AMX ENV-VST-C manual Establishing Away Mode Settings, Away Mode Screen Options

Page 32

Setup and Configuration

Away Mode Screen

The Away Mode screen (FIG. 28) enables you to set heating, cooling, humidify, and dehumidify setpoints that remain unchanged until a specific date and time. You can use the navigation buttons to move through the highlighted options. The Mode/Select button selects the highlighted item. You can then use the navigation buttons to change the setting of the highlighted option.

FIG. 28 Away Mode screen

Pressing Mode/Select again highlights the next available option. The following table lists the options on the Away Mode screen:

Away Mode Screen Options

Away Mode

The Hold temperature overrides the heating and cooling settings. If you select Disabled, the thermostat

 

uses the heating and cooling settings you establish on the Hold Mode screen.

 

 

Return Date

The thermostat uses the settings until the date you indicate here.

 

 

Return Time

The thermostat uses the settings until the time you indicate here on the date you indicate in Return Date.

 

 

Cooling Temp

Establishes the level of desired coolness for the HVAC system.

 

 

Heating Temp

Establishes the level of desired heat for the HVAC system.

 

 

Humidify

Establishes the level of humidity. This option does not appear if you have the Humidification System

 

option turned off in the Advanced Setup options.

 

See the Advanced Setup Screen section on page 39 for more information.

 

 

Dehumidify

Establishes the level of de-humidity. This option does not appear if you have the Dehumidification

 

System option turned off in the Advanced Setup options.

 

See the Advanced Setup Screen section on page 39 for more information.

 

 

Exit

Exit the Away Mode screen and return to the Main screen.

 

 

Establishing Away Mode Settings

Away Mode settings enable you to create heating, cooling, humidify, and dehumidify setpoints that remain unchanged until a specific date and time. When the time limit expires, the thermostat uses the previous program or hold mode settings you set. Perform the following steps to create away mode settings:

1.From the Main screen, press Mode/Select to access the Thermostat Mode screen (FIG. 25).

2.Use the navigation buttons to select Away, and press Mode/Select. The Away Mode screen appears (FIG. 28).

3.Press Mode/Select to enable your Away Mode settings. Enabling the Away Mode settings automatically selects the Return Date option.

4.Press Mode/Select to change the return date. The month, day, and year each change individually, so use the navigation buttons to change the month. Press Mode/Select again to select the day, and use the navigation button to change it. Repeat the process one more time to change the year.

5.Press Mode/Select to change the return time. The hour, minute, and clock period each change individually, so use the navigation buttons to change the hour. Press Mode/Select again to select the minute, and use the navigation button to change it. Repeat the process one more time to change the clock period.

26

ENV-VST-C - Operation / Reference Guide

Image 32
Contents ENV-VST-C AMX Limited Warranty and Disclaimer Table of Contents Advanced Thermostat Operations Programming AxLink Channels AxLink Levels Weather Duet Module System Components ViewStat Color Thermostat SpecificationsOverview ENV-VST-TSO Outdoor Temperature Sensor Specifications Communication and HvacDisconnecting Power to All Hvac Equipment Remote Temperature SensorsSelecting the Thermostat Location Stand-Alone Thermostat Mounting CriteriaMounting the Base to a Wall Wiring the ThermostatRemoving the Faceplate from the Base Communication and Equipment Terminal Wiring Definitions Wiring TerminalsCommunication and Equipment Terminal Wiring Definitions Wiring for AxLink Preparing Captive WiresWiring Guidelines Wiring Diagrams Single Stage Furnace and Single Stage A/CDual Stage Furnace and Dual Stage A/C wiring Dual Stage Furnace and Dual Stage A/CRoof Top Unit with Dual Stage Heat and Dual Stage Cool Boiler and A/C with Separate Transformers wiring Boiler and A/C with Separate TransformersSingle Stage Heat Pump wiring Single Stage Heat PumpTwo Stage Heat Pump wiring Two Stage Heat PumpInstallation and Wiring Installing a Remote Sensor Installing the Outdoor Temperature SensorInstalling the Indoor Flush Mount Sensor Indoor Flush Mount Temperature Sensor SpecificationsSensor wire connected to cable Front Panel Components Navigating the ViewStat Color Communicating ThermostatChanging the Heating and Cooling Setpoints Main Screen Status IconsChanging Hold Mode Changing the Heating/Cooling ModeHold Mode Options To ProgramChanging the Fan Mode Heating/Cooling Mode OptionsTurning Off the Hvac System Stops blinkingFan Mode Options Help ScreenFan Auto Or coolingCurrent Weather Screen Day Forecast ScreenExit Returns to the Main screen Thermostat Mode ScreenThermostat Mode Screen Options Program Screen Options Establishing Daytime/Nighttime Temperature SettingsProgram Screen Copying Programmed Settings Copy To screenAway Mode Screen Options Away Mode ScreenEstablishing Away Mode Settings Settings Screen Options Settings ScreenChanging the Fan Settings Changing the Filter Settings Security Code Screen Accessing Advanced Setup OptionsChanging User Preferences Entering the Security Code Change Security Code ScreenChanging the Security Code User Preferences Screen User Preferences Screen OptionsChanging the Temperature Scale Changing the Date and Time FormatChanging the Backlight Settings Disabling the Filter Change ReminderDisabling the Screen Saver Disabling the Weather Alert IconDisabling the Forecast Screens Button Lockout Screen Button Lockout Screen OptionsLocking the Temperature Settings Locking the ButtonsLocking the Fan Settings Locking the Mode SettingsAdvanced Setup Screen Advanced Setup Screen OptionsWhen Diagnostic Mode is active Changing the Type of Hvac SystemChanging the Type of Fossil Fuel Activating the External SensorActivating the On-board Humidity Sensor Setting the Date and Time on the ThermostatActivating the Internal On-board Sensor Turning on Diagnostic Mode Advanced Setup screen 2Turning on Comfort Recovery Turning on the Humidification and Dehumidification SystemsAxLink Communications Screen AxLink Communications screenSwitching AxLink Devices Thermostat Setup Screen Options Thermostat SetupThermostat Setup Screen Setting First and Second Stage Differentials Setting the Deadband Temperature DifferenceSetting the Temperature Offset Setting the Balance Point for a Heat Pump SystemThermostat Setup screen 2 SENDCOMMANDs SENDCOMMANDsColor ViewStat Thermostat Commands Day Forecast CommandsDay Forecast Commands Weather Condition KeywordsAxLink Commands AxLink CommandsTemperature scale Displays the current forecastDew Point 55F To Off, the response reports OFFSendcommand ’LK MR1 TR3’ Sets the mode to Program Sets the current barometric pressure Request the thermostat’s serial numberMaster requesting the thermostat’s serial number Thermostat returns the serial numberAxLink Channels AxLink Channels219 Hvac State EmergencyHeat 224 2nd stage heat relay Provides feedback from relay W2 246AxLink Levels AxLink LevelsWeather Duet Module Weather Setup Pages InConcert windowChanging the Date and Time Weather MainChanging the Humidity Settings Changing the Humidity ModeChanging the Heat and Cool Settings Humidity menuChanging the Hvac Mode Hvac Mode menuChanging the Hold Mode Entering Location by Zip CodeChanging Temperature Units Entering Location by Station IDChanging Wind Speed Units Changing Pressure UnitsDay Forecast screen Programming ENV-VST-C Operation / Reference Guide Increase Your Revenue through education + knowledge
Related manuals
Manual 2 pages 4.04 Kb

ENV-VST-C specifications

The AMX ENV-VST-C is an advanced video streaming and encoding solution designed to meet the needs of modern broadcasting and professional video applications. Known for its high-performance capabilities and seamless integration into existing systems, the ENV-VST-C stands as a reliable choice for content creators, broadcasters, and businesses alike.

One of the main features of the AMX ENV-VST-C is its ability to support a wide range of video formats and resolutions. The device is capable of encoding and streaming in 4K, Full HD, and SD resolutions, ensuring that users can produce high-quality content regardless of their specific requirements. This versatility makes it suitable for various applications, including live event streaming, corporate communications, and even online educational platforms.

The ENV-VST-C utilizes state-of-the-art encoding technologies, such as H.264 and H.265, providing users with high-quality video while optimizing bandwidth usage. H.265, in particular, allows for significantly smaller file sizes compared to H.264, all without sacrificing video quality. This efficiency is crucial for users looking to reduce costs associated with bandwidth and storage, especially in environments where video distribution is critical.

Another key characteristic of this encoder is its user-friendly interface. The AMX ENV-VST-C features an intuitive control panel and web interface that allows users to configure settings, monitor performance, and manage live streams effortlessly. This ease of use is essential for operators who may not have in-depth technical knowledge but need to manage complex streaming tasks efficiently.

In addition, the AMX ENV-VST-C supports multiple streaming protocols, including RTMP, RTSP, and MPEG-TS. This capability enables seamless integration with various content delivery networks (CDNs) and ensures that users can reach their audience effectively across different platforms.

Moreover, the device is designed with reliability in mind. It offers features such as redundant power supplies and advanced cooling systems, which help maintain optimal performance even in demanding environments. This reliability is crucial for live streaming applications, where any downtime can result in significant loss of engagement and revenue.

In conclusion, the AMX ENV-VST-C stands out with its robust feature set, cutting-edge technologies, and user-centric design. Whether you are in broadcasting, corporate communication, or education, this encoder provides the performance and flexibility needed to deliver exceptional video content. With its commitment to quality and efficiency, the AMX ENV-VST-C is a valuable asset for anyone looking to enhance their video production capabilities.