BRK electronic CO3000BN user manual Testing and Maintenance, Weekly Testing

Page 13

CHAPTER 4: Testing and Maintenance

WEEKLY TESTING

WARNING!

DO NOT stand close to the alarm when the horn is sounding. Exposure at close range may be harmful to your hearing. When testing, step away when horn starts sounding.

Push and hold the Test/Silence button on the cover until you hear a “chirp.” The “chirp” marks the start of the self-test sequence.

First, the BATTERY (green) and

SERVICE (yellow) lights will flash briefly— this is normal.

Next, the alarm horn will sound: 4 beeps, a pause, then 4 beeps. The ALARM (red) light will flash quickly.

The alarm sequence should last 5-6 seconds. If it does not alarm, make sure the battery is correctly installed, and test it again. If the unit still does not alarm, replace it immediately.

NOTE:

When you press and hold the Test/Silence button, if the battery is low or weak, the BATTERY light will flash YELLOW. Even if the horn sounds, you should replace a low or weak battery immediately for optimum performance.

If the alarm does not test properly:

1.Make sure the battery is installed correctly.

2.Be sure the alarm is clean and dust-free.

3.Install a fresh 9V alkaline or lithium battery* and test the alarm again.

If the CO Alarm is not working properly, refer to the “Limited Warranty” at the end of this manual.

CAUTION!

If there is still a problem, do not try to fix the alarm yourself—this will void your warranty! Install a new CO Alarm immediately. CO Alarms under warranty can be returned to BRK Brands, Inc. for replacement (see Limited Warranty for details).

WARNING!

The Test/Silence button is the only proper way to test the CO Alarm. NEVER use vehicle exhaust! Exhaust may cause permanent damage and voids your warranty.

*For a list of acceptable replacement batteries, see “Regular Maintenance.”

11

Image 13
Contents Model CO3000BN-User’s Manual Table of Contents Introduction Basic Safety InformationCover of Your CO Alarm HOW Your CO Alarm WorksGeneral Information LOW Battery Warning What the Lights and Alarm Tones MeanCO Alarm Specifications Where to Install CO Alarms InstallationA Single-level Home A Multi-level HomeDo not locate this CO Alarm Where not to Install Your CO AlarmInstalling the 9V Battery HOW to Install Your CO AlarmTo Mount On The Wall For Tabletop UseIf the Alarm Signal Sounds If Your CO Alarm AlarmsFinding the Source of CO After an Alarm While the alarm is silenced If the CO Alarm Using the Silence FeatureThis means Weekly Testing Testing and MaintenanceTo keep the CO Alarm in good working order Regular MaintenanceChoosing a replacement battery Symptoms of CO Poisoning What is CO?What You Need To Know About CO Potential Sources Of CO In The Home How Can I Protect My Family? UL2034 Required Alarm Points What Levels of CO Cause an Alarm?Underwriters Laboratories Inc. UL2034 Problem This means You should Troubleshooting GuideGeneral Limitations Of CO Alarms Enterprise Court, Aurora, IL Limited Warranty

CO3000BN specifications

The BRK Electronic CO3000BN is a state-of-the-art carbon monoxide (CO) detector designed to enhance safety in residential and commercial environments. This sophisticated device incorporates a range of advanced technologies to ensure the highest level of protection against the dangers of carbon monoxide exposure.

One of the standout features of the CO3000BN is its electrochemical sensor, which is recognized as one of the most reliable sensor technologies available. This type of sensor is specifically engineered to detect low levels of carbon monoxide with exceptional accuracy, providing peace of mind to users. The device responds quickly to the presence of CO, alerting occupants immediately with a loud alarm, thus allowing for timely evacuation.

The CO3000BN is equipped with a digital display that provides real-time readings of carbon monoxide levels. This feature is incredibly beneficial as it allows users to monitor CO levels continuously, making it easier to identify potential hazards before they escalate. The display also features a low battery indicator, ensuring that users are always informed about the operational status of the unit.

In terms of installation, the CO3000BN is designed for easy mounting on walls or ceilings, providing flexibility for users to place the detector in the most strategic locations within their property. The device is powered by a 9-volt battery, ensuring it remains functional even during power outages, a crucial feature for maintaining safety in emergency situations.

The CO3000BN adheres to the highest safety standards and certifications, ensuring its reliability and effectiveness in detecting carbon monoxide. It also comes with a manufacturer’s warranty, reflecting the company’s confidence in the product’s durability and performance.

In summary, the BRK Electronic CO3000BN stand out with its advanced electrochemical sensor, digital display for real-time monitoring, easy installation, and reliable battery power. Combined with its adherence to safety standards, the CO3000BN is an essential device for anyone looking to enhance safety against the silent threat of carbon monoxide, making it an invaluable addition to any home or business.