Hearth and Home Technologies 4100I-GD-B SideWall, See Alternative Floor Protection Worksheet on

R

4100-I ACT WOOD INSERT

CLEARANCES TO COMBUSTIBLES

United States and Canada

	Maximum Mantel Depth - 10" (254mm)
		Mantel
SideWall	B	Fascia or Trim
		C
	A
		Insert	D
	F	E

Hearth Extension

Omni Report #061-S-40-2

		USA	CANADA
A	Sidewall to Stove	15" (381mm)	15" (381mm)
B	Mantel to Stove	26" (660mm)	23" (584mm)
C	Top Trim to Stove	20" (508mm)	20" (508mm)
D	Side Trim to Stove	6" (152mm)	6" (152mm)
E Hearth Extension from Glass		16" (406mm)	18" (457mm)
F	Hearth Extension from Side of Insert	8" (203mm)	8" (203mm)

Thermal protection USA & Canada Thermal protection must be 1/2 Inch (12.7mm) minimum

thickness ('k" value = 0.84) or equivalent material*

*Zero Clearance Installations USA Only

*See Alternative Floor Protection Worksheet on page 7.

In Canada a full length six inch (152mm) S635 flue liner required as per ULC S628.

NOTE: When installing into a masonry fireplace, the fire- place must be built to UBC Chapter 37 standards. Do not remove brick or mortar from masonry fireplace to accom- modate insert. The permanent metal warning plate provided must be attached to the back of the fireplace stating the fire- place may have been altered to accommodate the insert and must be returned to original condition for use as a conven- tional fireplace.

September 1, 2008 250-7201E Page