BRK electronic CO3000BN Regular Maintenance, To keep the CO Alarm in good working order

Page 14

REGULAR MAINTENANCE

To keep the CO Alarm in good working order:

Test it every week using the Test/Silence button.

Vacuum the CO Alarm cover at least twice a year, using the soft brush attachment. Test the Alarm again after vacuuming.

Replace the battery when the CO Alarm “chirps” and the yellow light blinks twice a minute (the low battery warning).

NOTE:

The low battery warning should last for 30 days, but you should replace the battery immediately to continue your protection.

Choosing a replacement battery:

This unit requires one standard 9V alkaline battery. The following alkaline batteries are acceptable as replacements: Duracell #MN1604. You can also use an Ultralife 9 volt lithium battery #U9VL for longer service life between battery changes. These replacement batteries are commonly available at local retail stores.

IMPORTANT!

Use only the alkaline or lithium replacement batteries listed. The unit may not operate properly with other batteries. Never use rechargeable batteries since they may not provide a constant charge.

CAUTION!

DO NOT spray cleaning chemicals or insect sprays directly on or near the CO Alarm. DO NOT paint over the CO Alarm. Doing so may permanently damage the CO Alarm.

IMPORTANT!

Household cleaners, aerosol chemicals, and other contaminants can affect the sensor. When using any of these materials near the alarm, make sure the room is well ventilated.

12

Image 14
Contents Model CO3000BN-User’s Manual Table of Contents Basic Safety Information IntroductionGeneral Information HOW Your CO Alarm WorksCover of Your CO Alarm What the Lights and Alarm Tones Mean LOW Battery WarningCO Alarm Specifications A Single-level Home InstallationWhere to Install CO Alarms A Multi-level HomeWhere not to Install Your CO Alarm Do not locate this CO AlarmHOW to Install Your CO Alarm Installing the 9V BatteryFor Tabletop Use To Mount On The WallFinding the Source of CO After an Alarm If Your CO Alarm AlarmsIf the Alarm Signal Sounds This means Using the Silence FeatureWhile the alarm is silenced If the CO Alarm Testing and Maintenance Weekly TestingChoosing a replacement battery Regular MaintenanceTo keep the CO Alarm in good working order What You Need To Know About CO What is CO?Symptoms of CO Poisoning Potential Sources Of CO In The Home How Can I Protect My Family? Underwriters Laboratories Inc. UL2034 What Levels of CO Cause an Alarm?UL2034 Required Alarm Points Troubleshooting Guide Problem This means You shouldGeneral Limitations Of CO Alarms Limited Warranty Enterprise Court, Aurora, IL

CO3000BN specifications

The BRK Electronic CO3000BN is a state-of-the-art carbon monoxide (CO) detector designed to enhance safety in residential and commercial environments. This sophisticated device incorporates a range of advanced technologies to ensure the highest level of protection against the dangers of carbon monoxide exposure.

One of the standout features of the CO3000BN is its electrochemical sensor, which is recognized as one of the most reliable sensor technologies available. This type of sensor is specifically engineered to detect low levels of carbon monoxide with exceptional accuracy, providing peace of mind to users. The device responds quickly to the presence of CO, alerting occupants immediately with a loud alarm, thus allowing for timely evacuation.

The CO3000BN is equipped with a digital display that provides real-time readings of carbon monoxide levels. This feature is incredibly beneficial as it allows users to monitor CO levels continuously, making it easier to identify potential hazards before they escalate. The display also features a low battery indicator, ensuring that users are always informed about the operational status of the unit.

In terms of installation, the CO3000BN is designed for easy mounting on walls or ceilings, providing flexibility for users to place the detector in the most strategic locations within their property. The device is powered by a 9-volt battery, ensuring it remains functional even during power outages, a crucial feature for maintaining safety in emergency situations.

The CO3000BN adheres to the highest safety standards and certifications, ensuring its reliability and effectiveness in detecting carbon monoxide. It also comes with a manufacturer’s warranty, reflecting the company’s confidence in the product’s durability and performance.

In summary, the BRK Electronic CO3000BN stand out with its advanced electrochemical sensor, digital display for real-time monitoring, easy installation, and reliable battery power. Combined with its adherence to safety standards, the CO3000BN is an essential device for anyone looking to enhance safety against the silent threat of carbon monoxide, making it an invaluable addition to any home or business.