AMX ENV-VST-C manual ENV-VST-TSO Outdoor Temperature Sensor Specifications, Communication and Hvac

Page 8

ENV-VST-C ViewStat Color Communicating Thermostat

ViewStat Color Thermostat Specifications (Cont.)

Control Accuracy

±1.0° F (± 0.56° C)

 

±3% relative humidity

 

 

 

Operating Range

•

Temperature: 40°-99° F (5°-37° C)

 

• Humidity: 5%-95% RH non-condensing

 

 

 

Certifications

•

IC

 

•

FCC Class B

 

•

CE

 

•

IEC60950

Front Panel Components:

Main LCD display

3.5" (8.89 cm) color QVGA (320 x 240) Thin Film Transistor Liquid Crystal Display (TFT-

 

LCD). The main display provides the mode status, temperature, and system status

 

information.

 

 

Navigation buttons

The Navigation buttons are used to change various parameters on the thermostat,

 

including the temperature setpoints. These buttons are located beneath the display.

 

 

Mode/Select button

The Mode/Select button is used to navigate through the various thermostat screens,

 

including the weather screens. This button is located beneath the display.

 

 

Circuit Board Components:

 

 

 

Communication and HVAC

Terminals with captive-wire connectors that connects to the thermostat, HVAC equipment,

Equipment connectors

control system, remote sensors, and power supply. See the Communication and

 

Equipment Terminal Wiring Definitions section on page 5 for more information.

 

 

Enclosure:

 

 

 

Material

White plastic and removable front panel. The panel can be painted to match wall decor.

 

Warning: If you paint the panel, do not paint over the exposed thermistor. Doing so can

 

cause the external temperature sensor to work improperly.

 

 

Dimensions (HWD)

5.31" x 3.93" x 1.18" (13.48 cm x 9.98 cm x 2.99 cm)

 

 

Weight

5.29 oz. (150 grams)

 

 

Included Accessories

ENV-VST-C ViewStat Color Communicating Thermostat Installation Guide (93-2050-01)

 

ENV-VST-TSO ViewStat Indoor/Outdoor Temperature sensor (FG2050-22)

 

Duet i!-Weather application (FG070-518), three-year subscription

 

 

Optional Accessories

ENV-VST-TSF ViewStat Indoor Flush Mount Temperature Sensor (FG2050-21)

 

 

The following table lists the specifications for the ENV-VST-TSO Outdoor Temperature Sensor:

ENV-VST-TSO Outdoor Temperature Sensor Specifications

Sensing Element:

Thermistor (thermal resistor)

 

 

Accuracy:

±0.6° C from -20° to 60° C (-4° F to 140° F)

 

 

Operating Temperature Range:

-50° C to 110° C (-58° F to 230° F)

 

 

Temperature Response:

NTC Thermistor

 

 

Connection:

1" (2 1/2 cm) 24 AWG pigtails

 

 

Mounting:

Surface mount or 1/4" hole

 

 

Color:

White plastic case

 

 

Threaded Case Length:

1 3/16 in. (30 mm)

 

 

Threaded Case Diameter:

1/4 in. (7 mm)

 

 

Sensor Face Diameter:

1/4 in. (7 mm)

 

 

Sensor Face Thickness:

1/13 in. (2 mm)

 

 

Weight:

0.88 oz. (29.94 g)

 

 

2

ENV-VST-C - Operation / Reference Guide

Page 7 Page 9
Image 8
Page 7 Page 9
Contents ENV-VST-C AMX Limited Warranty and Disclaimer Table of Contents Advanced Thermostat Operations Programming AxLink Channels AxLink Levels Weather Duet Module System Components ViewStat Color Thermostat SpecificationsOverview ENV-VST-TSO Outdoor Temperature Sensor Specifications Communication and HvacDisconnecting Power to All Hvac Equipment Remote Temperature SensorsSelecting the Thermostat Location Stand-Alone Thermostat Mounting CriteriaMounting the Base to a Wall Wiring the ThermostatRemoving the Faceplate from the Base Communication and Equipment Terminal Wiring Definitions Wiring TerminalsCommunication and Equipment Terminal Wiring Definitions Wiring for AxLink Preparing Captive WiresWiring Guidelines Wiring Diagrams Single Stage Furnace and Single Stage A/CDual Stage Furnace and Dual Stage A/C wiring Dual Stage Furnace and Dual Stage A/CRoof Top Unit with Dual Stage Heat and Dual Stage Cool Boiler and A/C with Separate Transformers wiring Boiler and A/C with Separate TransformersSingle Stage Heat Pump wiring Single Stage Heat PumpTwo Stage Heat Pump wiring Two Stage Heat PumpInstallation and Wiring Installing a Remote Sensor Installing the Outdoor Temperature SensorInstalling the Indoor Flush Mount Sensor Indoor Flush Mount Temperature Sensor SpecificationsSensor wire connected to cable Front Panel Components Navigating the ViewStat Color Communicating ThermostatChanging the Heating and Cooling Setpoints Main Screen Status IconsChanging Hold Mode Changing the Heating/Cooling ModeHold Mode Options To ProgramChanging the Fan Mode Heating/Cooling Mode OptionsTurning Off the Hvac System Stops blinkingFan Mode Options Help ScreenFan Auto Or coolingCurrent Weather Screen Day Forecast ScreenExit Returns to the Main screen Thermostat Mode ScreenThermostat Mode Screen Options Program Screen Options Establishing Daytime/Nighttime Temperature SettingsProgram Screen Copying Programmed Settings Copy To screenAway Mode Screen Options Away Mode ScreenEstablishing Away Mode Settings Settings Screen Options Settings ScreenChanging the Fan Settings Changing the Filter Settings Security Code Screen Accessing Advanced Setup OptionsChanging User Preferences Entering the Security Code Change Security Code ScreenChanging the Security Code User Preferences Screen User Preferences Screen OptionsChanging the Temperature Scale Changing the Date and Time FormatChanging the Backlight Settings Disabling the Filter Change ReminderDisabling the Screen Saver Disabling the Weather Alert IconDisabling the Forecast Screens Button Lockout Screen Button Lockout Screen OptionsLocking the Temperature Settings Locking the ButtonsLocking the Fan Settings Locking the Mode SettingsAdvanced Setup Screen Advanced Setup Screen OptionsWhen Diagnostic Mode is active Changing the Type of Hvac SystemChanging the Type of Fossil Fuel Activating the External SensorActivating the On-board Humidity Sensor Setting the Date and Time on the ThermostatActivating the Internal On-board Sensor Turning on Diagnostic Mode Advanced Setup screen 2Turning on Comfort Recovery Turning on the Humidification and Dehumidification SystemsAxLink Communications Screen AxLink Communications screenSwitching AxLink Devices Thermostat Setup Screen Options Thermostat SetupThermostat Setup Screen Setting First and Second Stage Differentials Setting the Deadband Temperature DifferenceSetting the Temperature Offset Setting the Balance Point for a Heat Pump SystemThermostat Setup screen 2 SENDCOMMANDs SENDCOMMANDsColor ViewStat Thermostat Commands Day Forecast CommandsDay Forecast Commands Weather Condition KeywordsAxLink Commands AxLink CommandsTemperature scale Displays the current forecastDew Point 55F To Off, the response reports OFFSendcommand ’LK MR1 TR3’ Sets the mode to Program Sets the current barometric pressure Request the thermostat’s serial numberMaster requesting the thermostat’s serial number Thermostat returns the serial numberAxLink Channels AxLink Channels219 Hvac State EmergencyHeat 224 2nd stage heat relay Provides feedback from relay W2 246AxLink Levels AxLink LevelsWeather Duet Module Weather Setup Pages InConcert windowChanging the Date and Time Weather MainChanging the Humidity Settings Changing the Humidity ModeChanging the Heat and Cool Settings Humidity menuChanging the Hvac Mode Hvac Mode menuChanging the Hold Mode Entering Location by Zip CodeChanging Temperature Units Entering Location by Station IDChanging Wind Speed Units Changing Pressure UnitsDay Forecast screen Programming ENV-VST-C Operation / Reference Guide Increase Your Revenue through education + knowledge
Related manuals
Manual 2 pages 4.04 Kb

ENV-VST-C specifications

The AMX ENV-VST-C is an advanced video streaming and encoding solution designed to meet the needs of modern broadcasting and professional video applications. Known for its high-performance capabilities and seamless integration into existing systems, the ENV-VST-C stands as a reliable choice for content creators, broadcasters, and businesses alike.

One of the main features of the AMX ENV-VST-C is its ability to support a wide range of video formats and resolutions. The device is capable of encoding and streaming in 4K, Full HD, and SD resolutions, ensuring that users can produce high-quality content regardless of their specific requirements. This versatility makes it suitable for various applications, including live event streaming, corporate communications, and even online educational platforms.

The ENV-VST-C utilizes state-of-the-art encoding technologies, such as H.264 and H.265, providing users with high-quality video while optimizing bandwidth usage. H.265, in particular, allows for significantly smaller file sizes compared to H.264, all without sacrificing video quality. This efficiency is crucial for users looking to reduce costs associated with bandwidth and storage, especially in environments where video distribution is critical.

Another key characteristic of this encoder is its user-friendly interface. The AMX ENV-VST-C features an intuitive control panel and web interface that allows users to configure settings, monitor performance, and manage live streams effortlessly. This ease of use is essential for operators who may not have in-depth technical knowledge but need to manage complex streaming tasks efficiently.

In addition, the AMX ENV-VST-C supports multiple streaming protocols, including RTMP, RTSP, and MPEG-TS. This capability enables seamless integration with various content delivery networks (CDNs) and ensures that users can reach their audience effectively across different platforms.

Moreover, the device is designed with reliability in mind. It offers features such as redundant power supplies and advanced cooling systems, which help maintain optimal performance even in demanding environments. This reliability is crucial for live streaming applications, where any downtime can result in significant loss of engagement and revenue.

In conclusion, the AMX ENV-VST-C stands out with its robust feature set, cutting-edge technologies, and user-centric design. Whether you are in broadcasting, corporate communication, or education, this encoder provides the performance and flexibility needed to deliver exceptional video content. With its commitment to quality and efficiency, the AMX ENV-VST-C is a valuable asset for anyone looking to enhance their video production capabilities.
Top Page Image Contents