Hearth and Home Technologies Tucson (8700) INSTALLER’S Information, Codes, Packing List

INSTALLER’S

INFORMATION

CODES

Adhere to all local codes or, in their absence, the latest edition of THE NATIONAL FUEL GAS CODE ANSI Z223.1 (NFPA 54) or CAN/CGA B149 Installation Code that can be obtained from:

AMERICAN NATIONAL STANDARDS

INSTITUTE, INC.

1430 BROADWAY

NEW YORK, NY 10018

OR

NATIONAL FIRE PROTECTION

ASSOCIATION, INC.

BATTERY MARCH PARK

QUINCY, MA 02269

The appliance when installed, must be electrically connected and grounded in accordance with local codes or, in the absence of local codes, with the current NFPA 70-National Electrical Code or CSA C22.1-Canadian Electric Code.

A manufactured home (mobile) OEM

installation must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (U.S.) or Standard for Manufactured Home Installation, ANSI/NCBCS A225.1 or Standard for Gas Equipped Recreational Vehicles and mobile Housing, CSA Z240.4.CAN/SCA Z240 MH (Canada). (Installer l’appareil selon les codes ou règlements locaux, ou, en l’absence de tels règlements, selon les Codes d’installation CAN/CGA-B149.)

ITEMS REQUIRED FOR

INSTALLATION

*External regulator (for propane/L.P.G. only)

*Piping which complies with local codes

*Pipe sealant approved for use with propane/L.P.G. (resistant to sulfur compounds)

*Manual shutoff valve

*Sediment trap

*Tee joint

*Pipe wrench

*Phillips head screwdriver

*Other parts as required by local code *Safety Glasses

*Gloves

PACKING LIST

1-Tucson Gas-Fired Heater

2-Decorative Ceramic Fiber Logs

2-Ember Screen

1-Charcoal Embers

1-Owner’s Manual

1-Thermostat

1-40’ Thermostat wire

1-L.P. Fuel Conversion Kit

1-Warranty Validation Form

1-Exhaust Restrictor Kit

Note: Vent kits are supplied separately. Failure to use the venting components suggested by HearthStone will void your warranty.