BRK electronic CO3000BN user manual Introduction, Basic Safety Information

Page 3

CHAPTER 1: Introduction

BASIC SAFETY INFORMATION

IMPORTANT!

Dangers, Warnings, and Cautions alert you to important operating instructions or to potentially hazardous situations. Pay special attention to these items.

IMPORTANT!

THIS IS NOT A SMOKE ALARM! This CO Alarm is designed to detect carbon monoxide from ANY source of combustion. It is NOT designed to detect smoke, fire, or any other gas.

IMPORTANT!

This CO Alarm is approved for use in single- family residences. It is NOT designed for marine use.

CAUTION!

This CO Alarm will only indicate the presence of carbon monoxide gas at the sensor. Carbon monoxide gas may be present in other areas.

WARNING!

The Silence Feature is for your convenience only and will not correct a CO problem. Always check your home for a potential problem after any alarm. Failure to do so can result in injury or death.

WARNING!

This CO Alarm does not operate without a working battery. Removing the battery, or failure to replace it at the end of its service life, removes your protection.

WARNING!

NEVER ignore your carbon monoxide alarm if it alarms. Refer to “What To Do If Your CO Alarm Alarms” for more information. Failure to do so can result in injury or death.

WARNING!

Test the CO Alarm once a week. If the CO Alarm ever fails to test correctly, have it replaced immediately! If the CO Alarm is not working properly, it cannot alert you to a problem.

WARNING!

This product is intended for use in ordinary indoor locations of family living units. It is not designed to measure CO levels in compliance with Occupational Safety and Health Administration (OSHA) commercial or industrial standards. Individuals with medical conditions may consider using warning devices which provide audible and visual signals for carbon monoxide concentrations under 30 ppm.

1

Image 3
Contents Model CO3000BN-User’s Manual Table of Contents Introduction Basic Safety InformationHOW Your CO Alarm Works Cover of Your CO AlarmGeneral Information LOW Battery Warning What the Lights and Alarm Tones MeanCO Alarm Specifications A Multi-level Home InstallationWhere to Install CO Alarms A Single-level HomeDo not locate this CO Alarm Where not to Install Your CO AlarmInstalling the 9V Battery HOW to Install Your CO AlarmTo Mount On The Wall For Tabletop UseIf Your CO Alarm Alarms If the Alarm Signal SoundsFinding the Source of CO After an Alarm Using the Silence Feature While the alarm is silenced If the CO AlarmThis means Weekly Testing Testing and MaintenanceRegular Maintenance To keep the CO Alarm in good working orderChoosing a replacement battery What is CO? Symptoms of CO PoisoningWhat You Need To Know About CO Potential Sources Of CO In The Home How Can I Protect My Family? What Levels of CO Cause an Alarm? UL2034 Required Alarm PointsUnderwriters Laboratories Inc. UL2034 Problem This means You should Troubleshooting GuideGeneral Limitations Of CO Alarms Enterprise Court, Aurora, IL Limited Warranty

CO3000BN specifications

The BRK Electronic CO3000BN is a state-of-the-art carbon monoxide (CO) detector designed to enhance safety in residential and commercial environments. This sophisticated device incorporates a range of advanced technologies to ensure the highest level of protection against the dangers of carbon monoxide exposure.

One of the standout features of the CO3000BN is its electrochemical sensor, which is recognized as one of the most reliable sensor technologies available. This type of sensor is specifically engineered to detect low levels of carbon monoxide with exceptional accuracy, providing peace of mind to users. The device responds quickly to the presence of CO, alerting occupants immediately with a loud alarm, thus allowing for timely evacuation.

The CO3000BN is equipped with a digital display that provides real-time readings of carbon monoxide levels. This feature is incredibly beneficial as it allows users to monitor CO levels continuously, making it easier to identify potential hazards before they escalate. The display also features a low battery indicator, ensuring that users are always informed about the operational status of the unit.

In terms of installation, the CO3000BN is designed for easy mounting on walls or ceilings, providing flexibility for users to place the detector in the most strategic locations within their property. The device is powered by a 9-volt battery, ensuring it remains functional even during power outages, a crucial feature for maintaining safety in emergency situations.

The CO3000BN adheres to the highest safety standards and certifications, ensuring its reliability and effectiveness in detecting carbon monoxide. It also comes with a manufacturer’s warranty, reflecting the company’s confidence in the product’s durability and performance.

In summary, the BRK Electronic CO3000BN stand out with its advanced electrochemical sensor, digital display for real-time monitoring, easy installation, and reliable battery power. Combined with its adherence to safety standards, the CO3000BN is an essential device for anyone looking to enhance safety against the silent threat of carbon monoxide, making it an invaluable addition to any home or business.