AMX ENV-VST-C Turning Off the Hvac System, Changing the Fan Mode, Heating/Cooling Mode Options

Page 26

Setup and Configuration

The Heating/Cooling Mode options enable you to toggle the HVAC system setting between heating and cooling. The change takes effect when you press Mode/Select or after a 10-second timeout.

Heating/Cooling Mode Options

Emergency

Toggles the emergency heat setting between On and Off. This option is only available on Heat Pump

 

systems.

 

 

Auto

Runs the heating or cooling systems when the heating and cooling settings determine it should do so.

 

Pressing either of the navigational buttons causes the most recently used setpoint to start blinking. While

 

the setpoint is blinking, you can use the navigational buttons to increase or decrease the setpoint. Pressing

 

Mode/Select while either setpoint is blinking causes the current setpoint to stop blinking and the other

 

setpoint to start blinking. After a timeout of 10 seconds the setpoint stops blinking.

 

 

Off

Turns off the HVAC system. The heat and cool setpoints do not appear on the Main screen in Off mode.

 

 

Heat

Activates the heating system using the heat setpoint. Pressing either of the navigational buttons while on

 

the Main screen causes the heat setpoint to start blinking. While the setpoint is blinking, you can use the

 

navigational buttons to increase or decrease the heat setpoint. After a timeout of 10 seconds the setpoint

 

stops blinking.

 

 

Cool

Activates the cooling system using the cool setpoint. Pressing either of the navigational buttons while on

 

the Main screen causes the cool setpoint to start blinking. While the setpoint is blinking, you can use the

 

navigational buttons to increase or decrease the cool setpoint. After a timeout of 10 seconds the setpoint

 

stops blinking.

 

 

Perform these steps to change the heating/cooling mode:

1.On the Main screen, hold Mode/Select for three seconds. The heating/cooling menu appears.

2.Use the navigational buttons to select the option you want.

3.Press Mode/Select to activate the selected mode.

Do not use air conditioning when the outdoor temperature is below 50° F (10° C).

Turning Off the HVAC System

Perform the following steps to turn off the HVAC system:

1.On the Main screen, hold Mode/Select for three seconds. The Hold Mode menu appears.

2.Press Mode/Select to open to the Heating/Cooling mode menu.

3.Use the navigation buttons to select Off, and press Mode/Select to turn the HVAC system off. The Fan Mode settings appear, but you do not need to change them. The settings disappear after a 10-second timeout.

Changing the Fan Mode

You can access Fan mode by pressing Mode/Select two times after accessing Hold mode. You can use the navigational buttons to scroll through the list. You can also change the Fan mode on the Settings screen.

FIG. 21 Fan Mode menu

20

ENV-VST-C - Operation / Reference Guide

Page 25 Page 27
Image 26
Page 25 Page 27
Contents ENV-VST-C AMX Limited Warranty and Disclaimer Table of Contents Advanced Thermostat Operations Programming AxLink Channels AxLink Levels Weather Duet Module System Components ViewStat Color Thermostat SpecificationsOverview ENV-VST-TSO Outdoor Temperature Sensor Specifications Communication and HvacSelecting the Thermostat Location Disconnecting Power to All Hvac EquipmentRemote Temperature Sensors Stand-Alone Thermostat Mounting CriteriaMounting the Base to a Wall Wiring the ThermostatRemoving the Faceplate from the Base Communication and Equipment Terminal Wiring Definitions Wiring TerminalsCommunication and Equipment Terminal Wiring Definitions Wiring for AxLink Preparing Captive WiresWiring Guidelines Wiring Diagrams Single Stage Furnace and Single Stage A/CDual Stage Furnace and Dual Stage A/C wiring Dual Stage Furnace and Dual Stage A/CRoof Top Unit with Dual Stage Heat and Dual Stage Cool Boiler and A/C with Separate Transformers wiring Boiler and A/C with Separate TransformersSingle Stage Heat Pump wiring Single Stage Heat PumpTwo Stage Heat Pump wiring Two Stage Heat PumpInstallation and Wiring Installing a Remote Sensor Installing the Outdoor Temperature SensorInstalling the Indoor Flush Mount Sensor Indoor Flush Mount Temperature Sensor SpecificationsSensor wire connected to cable Front Panel Components Navigating the ViewStat Color Communicating ThermostatChanging the Heating and Cooling Setpoints Main Screen Status IconsHold Mode Options Changing Hold ModeChanging the Heating/Cooling Mode To ProgramTurning Off the Hvac System Changing the Fan ModeHeating/Cooling Mode Options Stops blinkingFan Auto Fan Mode OptionsHelp Screen Or coolingCurrent Weather Screen Day Forecast ScreenExit Returns to the Main screen Thermostat Mode ScreenThermostat Mode Screen Options Program Screen Options Establishing Daytime/Nighttime Temperature SettingsProgram Screen Copying Programmed Settings Copy To screenAway Mode Screen Options Away Mode ScreenEstablishing Away Mode Settings Settings Screen Options Settings ScreenChanging the Fan Settings Changing the Filter Settings Security Code Screen Accessing Advanced Setup OptionsChanging User Preferences Entering the Security Code Change Security Code ScreenChanging the Security Code User Preferences Screen User Preferences Screen OptionsChanging the Temperature Scale Changing the Date and Time FormatChanging the Backlight Settings Disabling the Filter Change ReminderDisabling the Screen Saver Disabling the Weather Alert IconDisabling the Forecast Screens Button Lockout Screen Button Lockout Screen OptionsLocking the Temperature Settings Locking the ButtonsLocking the Fan Settings Locking the Mode SettingsAdvanced Setup Screen Advanced Setup Screen OptionsWhen Diagnostic Mode is active Changing the Type of Hvac SystemChanging the Type of Fossil Fuel Activating the External SensorActivating the On-board Humidity Sensor Setting the Date and Time on the ThermostatActivating the Internal On-board Sensor Turning on Diagnostic Mode Advanced Setup screen 2Turning on Comfort Recovery Turning on the Humidification and Dehumidification SystemsAxLink Communications Screen AxLink Communications screenSwitching AxLink Devices Thermostat Setup Screen Options Thermostat SetupThermostat Setup Screen Setting First and Second Stage Differentials Setting the Deadband Temperature DifferenceSetting the Temperature Offset Setting the Balance Point for a Heat Pump SystemThermostat Setup screen 2 SENDCOMMANDs SENDCOMMANDsDay Forecast Commands Color ViewStat Thermostat CommandsDay Forecast Commands Weather Condition KeywordsAxLink Commands AxLink CommandsDew Point 55F Temperature scaleDisplays the current forecast To Off, the response reports OFFSendcommand ’LK MR1 TR3’ Sets the mode to Program Master requesting the thermostat’s serial number Sets the current barometric pressureRequest the thermostat’s serial number Thermostat returns the serial numberAxLink Channels AxLink ChannelsHeat 224 219Hvac State Emergency 2nd stage heat relay Provides feedback from relay W2 246AxLink Levels AxLink LevelsWeather Duet Module Weather Setup Pages InConcert windowChanging the Date and Time Weather MainChanging the Humidity Settings Changing the Humidity ModeChanging the Heat and Cool Settings Humidity menuChanging the Hvac Mode Hvac Mode menuChanging the Hold Mode Entering Location by Zip CodeChanging Wind Speed Units Changing Temperature UnitsEntering Location by Station ID Changing Pressure UnitsDay Forecast screen Programming ENV-VST-C Operation / Reference Guide Increase Your Revenue through education + knowledge
Related manuals
Manual 2 pages 4.04 Kb

ENV-VST-C specifications

The AMX ENV-VST-C is an advanced video streaming and encoding solution designed to meet the needs of modern broadcasting and professional video applications. Known for its high-performance capabilities and seamless integration into existing systems, the ENV-VST-C stands as a reliable choice for content creators, broadcasters, and businesses alike.

One of the main features of the AMX ENV-VST-C is its ability to support a wide range of video formats and resolutions. The device is capable of encoding and streaming in 4K, Full HD, and SD resolutions, ensuring that users can produce high-quality content regardless of their specific requirements. This versatility makes it suitable for various applications, including live event streaming, corporate communications, and even online educational platforms.

The ENV-VST-C utilizes state-of-the-art encoding technologies, such as H.264 and H.265, providing users with high-quality video while optimizing bandwidth usage. H.265, in particular, allows for significantly smaller file sizes compared to H.264, all without sacrificing video quality. This efficiency is crucial for users looking to reduce costs associated with bandwidth and storage, especially in environments where video distribution is critical.

Another key characteristic of this encoder is its user-friendly interface. The AMX ENV-VST-C features an intuitive control panel and web interface that allows users to configure settings, monitor performance, and manage live streams effortlessly. This ease of use is essential for operators who may not have in-depth technical knowledge but need to manage complex streaming tasks efficiently.

In addition, the AMX ENV-VST-C supports multiple streaming protocols, including RTMP, RTSP, and MPEG-TS. This capability enables seamless integration with various content delivery networks (CDNs) and ensures that users can reach their audience effectively across different platforms.

Moreover, the device is designed with reliability in mind. It offers features such as redundant power supplies and advanced cooling systems, which help maintain optimal performance even in demanding environments. This reliability is crucial for live streaming applications, where any downtime can result in significant loss of engagement and revenue.

In conclusion, the AMX ENV-VST-C stands out with its robust feature set, cutting-edge technologies, and user-centric design. Whether you are in broadcasting, corporate communication, or education, this encoder provides the performance and flexibility needed to deliver exceptional video content. With its commitment to quality and efficiency, the AMX ENV-VST-C is a valuable asset for anyone looking to enhance their video production capabilities.
Top Page Image Contents