Hearth and Home Technologies Tucson (8700) Limited Lifetime Warranty, Limited FIVE-YEAR Warranty

Page 42

HearthStone Quality Home Heating Products Inc

TUCSON Gas-Fired Direct-Vent

HEARTHSTONE GAS-FIRED STOVE AND INSERT

LIMITED WARRANTIES

These warranties give you specific legal rights. You may also have other rights which vary from State to State.

HearthStone Quality Home Heating Products, Inc. (HearthStone) warrants to the original purchaser only (the “Original Purchaser”) the new gas-fired stove/insert manufactured by HearthStone and purchased by the Original Purchaser (referred to as the “Stove” for simplicity) against any of the occurrences listed in this document that result from defects in material or workmanship. All obligations of HearthStone under this document commence on the date the Original Purchaser purchases the Stove (the “Purchase Date”).

LIMITED LIFETIME WARRANTY

HearthStone warrants the following parts of the Stove against the following occurrences that result from defects in material and workmanship:

∙All cast iron parts, including the cast iron heat exchanger – against breakage, cracking or burn-through.

∙All stones – against cracking or breakage due to thermal stress, excluding surface and hairline cracks and scratches that do not affect the operation or safety of the Stove.

∙Glass – against breakage due to thermal shock.

LIMITED FIVE-YEAR WARRANTY

HearthStone warrants the following parts of the Stove against the following occurrences that result from defects in material and workmanship:

∙Firebox and firebox baffle – against breakage, cracking or burn-through.

∙Convective heat exchanger – against breakage, cracking or burn-through.

∙Burners, air shutters and orifices – against breakage, cracking or burn-through.

∙Ceramic logs and embers – against breakage, cracking or burn-through.

This warranty expires on the fifth (5th) anniversary of the Purchase Date.

LIMITED THREE-YEAR WARRANTY

HearthStone warrants the following parts of the Stove against the following occurrences that result from defects in material and workmanship:

∙Gas train, including gas valve, millivolt wiring, spill switch, pilot assembly, thermopile, thermocouple, piezo igniter, and, if the Stove is a vent-free model, ODS system – against breakage or malfunction.

This warranty expires on the third (3rd) anniversary of the Purchase Date.

LIMITED ONE-YEAR WARRANTY

HearthStone warrants the following parts of the Stove against the following occurrences that result from defects in material and workmanship:

∙Enamel Finish – against peeling or fading, excluding chipping, mechanical abrasion, chemical abrasion or crazing.

∙Gaskets and sealants – against breakage or deterioration.

∙Accessories and electrical components such as blowers, switches and thermo discs, excluding venting components, hearth components, electrical components and other components or accessories used in conjunction with the installation of the Stove not manufactured or supplied by HearthStone – against breakage or malfunction.

This warranty expires on the first (1st) anniversary of the Purchase Date.

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents What to do if YOU Smell GAS QUE Faire SI Vous Sentez UNE Odeur DE GAZTucson Model #8700 Information Sheet What WhenIntroduction Safety Information Must be Vented to Outside Service CautionFire Hazard HOT SurfacesCeramic Fiber LOG Safety Information Electrical HazardDo not Light Pilot or Main Burners by Hand Mobile Home Installations Specifications OWNER’S Information Routine Maintenance and CareCleaning Daily OperationFIREBOX, PILOT, & Burner Tubes Pilot Flame PatternClass Cleaning Replace the Front Door Gasket AS NeededCodes INSTALLER’S InformationItems Required for Installation Packing ListUnpacking and Inspection Hearth REQUIREMENT/FLOOR ProtectionClearance to Combustibles Minimum Venting-Mantle Clearance ToSnorkel-Wall Clearance To Combustibles Acceptable Direct-Vent Termination Cap locations Venting Information Venting ConnectionAdjustment to Restriction Plate Restriction PlateRestriction Plate Position Approved Venting System Components Venting Components ConfigurationAcceptable DIRECT-VENT Termination CAP Locations Chimney Liner SystemComponents For a Typical Snorkel Installation Clearances from the pipe to combustibles Approved Venting Configuration for Horizontal Termination 90 0 ElbowApproved Configuration for Fireplace Installation Co-Linear & Chimney as Air InletVenting KIT KIT #97-65001 Thermostat Wiring Remote ControlThermostat Placement Electrical ConnectionsWiring Diagram Tucson Wiring InstructionsGAS Supply Connections GAS ConnectionsGAS Supply LOG Placement Installation of the LOG SETRemoval of LOG SET Log SetSmoke and Fumes Warning BREAK-IN ProcedureLighting the Unit for the First Time BREAK-IN WarningPrepare for Lighting Initial AdjustmentsPilot Light Warning Variable Output ControlLighting Instructions AIR Shutter Adjustments To Turn OFF GAS to AppliancePilot Adjustment Burner Flame AppearanceFirebox Maintenance CareCleaning › Warning do not Clean the Unit When IT’S HOT Pilot & Burner FlamesCleaning the Glass Parts Lists › WarningTroubleshooting Troubleshooting Troubleshooting Limited THREE-YEAR Warranty Limited Lifetime WarrantyLimited FIVE-YEAR Warranty Limited ONE-YEAR WarrantyQualifying for Warranty Coverage ExclusionsWarranty Registration Remedy

Tucson (8700) specifications

Hearth and Home Technologies Tucson (8700) represents a significant advancement in the realm of home heating solutions. This gas fireplace model combines elegant design with cutting-edge technology, providing both aesthetic appeal and functional efficiency. The Tucson is designed to serve as a focal point in any living space while delivering warmth and comfort.

One of the main features of the Tucson (8700) is its sleek, modern design. Available in a variety of finishes, the fireplace fits seamlessly into a range of decor styles, from contemporary to traditional. Its large viewing area provides an unobstructed view of the flames, creating an inviting ambiance. The glass front is both stylish and functional, enhancing the overall appeal while maximizing heat output without compromising safety.

The Tucson is engineered with advanced technology that prioritizes efficiency and convenience. It utilizes a direct vent system, ensuring that the fireplace draws air from the outside and expels exhaust gases efficiently, improving indoor air quality. This feature allows for installations in a variety of locations within the home without the need for traditional chimney systems.

Another notable characteristic is its adjustable flame height and heat output. Homeowners can easily customize the warmth and ambiance to suit their preferences, providing versatile heating options for various occasions. The Tucson includes a remote control feature, allowing users to operate the fireplace without having to leave their comfortable seating area.

Safety is a key consideration in the design of the Tucson (8700). Equipped with an automatic shutoff feature, the fireplace will turn off if it detects any irregularities, ensuring peace of mind for users. The glass front remains cool to the touch, minimizing the risk of burns.

Additionally, the Tucson can be complemented with a variety of decorative options, including log sets and decorative media, allowing homeowners to create a personalized look that matches their style. This flexibility, along with its efficiency and stunning design, makes the Hearth and Home Technologies Tucson (8700) a standout choice for modern homes seeking both beauty and warmth.
Top Page Image Contents