For Tabletop Use, To Mount On The Wall | BRK electronic CO3000BN

For Tabletop Use

1. Close the battery compartment by sliding the mounting bracket/battery door back onto the back of the CO Alarm.

2.Test the CO Alarm as described below.

3.Set the CO Alarm in plain view on a table where it will not be blocked by any obstructions.Table height should not exceed 36” (92 cm).

IMPORTANT!

Put the CO Alarm where children and pets cannot reach it.

To Test this CO Alarm:

Push and hold the Test/Silence button on the cover until you hear a “chirp.” The “chirp” marks the start of the self-test sequence.

•First, the yellow and green lights will ﬂash brieﬂy—this is normal.

•Next, the alarm horn will sound: 4 beeps, a pause, then 4 beeps. The red light will ﬂash quickly.

The alarm sequence should last 5-6 seconds. If it does not alarm, make sure the battery is correctly installed, and test it again. If the unit still does not alarm, replace it immediately.

To Mount On The Wall

Tools you will need: pencil, drill with 3/16” or 5mm drill bit, ﬂathead screwdriver, hammer.

1.Choose a location on the wall. Do not install the alarm closer than 4” from where the wall meets the ceiling.

2.Hold the mounting

bracket against the wall, and make a mark inside each keyhole where you will drill your mounting hole.

3.Use a 3/16” drill bit to drill through the marks you made for the mounting holes.

4.Insert the plastic screw anchors into the mounting holes until they are ﬂush with the wall. If necessary, tap them gently with a hammer.

5.Line up the mounting bracket up with the

screw anchors, and screw the bracket onto the wall.

6. Slide the CO Alarm

onto the mounting bracket until you feel it click into place.

7.Test the CO Alarm as described in “To Test this CO Alarm.”

CO3000BN specifications

The BRK Electronic CO3000BN is a state-of-the-art carbon monoxide (CO) detector designed to enhance safety in residential and commercial environments. This sophisticated device incorporates a range of advanced technologies to ensure the highest level of protection against the dangers of carbon monoxide exposure.

One of the standout features of the CO3000BN is its electrochemical sensor, which is recognized as one of the most reliable sensor technologies available. This type of sensor is specifically engineered to detect low levels of carbon monoxide with exceptional accuracy, providing peace of mind to users. The device responds quickly to the presence of CO, alerting occupants immediately with a loud alarm, thus allowing for timely evacuation.

The CO3000BN is equipped with a digital display that provides real-time readings of carbon monoxide levels. This feature is incredibly beneficial as it allows users to monitor CO levels continuously, making it easier to identify potential hazards before they escalate. The display also features a low battery indicator, ensuring that users are always informed about the operational status of the unit.

In terms of installation, the CO3000BN is designed for easy mounting on walls or ceilings, providing flexibility for users to place the detector in the most strategic locations within their property. The device is powered by a 9-volt battery, ensuring it remains functional even during power outages, a crucial feature for maintaining safety in emergency situations.

The CO3000BN adheres to the highest safety standards and certifications, ensuring its reliability and effectiveness in detecting carbon monoxide. It also comes with a manufacturer’s warranty, reflecting the company’s confidence in the product’s durability and performance.

In summary, the BRK Electronic CO3000BN stand out with its advanced electrochemical sensor, digital display for real-time monitoring, easy installation, and reliable battery power. Combined with its adherence to safety standards, the CO3000BN is an essential device for anyone looking to enhance safety against the silent threat of carbon monoxide, making it an invaluable addition to any home or business.