BRK electronic CO3000BN user manual CO Alarm Specifications

Page 6

CO ALARM SPECIFICATIONS

Gas Detection at Typical Temperature and Humidity Ranges: The CO Alarm is not formulated to detect CO levels below 30 ppm typically. UL tested for false alarm resistance to Methane (500 ppm), Butane (300 ppm), Heptane (500 ppm), Ethyl Acetate (200 ppm), Isopropyl Alcohol (200 ppm) and Carbon Dioxide (5000 ppm). Values measure gas and vapor concentrations in parts per million.

Required Alarm Levels: Before 10% COHb exposure at levels of 30% to 70% Relative Humidity (RH):

•400 ppm CO between 4 and 15 minutes

•150 ppm CO between 10 and 50 minutes

•70 ppm CO between 60 and 240 minutes

The unit is designed not to alarm when exposed to a constant level of 30 ppm for 30 days.

Audible Alarm: 85dB minimum at 10 feet

Power: Powered by 9V battery. Green light flashes about twice a minute when device is receiving battery power.

During Alarm: CO Alarm horn sounds while the red light flashes rapidly.

This CO alarm is designed to sound for up to 12 hours in alarm conditions, provided the battery is fresh and installed correctly.

4

Warranty: 5-year limited warranty.

Standards: Underwriters Laboratories Inc. Single and Multiple Station carbon monoxide alarms UL2034.

According to Underwriters Laboratories Inc. UL2034, Section 1-1.2: “Carbon monoxide alarms covered by these requirements are intended to respond to the presence of carbon monoxide from sources such as, but not limited to, exhaust from internal-combustion engines, abnormal operation of fuel-fired appliances, and fireplaces. CO alarms are intended to alarm at carbon monoxide levels below those that could cause a loss of ability to react to the dangers of Carbon Monoxide exposure.” This CO Alarm monitors the air, and is designed to alarm before CO levels become life threatening. This allows you precious time to leave the house and correct the problem. This is only possible if alarms are located, installed, and maintained as described in this manual.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model CO3000BN-User’s Manual Table of Contents Basic Safety Information IntroductionHOW Your CO Alarm Works Cover of Your CO AlarmGeneral Information What the Lights and Alarm Tones Mean LOW Battery WarningCO Alarm Specifications A Single-level Home InstallationWhere to Install CO Alarms A Multi-level HomeWhere not to Install Your CO Alarm Do not locate this CO AlarmHOW to Install Your CO Alarm Installing the 9V BatteryFor Tabletop Use To Mount On The WallIf Your CO Alarm Alarms If the Alarm Signal SoundsFinding the Source of CO After an Alarm Using the Silence Feature While the alarm is silenced If the CO AlarmThis means Testing and Maintenance Weekly TestingRegular Maintenance To keep the CO Alarm in good working orderChoosing a replacement battery What is CO? Symptoms of CO PoisoningWhat You Need To Know About CO Potential Sources Of CO In The Home How Can I Protect My Family? What Levels of CO Cause an Alarm? UL2034 Required Alarm PointsUnderwriters Laboratories Inc. UL2034 Troubleshooting Guide Problem This means You shouldGeneral Limitations Of CO Alarms Limited Warranty Enterprise Court, Aurora, IL

CO3000BN specifications

The BRK Electronic CO3000BN is a state-of-the-art carbon monoxide (CO) detector designed to enhance safety in residential and commercial environments. This sophisticated device incorporates a range of advanced technologies to ensure the highest level of protection against the dangers of carbon monoxide exposure.

One of the standout features of the CO3000BN is its electrochemical sensor, which is recognized as one of the most reliable sensor technologies available. This type of sensor is specifically engineered to detect low levels of carbon monoxide with exceptional accuracy, providing peace of mind to users. The device responds quickly to the presence of CO, alerting occupants immediately with a loud alarm, thus allowing for timely evacuation.

The CO3000BN is equipped with a digital display that provides real-time readings of carbon monoxide levels. This feature is incredibly beneficial as it allows users to monitor CO levels continuously, making it easier to identify potential hazards before they escalate. The display also features a low battery indicator, ensuring that users are always informed about the operational status of the unit.

In terms of installation, the CO3000BN is designed for easy mounting on walls or ceilings, providing flexibility for users to place the detector in the most strategic locations within their property. The device is powered by a 9-volt battery, ensuring it remains functional even during power outages, a crucial feature for maintaining safety in emergency situations.

The CO3000BN adheres to the highest safety standards and certifications, ensuring its reliability and effectiveness in detecting carbon monoxide. It also comes with a manufacturer’s warranty, reflecting the company’s confidence in the product’s durability and performance.

In summary, the BRK Electronic CO3000BN stand out with its advanced electrochemical sensor, digital display for real-time monitoring, easy installation, and reliable battery power. Combined with its adherence to safety standards, the CO3000BN is an essential device for anyone looking to enhance safety against the silent threat of carbon monoxide, making it an invaluable addition to any home or business.
Top Page Image Contents