician to investigate for sources of CO from fuel-burning equipment and appliances, and inspect for proper operation of this equipment. If problems are identified during this inspection have the equipment serviced

immediately. Note any combustion equipment not inspected by the technician, and consult the manufacturers’ instructions, or contact the manufacturers directly, for more information about CO safety and this equipment. Make sure that motor vehicles are not, and have not, been operating in an attached garage or adjacent to the residence. Write down the number of a qualified appliance technician here:

_______________________________________

“ALARM-MOVE TO FRESH AIR”

If you hear the alarm horn and the red light is flashing, move everyone to a source of fresh air. DO NOT move the CO Alarm!

Finding the Source of CO

After an Alarm

Because CO may dissipate by the time an investigator arrives, it may be difficult to locate the source of CO. See Chapter 5 “What You Must Know About CO.” BRK Brands, Inc. shall not be obligated to pay for any carbon monoxide investigation or service call.

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model CO3000BN-User’s Manual Table of Contents Introduction Basic Safety InformationGeneral Information HOW Your CO Alarm WorksCover of Your CO Alarm LOW Battery Warning What the Lights and Alarm Tones MeanCO Alarm Specifications A Multi-level Home InstallationWhere to Install CO Alarms A Single-level HomeDo not locate this CO Alarm Where not to Install Your CO AlarmInstalling the 9V Battery HOW to Install Your CO AlarmTo Mount On The Wall For Tabletop UseFinding the Source of CO After an Alarm If Your CO Alarm AlarmsIf the Alarm Signal Sounds This means Using the Silence FeatureWhile the alarm is silenced If the CO Alarm Weekly Testing Testing and MaintenanceChoosing a replacement battery Regular MaintenanceTo keep the CO Alarm in good working order What You Need To Know About CO What is CO?Symptoms of CO Poisoning Potential Sources Of CO In The Home How Can I Protect My Family? Underwriters Laboratories Inc. UL2034 What Levels of CO Cause an Alarm?UL2034 Required Alarm Points Problem This means You should Troubleshooting GuideGeneral Limitations Of CO Alarms Enterprise Court, Aurora, IL Limited Warranty

CO3000BN specifications

The BRK Electronic CO3000BN is a state-of-the-art carbon monoxide (CO) detector designed to enhance safety in residential and commercial environments. This sophisticated device incorporates a range of advanced technologies to ensure the highest level of protection against the dangers of carbon monoxide exposure.

One of the standout features of the CO3000BN is its electrochemical sensor, which is recognized as one of the most reliable sensor technologies available. This type of sensor is specifically engineered to detect low levels of carbon monoxide with exceptional accuracy, providing peace of mind to users. The device responds quickly to the presence of CO, alerting occupants immediately with a loud alarm, thus allowing for timely evacuation.

The CO3000BN is equipped with a digital display that provides real-time readings of carbon monoxide levels. This feature is incredibly beneficial as it allows users to monitor CO levels continuously, making it easier to identify potential hazards before they escalate. The display also features a low battery indicator, ensuring that users are always informed about the operational status of the unit.

In terms of installation, the CO3000BN is designed for easy mounting on walls or ceilings, providing flexibility for users to place the detector in the most strategic locations within their property. The device is powered by a 9-volt battery, ensuring it remains functional even during power outages, a crucial feature for maintaining safety in emergency situations.

The CO3000BN adheres to the highest safety standards and certifications, ensuring its reliability and effectiveness in detecting carbon monoxide. It also comes with a manufacturer’s warranty, reflecting the company’s confidence in the product’s durability and performance.

In summary, the BRK Electronic CO3000BN stand out with its advanced electrochemical sensor, digital display for real-time monitoring, easy installation, and reliable battery power. Combined with its adherence to safety standards, the CO3000BN is an essential device for anyone looking to enhance safety against the silent threat of carbon monoxide, making it an invaluable addition to any home or business.
Top Page Image Contents