Hearth and Home Technologies Tucson (8700) owner manual Clearances from the pipe to combustibles

APPROVED VERTICAL

TERMINATION VENTING

CONFIGURATIONS WITH NO

ELBOWS OR (2) 45 0 OFFSETS,

FIGURE 14, AND (2) 900 ELBOWS,

FIGURE 15.

∙ 10' minimum system height (with or without offsets)

∙ 35' maximum system height

∙ 6' maximum offset (refer to Figure 14) ∙ 11' maximum offset (refer to Figure 15) The termination must fall within the

Outline shown in the Figures 14 & 15. Use the indicated restriction plate position. The Restriction Plate part # is 5950-922.

Figure 14: Vertical Terminations Using Straight

Pipe

Clearances from the pipe to combustibles:

1" to vertical runs

1" below and to the side of horizontal runs

2" from the top of horizontal runs

Figure 15: Vertical Termination Using (2) 90º

Elbows

22