BRK electronic CO3000BN user manual Troubleshooting Guide, Problem This means You should

Page 19

CHAPTER 7: Troubleshooting Guide

Problem...

This means...

You should...

 

 

 

The BATTERY Light turns

Low battery warning.

Install a new 9V alkaline or lithium battery*.

YELLOW. It flashes and the

 

 

horn “chirps” twice a minute.

 

 

 

 

 

During testing, when you

Low battery

Install a new 9V alkaline or lithium battery*.

press and hold the Test/

 

 

Silence button, the BATTERY

 

 

Light turns YELLOW.

 

 

 

 

 

Horn chirps and yellow

Unit needs to be

Units under warranty should be returned to

service light blinks three

replaced.

manufacturer for replacement. See “Limited

times every 30 seconds.

 

Warranty” for details.

 

 

 

CO Alarm goes back into

CO levels indicate a

IF YOU ARE FEELING SYMPTOMS OF CO

alarm 4 minutes after you

potentially dangerous

POISONING, EVACUATE your home and call

press the Test/Silence

situation.

911 or the Fire Department. If not, press the

button.

 

Test/Silence button again and keep

 

 

ventilating your home.

 

 

 

CO Alarm alarms frequently

The CO Alarm may be

Relocate your alarm. If frequent alarms

even though no high levels of

improperly located.

continue, have home rechecked for potential

CO are revealed in an

Refer to “Where to Install

CO problems. You may be experiencing an

investigation.

Your CO Alarm.”

intermittent CO problem.

 

 

 

*For a list of acceptable replacement batteries, see “Regular Maintenance.”

If you have any questions that cannot be answered by reading this manual, call our Consumer Affairs Department at 1-800-323-9005, 7:30 a.m. - 5:00 p.m. (CT).

17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Model CO3000BN-User’s Manual Table of Contents Introduction Basic Safety InformationCover of Your CO Alarm HOW Your CO Alarm WorksGeneral Information LOW Battery Warning What the Lights and Alarm Tones MeanCO Alarm Specifications A Multi-level Home InstallationWhere to Install CO Alarms A Single-level HomeDo not locate this CO Alarm Where not to Install Your CO AlarmInstalling the 9V Battery HOW to Install Your CO AlarmTo Mount On The Wall For Tabletop UseIf the Alarm Signal Sounds If Your CO Alarm AlarmsFinding the Source of CO After an Alarm While the alarm is silenced If the CO Alarm Using the Silence FeatureThis means Weekly Testing Testing and MaintenanceTo keep the CO Alarm in good working order Regular MaintenanceChoosing a replacement battery Symptoms of CO Poisoning What is CO?What You Need To Know About CO Potential Sources Of CO In The Home How Can I Protect My Family? UL2034 Required Alarm Points What Levels of CO Cause an Alarm?Underwriters Laboratories Inc. UL2034 Problem This means You should Troubleshooting GuideGeneral Limitations Of CO Alarms Enterprise Court, Aurora, IL Limited Warranty

CO3000BN specifications

The BRK Electronic CO3000BN is a state-of-the-art carbon monoxide (CO) detector designed to enhance safety in residential and commercial environments. This sophisticated device incorporates a range of advanced technologies to ensure the highest level of protection against the dangers of carbon monoxide exposure.

One of the standout features of the CO3000BN is its electrochemical sensor, which is recognized as one of the most reliable sensor technologies available. This type of sensor is specifically engineered to detect low levels of carbon monoxide with exceptional accuracy, providing peace of mind to users. The device responds quickly to the presence of CO, alerting occupants immediately with a loud alarm, thus allowing for timely evacuation.

The CO3000BN is equipped with a digital display that provides real-time readings of carbon monoxide levels. This feature is incredibly beneficial as it allows users to monitor CO levels continuously, making it easier to identify potential hazards before they escalate. The display also features a low battery indicator, ensuring that users are always informed about the operational status of the unit.

In terms of installation, the CO3000BN is designed for easy mounting on walls or ceilings, providing flexibility for users to place the detector in the most strategic locations within their property. The device is powered by a 9-volt battery, ensuring it remains functional even during power outages, a crucial feature for maintaining safety in emergency situations.

The CO3000BN adheres to the highest safety standards and certifications, ensuring its reliability and effectiveness in detecting carbon monoxide. It also comes with a manufacturer’s warranty, reflecting the company’s confidence in the product’s durability and performance.

In summary, the BRK Electronic CO3000BN stand out with its advanced electrochemical sensor, digital display for real-time monitoring, easy installation, and reliable battery power. Combined with its adherence to safety standards, the CO3000BN is an essential device for anyone looking to enhance safety against the silent threat of carbon monoxide, making it an invaluable addition to any home or business.
Top Page Image Contents