BRK electronic CO3000BN user manual Potential Sources Of CO In The Home

Page 16

Potential Sources Of CO In The Home

Fuel-burning appliances like: portable heater, gas or wood burning fireplace, gas kitchen range or cooktop, gas clothes dryer.

Damaged or insufficient venting: corroded or disconnected water heater vent pipe, leaking chimney pipe or flue, or cracked heat exchanger, blocked or clogged chimney opening.

Improper use of appliance/device: operating a barbecue grill or vehicle in an enclosed area (like a garage or screened porch).

Transient CO Problems: “transient” or on- again-off-again CO problems can be caused by outdoor conditions and other special circumstances.

14

The following conditions can result in transient CO situations:

1.Excessive spillage or reverse venting of fuel appliances caused by outdoor conditions such as:

Wind direction and/or velocity, including high, gusty winds. Heavy air in the vent pipes (cold/humid air with extended periods between cycles).

Negative pressure differential resulting from the use of exhaust fans.

Several appliances running at the same time competing for limited fresh air.

Vent pipe connections vibrating loose from clothes dryers, furnaces, or water heaters.

Obstructions in or unconventional vent pipe designs which can amplify the above situations.

2.Extended operation of unvented fuel burning devices (range, oven, fireplace).

3.Temperature inversions, which can trap exhaust close to the ground.

4.Car idling in an open or closed attached garage, or near a home.

These conditions are dangerous because they can trap exhaust in your home. Since these conditions can come and go, they are also hard to recreate during a CO investigation.

Image 16
Contents Model CO3000BN-User’s Manual Table of Contents Basic Safety Information IntroductionCover of Your CO Alarm HOW Your CO Alarm WorksGeneral Information What the Lights and Alarm Tones Mean LOW Battery WarningCO Alarm Specifications Installation Where to Install CO AlarmsA Single-level Home A Multi-level HomeWhere not to Install Your CO Alarm Do not locate this CO AlarmHOW to Install Your CO Alarm Installing the 9V BatteryFor Tabletop Use To Mount On The WallIf the Alarm Signal Sounds If Your CO Alarm AlarmsFinding the Source of CO After an Alarm While the alarm is silenced If the CO Alarm Using the Silence FeatureThis means Testing and Maintenance Weekly TestingTo keep the CO Alarm in good working order Regular MaintenanceChoosing a replacement battery Symptoms of CO Poisoning What is CO?What You Need To Know About CO Potential Sources Of CO In The Home How Can I Protect My Family? UL2034 Required Alarm Points What Levels of CO Cause an Alarm?Underwriters Laboratories Inc. UL2034 Troubleshooting Guide Problem This means You shouldGeneral Limitations Of CO Alarms Limited Warranty Enterprise Court, Aurora, IL

CO3000BN specifications

The BRK Electronic CO3000BN is a state-of-the-art carbon monoxide (CO) detector designed to enhance safety in residential and commercial environments. This sophisticated device incorporates a range of advanced technologies to ensure the highest level of protection against the dangers of carbon monoxide exposure.

One of the standout features of the CO3000BN is its electrochemical sensor, which is recognized as one of the most reliable sensor technologies available. This type of sensor is specifically engineered to detect low levels of carbon monoxide with exceptional accuracy, providing peace of mind to users. The device responds quickly to the presence of CO, alerting occupants immediately with a loud alarm, thus allowing for timely evacuation.

The CO3000BN is equipped with a digital display that provides real-time readings of carbon monoxide levels. This feature is incredibly beneficial as it allows users to monitor CO levels continuously, making it easier to identify potential hazards before they escalate. The display also features a low battery indicator, ensuring that users are always informed about the operational status of the unit.

In terms of installation, the CO3000BN is designed for easy mounting on walls or ceilings, providing flexibility for users to place the detector in the most strategic locations within their property. The device is powered by a 9-volt battery, ensuring it remains functional even during power outages, a crucial feature for maintaining safety in emergency situations.

The CO3000BN adheres to the highest safety standards and certifications, ensuring its reliability and effectiveness in detecting carbon monoxide. It also comes with a manufacturer’s warranty, reflecting the company’s confidence in the product’s durability and performance.

In summary, the BRK Electronic CO3000BN stand out with its advanced electrochemical sensor, digital display for real-time monitoring, easy installation, and reliable battery power. Combined with its adherence to safety standards, the CO3000BN is an essential device for anyone looking to enhance safety against the silent threat of carbon monoxide, making it an invaluable addition to any home or business.