R
Cumberland Gap
Wood Stove
BENDING TEMPLATE
STRAIGHT END
Baffle Diverter
is shipped
inside firebox.
Cut Ends
Hand Bend #1
Hand bend #2 
Straight End
Cut Ends
Lay the flat diverter on the template with the cut ends at the bottom of the tem- plate.
HAND BEND #1
Bend the diverter to match the same degree bend as in the template.
HAND BEND #2
Bend the diverter 90° to complete the process.
Place diverter on tem- plate to confirm the bends match the template.
WARNING
Risk of Fire.
Required on all rear horizontal installations.
Excessive smoke or flame spillage into the room may occur.
Page 18 |
CUT ENDS