R
Cumberland Gap Wood Stove
BAFFLE DIVERTER
REQUIRED ON ALL
HORIZONTAL INSTALLATIONS
1. Open both doors.
2. Hold the diverter in a vertical position with the straight edge going in first and then rotate it to the inside of the firebox as you slide the bent diverter over the ceramic blanket .
3. Place in position as shown in diagram below. The front edge of the diverter will rest on the front edge of the manifold chamber in a flush position. The back edge will butt up against the back slanted corner.
4. Repeat for other side.
Slanted corner
Ceramic Blanket
Straight end to the back
Cut end to the front
Manifold chamber
September 1, 2008 | Page 19 |