AMX ENV-VST-C manual Switching AxLink Devices

Page 52

Advanced Thermostat Operations

Switching AxLink Devices

The AxLink Communications screen enables you to set the address of the AxLink device with which you want the thermostat to communicate. The AxLink address distinguishes a device on the AxLink bus from all other devices. Valid AxLink addresses are 1-255. Address 0 belongs to the Master. The default setting for the ViewStat Color Communicating Thermostat is 1. Perform the following steps to switch AxLink devices:

1.From the Main screen, press Mode/Select to access the Thermostat Mode screen.

2.Use the navigation buttons to select Settings, and press Mode/Select. The Settings screen appears.

3.Use the navigation buttons to select Advanced Settings. Press Mode/Select to access the Security Code screen.

4.Enter the security code, and select Enter to access the User Preferences screen. See the Entering the Security Code on page 30 for more information.

5.Use the navigation buttons to highlight More, and press Mode/Select to access the second User Preferences screen.

6.On the second User Preferences screen, use the navigation buttons to highlight More, and press Mode/Select to access the third User Preferences screen.

7.Use the navigation buttons to highlight Advanced Setup, and press Mode/Select to access the Advanced Setup screen.

8.Use the navigation buttons to highlight More, and press Mode/Select to access the second Advanced Setup screen.

9.Use the navigation buttons to highlight AxLink Setup, and press Mode/Select to access the AxLink Communications screen (FIG. 47).

FIG. 47 AxLink Communications screen

10.Use the navigation buttons to scroll through the numbers until you reach the first digit in the code, and press Mode/ Select to move to the next digit in the code.

11.Repeat the previous step until you have entered the full three-digit code.

12.Press Mode/Select while Enter is selected.

Changing the address of an AxLink device can result in some features on the thermostat to stop working.

46

ENV-VST-C - Operation / Reference Guide

Page 51 Page 53
Image 52
Page 51 Page 53
Contents ENV-VST-C AMX Limited Warranty and Disclaimer Table of Contents Advanced Thermostat Operations Programming AxLink Channels AxLink Levels Weather Duet Module Overview ViewStat Color Thermostat SpecificationsSystem Components ENV-VST-TSO Outdoor Temperature Sensor Specifications Communication and HvacDisconnecting Power to All Hvac Equipment Remote Temperature SensorsSelecting the Thermostat Location Stand-Alone Thermostat Mounting CriteriaRemoving the Faceplate from the Base Wiring the ThermostatMounting the Base to a Wall Communication and Equipment Terminal Wiring Definitions Wiring TerminalsCommunication and Equipment Terminal Wiring Definitions Wiring Guidelines Preparing Captive WiresWiring for AxLink Wiring Diagrams Single Stage Furnace and Single Stage A/CDual Stage Furnace and Dual Stage A/C wiring Dual Stage Furnace and Dual Stage A/CRoof Top Unit with Dual Stage Heat and Dual Stage Cool Boiler and A/C with Separate Transformers wiring Boiler and A/C with Separate TransformersSingle Stage Heat Pump wiring Single Stage Heat PumpTwo Stage Heat Pump wiring Two Stage Heat PumpInstallation and Wiring Installing a Remote Sensor Installing the Outdoor Temperature SensorInstalling the Indoor Flush Mount Sensor Indoor Flush Mount Temperature Sensor SpecificationsSensor wire connected to cable Front Panel Components Navigating the ViewStat Color Communicating ThermostatChanging the Heating and Cooling Setpoints Main Screen Status IconsChanging Hold Mode Changing the Heating/Cooling ModeHold Mode Options To ProgramChanging the Fan Mode Heating/Cooling Mode OptionsTurning Off the Hvac System Stops blinkingFan Mode Options Help ScreenFan Auto Or coolingCurrent Weather Screen Day Forecast ScreenThermostat Mode Screen Options Thermostat Mode ScreenExit Returns to the Main screen Program Screen Establishing Daytime/Nighttime Temperature SettingsProgram Screen Options Copying Programmed Settings Copy To screenEstablishing Away Mode Settings Away Mode ScreenAway Mode Screen Options Changing the Fan Settings Settings ScreenSettings Screen Options Changing the Filter Settings Changing User Preferences Accessing Advanced Setup OptionsSecurity Code Screen Entering the Security Code Change Security Code ScreenChanging the Security Code User Preferences Screen User Preferences Screen OptionsChanging the Temperature Scale Changing the Date and Time FormatChanging the Backlight Settings Disabling the Filter Change ReminderDisabling the Forecast Screens Disabling the Weather Alert IconDisabling the Screen Saver Button Lockout Screen Button Lockout Screen OptionsLocking the Temperature Settings Locking the ButtonsLocking the Fan Settings Locking the Mode SettingsAdvanced Setup Screen Advanced Setup Screen OptionsWhen Diagnostic Mode is active Changing the Type of Hvac SystemChanging the Type of Fossil Fuel Activating the External SensorActivating the Internal On-board Sensor Setting the Date and Time on the ThermostatActivating the On-board Humidity Sensor Turning on Diagnostic Mode Advanced Setup screen 2Turning on Comfort Recovery Turning on the Humidification and Dehumidification SystemsAxLink Communications Screen AxLink Communications screenSwitching AxLink Devices Thermostat Setup Screen Thermostat SetupThermostat Setup Screen Options Setting First and Second Stage Differentials Setting the Deadband Temperature DifferenceSetting the Temperature Offset Setting the Balance Point for a Heat Pump SystemThermostat Setup screen 2 SENDCOMMANDs SENDCOMMANDsColor ViewStat Thermostat Commands Day Forecast CommandsDay Forecast Commands Weather Condition KeywordsAxLink Commands AxLink CommandsTemperature scale Displays the current forecastDew Point 55F To Off, the response reports OFFSendcommand ’LK MR1 TR3’ Sets the mode to Program Sets the current barometric pressure Request the thermostat’s serial numberMaster requesting the thermostat’s serial number Thermostat returns the serial numberAxLink Channels AxLink Channels219 Hvac State EmergencyHeat 224 2nd stage heat relay Provides feedback from relay W2 246Weather Duet Module AxLink LevelsAxLink Levels Weather Setup Pages InConcert windowChanging the Date and Time Weather MainChanging the Humidity Settings Changing the Humidity ModeChanging the Heat and Cool Settings Humidity menuChanging the Hvac Mode Hvac Mode menuChanging the Hold Mode Entering Location by Zip CodeChanging Temperature Units Entering Location by Station IDChanging Wind Speed Units Changing Pressure UnitsDay Forecast screen Programming ENV-VST-C Operation / Reference Guide Increase Your Revenue through education + knowledge
Related manuals
Manual 2 pages 4.04 Kb

ENV-VST-C specifications

The AMX ENV-VST-C is an advanced video streaming and encoding solution designed to meet the needs of modern broadcasting and professional video applications. Known for its high-performance capabilities and seamless integration into existing systems, the ENV-VST-C stands as a reliable choice for content creators, broadcasters, and businesses alike.

One of the main features of the AMX ENV-VST-C is its ability to support a wide range of video formats and resolutions. The device is capable of encoding and streaming in 4K, Full HD, and SD resolutions, ensuring that users can produce high-quality content regardless of their specific requirements. This versatility makes it suitable for various applications, including live event streaming, corporate communications, and even online educational platforms.

The ENV-VST-C utilizes state-of-the-art encoding technologies, such as H.264 and H.265, providing users with high-quality video while optimizing bandwidth usage. H.265, in particular, allows for significantly smaller file sizes compared to H.264, all without sacrificing video quality. This efficiency is crucial for users looking to reduce costs associated with bandwidth and storage, especially in environments where video distribution is critical.

Another key characteristic of this encoder is its user-friendly interface. The AMX ENV-VST-C features an intuitive control panel and web interface that allows users to configure settings, monitor performance, and manage live streams effortlessly. This ease of use is essential for operators who may not have in-depth technical knowledge but need to manage complex streaming tasks efficiently.

In addition, the AMX ENV-VST-C supports multiple streaming protocols, including RTMP, RTSP, and MPEG-TS. This capability enables seamless integration with various content delivery networks (CDNs) and ensures that users can reach their audience effectively across different platforms.

Moreover, the device is designed with reliability in mind. It offers features such as redundant power supplies and advanced cooling systems, which help maintain optimal performance even in demanding environments. This reliability is crucial for live streaming applications, where any downtime can result in significant loss of engagement and revenue.

In conclusion, the AMX ENV-VST-C stands out with its robust feature set, cutting-edge technologies, and user-centric design. Whether you are in broadcasting, corporate communication, or education, this encoder provides the performance and flexibility needed to deliver exceptional video content. With its commitment to quality and efficiency, the AMX ENV-VST-C is a valuable asset for anyone looking to enhance their video production capabilities.
Top Page Image Contents