BRK electronic CO3000BN Using the Silence Feature, While the alarm is silenced If the CO Alarm

Page 12

Using the Silence Feature

WARNING!

NEVER remove the batteries from your CO Alarm to silence the horn. Use the silence feature. Removing the batteries removes your protection! See previous page for details on responding to an alarm.

The silence feature is intended to temporarily silence your CO Alarm’s alarm horn while you correct the problem—it will not correct a CO problem. While the alarm is silenced, it will continue to monitor the air for CO.

When CO reaches the alarm level, the Alarm will sound— repeating horn pattern:

4 beeps, a pause, 4 beeps, etc. Press and hold the Test/Silence button until the horn is silent. The initial Silence cycle will last approximately 4 minutes.

NOTE:

After initial 4-minute Silence cycle, the CO Alarm re-evaluates present CO levels and responds accordingly. If CO levels remain potentially dangerous—or start rising higher— the horn will start sounding again.

While the alarm is silenced:

If the CO Alarm...

remains silent after you pressed the Test/

Silence button...

This means...

CO levels are dropping.

If the CO Alarm...

goes back into alarm 4 minutes after you

pressed the Test/Silence button...

This means...

CO levels present indicate a potentially dangerous situation.

10

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Model CO3000BN-User’s Manual Table of Contents Basic Safety Information IntroductionHOW Your CO Alarm Works Cover of Your CO AlarmGeneral Information What the Lights and Alarm Tones Mean LOW Battery WarningCO Alarm Specifications Installation Where to Install CO AlarmsA Single-level Home A Multi-level HomeWhere not to Install Your CO Alarm Do not locate this CO AlarmHOW to Install Your CO Alarm Installing the 9V BatteryFor Tabletop Use To Mount On The WallIf Your CO Alarm Alarms If the Alarm Signal SoundsFinding the Source of CO After an Alarm Using the Silence Feature While the alarm is silenced If the CO AlarmThis means Testing and Maintenance Weekly TestingRegular Maintenance To keep the CO Alarm in good working orderChoosing a replacement battery What is CO? Symptoms of CO PoisoningWhat You Need To Know About CO Potential Sources Of CO In The Home How Can I Protect My Family? What Levels of CO Cause an Alarm? UL2034 Required Alarm PointsUnderwriters Laboratories Inc. UL2034 Troubleshooting Guide Problem This means You shouldGeneral Limitations Of CO Alarms Limited Warranty Enterprise Court, Aurora, IL

CO3000BN specifications

The BRK Electronic CO3000BN is a state-of-the-art carbon monoxide (CO) detector designed to enhance safety in residential and commercial environments. This sophisticated device incorporates a range of advanced technologies to ensure the highest level of protection against the dangers of carbon monoxide exposure.

One of the standout features of the CO3000BN is its electrochemical sensor, which is recognized as one of the most reliable sensor technologies available. This type of sensor is specifically engineered to detect low levels of carbon monoxide with exceptional accuracy, providing peace of mind to users. The device responds quickly to the presence of CO, alerting occupants immediately with a loud alarm, thus allowing for timely evacuation.

The CO3000BN is equipped with a digital display that provides real-time readings of carbon monoxide levels. This feature is incredibly beneficial as it allows users to monitor CO levels continuously, making it easier to identify potential hazards before they escalate. The display also features a low battery indicator, ensuring that users are always informed about the operational status of the unit.

In terms of installation, the CO3000BN is designed for easy mounting on walls or ceilings, providing flexibility for users to place the detector in the most strategic locations within their property. The device is powered by a 9-volt battery, ensuring it remains functional even during power outages, a crucial feature for maintaining safety in emergency situations.

The CO3000BN adheres to the highest safety standards and certifications, ensuring its reliability and effectiveness in detecting carbon monoxide. It also comes with a manufacturer’s warranty, reflecting the company’s confidence in the product’s durability and performance.

In summary, the BRK Electronic CO3000BN stand out with its advanced electrochemical sensor, digital display for real-time monitoring, easy installation, and reliable battery power. Combined with its adherence to safety standards, the CO3000BN is an essential device for anyone looking to enhance safety against the silent threat of carbon monoxide, making it an invaluable addition to any home or business.
Top Page Image Contents