AMX ENV-VST-C manual Sets the current barometric pressure, Request the thermostat’s serial number

Page 63

Programming

AxLink Commands (Cont.)

PRESSURE

Sets the current barometric pressure.

 

Syntax:

 

SEND_COMMAND ’PRESSURE <VAL>’

 

Variable:

 

VAL = The barometric pressure. This value should correspond to the currently used unit of measure.

 

Examples:

 

SEND_COMMAND ’PRESSURE 29.85’

?SERIAL

Retrieves the 16-byte serial number set on the thermostat. The Master sends the ?SERIAL command to

 

request the thermostat’s serial number.

 

Syntax:

 

?SERIAL

 

Example:

 

SEND_COMMAND ’?SERIAL’

 

The Master requesting the thermostat’s serial number.

 

SEND_COMMAND ’SERIAL 1234567890123456’

 

The thermostat returns the serial number 1234567890123456.

 

 

SP

Sets or changes the humidify and dehumidify set points.

 

Syntax:

 

SP H<HSP> D<DSP>

 

Variable:

 

HSP = The new humidify setpoint with a range of 0 to 100.

 

DSP = The new dehumidify setpoint with a range of 0 to 100.

 

Example:

 

SEND_COMMAND ’SP H75 D20’

 

Sets the humidify setpoint to 75% and the dehumidify setpoint to 20% RH.

 

 

ST

Queries for the thermostat system configuration. When received the thermostat reports its configured

 

humidify and dehumidify set points, thermostat mode, and temperature scale.

 

Syntax:

 

SEND_COMMAND ’ST’

 

Example:

 

SEND_COMMAND 'ST'

 

Master requests device status.

 

SEND_COMMAND 'SP H30 D50'

 

SEND_COMMAND 'MD MP'

 

SEND_COMMAND 'FM SF'

 

Device responds with humidify set point 30, dehumidify set point 50, mode program, and temperature

 

scale Fahrenheit.

 

 

ENV-VST-C - Operation / Reference Guide

57

 

 

Page 62 Page 64
Image 63
Page 62 Page 64
Contents ENV-VST-C AMX Limited Warranty and Disclaimer Table of Contents Advanced Thermostat Operations Programming AxLink Channels AxLink Levels Weather Duet Module ViewStat Color Thermostat Specifications OverviewSystem Components Communication and Hvac ENV-VST-TSO Outdoor Temperature Sensor SpecificationsStand-Alone Thermostat Mounting Criteria Disconnecting Power to All Hvac EquipmentRemote Temperature Sensors Selecting the Thermostat LocationWiring the Thermostat Removing the Faceplate from the BaseMounting the Base to a Wall Wiring Terminals Communication and Equipment Terminal Wiring DefinitionsCommunication and Equipment Terminal Wiring Definitions Preparing Captive Wires Wiring GuidelinesWiring for AxLink Single Stage Furnace and Single Stage A/C Wiring DiagramsDual Stage Furnace and Dual Stage A/C Dual Stage Furnace and Dual Stage A/C wiringRoof Top Unit with Dual Stage Heat and Dual Stage Cool Boiler and A/C with Separate Transformers Boiler and A/C with Separate Transformers wiringSingle Stage Heat Pump Single Stage Heat Pump wiringTwo Stage Heat Pump Two Stage Heat Pump wiringInstallation and Wiring Installing the Outdoor Temperature Sensor Installing a Remote SensorIndoor Flush Mount Temperature Sensor Specifications Installing the Indoor Flush Mount SensorSensor wire connected to cable Navigating the ViewStat Color Communicating Thermostat Front Panel ComponentsMain Screen Status Icons Changing the Heating and Cooling SetpointsTo Program Changing Hold ModeChanging the Heating/Cooling Mode Hold Mode OptionsStops blinking Changing the Fan ModeHeating/Cooling Mode Options Turning Off the Hvac SystemOr cooling Fan Mode OptionsHelp Screen Fan AutoDay Forecast Screen Current Weather ScreenThermostat Mode Screen Thermostat Mode Screen OptionsExit Returns to the Main screen Establishing Daytime/Nighttime Temperature Settings Program ScreenProgram Screen Options Copy To screen Copying Programmed SettingsAway Mode Screen Establishing Away Mode SettingsAway Mode Screen Options Settings Screen Changing the Fan SettingsSettings Screen Options Changing the Filter Settings Accessing Advanced Setup Options Changing User PreferencesSecurity Code Screen Change Security Code Screen Entering the Security CodeChanging the Security Code User Preferences Screen Options User Preferences ScreenChanging the Date and Time Format Changing the Temperature ScaleDisabling the Filter Change Reminder Changing the Backlight SettingsDisabling the Weather Alert Icon Disabling the Forecast ScreensDisabling the Screen Saver Button Lockout Screen Options Button Lockout ScreenLocking the Buttons Locking the Temperature SettingsLocking the Mode Settings Locking the Fan SettingsAdvanced Setup Screen Options Advanced Setup ScreenChanging the Type of Hvac System When Diagnostic Mode is activeActivating the External Sensor Changing the Type of Fossil FuelSetting the Date and Time on the Thermostat Activating the Internal On-board SensorActivating the On-board Humidity Sensor Advanced Setup screen 2 Turning on Diagnostic ModeTurning on the Humidification and Dehumidification Systems Turning on Comfort RecoveryAxLink Communications screen AxLink Communications ScreenSwitching AxLink Devices Thermostat Setup Thermostat Setup ScreenThermostat Setup Screen Options Setting the Deadband Temperature Difference Setting First and Second Stage DifferentialsSetting the Balance Point for a Heat Pump System Setting the Temperature OffsetThermostat Setup screen 2 SENDCOMMANDs SENDCOMMANDsWeather Condition Keywords Color ViewStat Thermostat CommandsDay Forecast Commands Day Forecast CommandsAxLink Commands AxLink CommandsTo Off, the response reports OFF Temperature scaleDisplays the current forecast Dew Point 55FSendcommand ’LK MR1 TR3’ Sets the mode to Program Thermostat returns the serial number Sets the current barometric pressureRequest the thermostat’s serial number Master requesting the thermostat’s serial numberAxLink Channels AxLink Channels2nd stage heat relay Provides feedback from relay W2 246 219Hvac State Emergency Heat 224AxLink Levels Weather Duet ModuleAxLink Levels InConcert window Weather Setup PagesWeather Main Changing the Date and TimeChanging the Humidity Mode Changing the Humidity SettingsHumidity menu Changing the Heat and Cool SettingsHvac Mode menu Changing the Hvac ModeEntering Location by Zip Code Changing the Hold ModeChanging Pressure Units Changing Temperature UnitsEntering Location by Station ID Changing Wind Speed UnitsDay Forecast screen Programming ENV-VST-C Operation / Reference Guide Increase Your Revenue through education + knowledge
Related manuals
Manual 2 pages 4.04 Kb

ENV-VST-C specifications

The AMX ENV-VST-C is an advanced video streaming and encoding solution designed to meet the needs of modern broadcasting and professional video applications. Known for its high-performance capabilities and seamless integration into existing systems, the ENV-VST-C stands as a reliable choice for content creators, broadcasters, and businesses alike.

One of the main features of the AMX ENV-VST-C is its ability to support a wide range of video formats and resolutions. The device is capable of encoding and streaming in 4K, Full HD, and SD resolutions, ensuring that users can produce high-quality content regardless of their specific requirements. This versatility makes it suitable for various applications, including live event streaming, corporate communications, and even online educational platforms.

The ENV-VST-C utilizes state-of-the-art encoding technologies, such as H.264 and H.265, providing users with high-quality video while optimizing bandwidth usage. H.265, in particular, allows for significantly smaller file sizes compared to H.264, all without sacrificing video quality. This efficiency is crucial for users looking to reduce costs associated with bandwidth and storage, especially in environments where video distribution is critical.

Another key characteristic of this encoder is its user-friendly interface. The AMX ENV-VST-C features an intuitive control panel and web interface that allows users to configure settings, monitor performance, and manage live streams effortlessly. This ease of use is essential for operators who may not have in-depth technical knowledge but need to manage complex streaming tasks efficiently.

In addition, the AMX ENV-VST-C supports multiple streaming protocols, including RTMP, RTSP, and MPEG-TS. This capability enables seamless integration with various content delivery networks (CDNs) and ensures that users can reach their audience effectively across different platforms.

Moreover, the device is designed with reliability in mind. It offers features such as redundant power supplies and advanced cooling systems, which help maintain optimal performance even in demanding environments. This reliability is crucial for live streaming applications, where any downtime can result in significant loss of engagement and revenue.

In conclusion, the AMX ENV-VST-C stands out with its robust feature set, cutting-edge technologies, and user-centric design. Whether you are in broadcasting, corporate communication, or education, this encoder provides the performance and flexibility needed to deliver exceptional video content. With its commitment to quality and efficiency, the AMX ENV-VST-C is a valuable asset for anyone looking to enhance their video production capabilities.
Top Page Image Contents