Hearth and Home Technologies 4100I-GD-B, 4100I-NL-B warranty Advanced Combustion Technology ACT

Page 1

R

4100- I ACT WOOD INSERT

Advanced Combustion Technology (ACT)

Models:

4100I-GD-B

4100I-NL-B

Tested and

O-T L

Portland

Listed by

Oregon USA

C US

OMNI-Test Laboratories, Inc.

NOTICE

DO NOT DISCARD THIS MANUAL

Important operating

Read, understand and

Leave this manual with

and maintenance

follow these instructions

party responsible for

instructions included.

for safe installation and

use and operation.

 

operation.

 

DO DIS NOT C AR D

WARNING

If the information in these instructions is not followed exactly, a fire may result causing property damage, personal injury, or death.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Do not overfire - If heater or chimney connector glows, you are overfiring. Overfiring will void your warranty.

Comply with all minimum clearances to combustibles as specified. Failure to comply may cause house fire.

Installation and service of this appliance should be performed by qualified personnel. Hearth & Home Technologies recommends NFI certified professionals, or technicians supervised by an NFI certified professional.

WARNING

HOT SURFACES!

G l a s s a n d o t h e r surfaces are hot during operation AND cool down.

Hot glass will cause burns.

Do not touch glass until it is cooled

NEVER allow children to touch glass

Keep children away

CAREFULLY SUPERVISE children in the same room as appliance

Alert children and adults to hazards of high temperatures

High temperatures may ignite clothing or other flammable materials.

Keep clothing, furniture, draperies and other combustibles away.

WARNING

Fire Risk.

For use with solid wood fuel only.

Other fuels may overfire and generate poisonous gases (i.e. carbon monoxide).

1445 North Highway

 

www.quadrafire.com

Colville, WA 99114-2008

250-7201E September 1, 2008

Image 1
Contents Hot glass will cause burns Advanced Combustion Technology ACT007 Serial NumberModel Name Location Back side of left side panelTable of Contents Side View TOP ViewFront View Panel SizeSee Alternative Floor Protection Worksheet on SideWallRule A. These are safety requirements and are Installation recommendationsListings Chimney HEIGHT/DRAFTThermal Resistance R value Thermal Conductivity k valueConverting k to R Converting R to kOvalizing Round Stainless Steel Liners Chimney RequirementsFirestopping InsulationUSA only Installing Outside AirInstallation Into Masonry Fireplace Installation OptionsFactory-built zero clearance fireplace Installation Into a Factory Built Zero Clearance FireplaceAdjusting the Leveling Bolts Installation in CanadaLeveling Bolts and sheet metal shims Sheet Metal GuidesRe-install plate Outside AIR InstallationSecuring Liner to Chimney Ring Zero Clearance Fireplace Outside AIR Must be Turned to onPanel and Cast Trim must be ordered separately Panel SET and Cast Trim SETPanel and Gold Trim SET Completed ViewBlower Cord Location & Blower Control BOX with Switch Door Handle Assembly Zero Clearance Adjustable Trim SupportDoor Latch Adjustment Operation Burn Rates Operating TipsOpacity BTU / Hr Start-Up Air Control Primary ControlBurning Process Replace with 5mm ceramic glass only MaintenanceBaffle Removal & Installation Brick replacement instructionsCeramic Blanket Exploded ViewsDescription Service Parts and Accessories Part Description Alphabetical Order Date of Service Performed By Description of Service CONDITIONS, Exclusions & Limitation of Liability Hearth & Home Technologies Limited WarrantyHearth & Home Technologies Limited Warranty Cont’d Serial Number Date Purchased Date Installed Where PurchasedACT Wood Insert Telephone