Gianni Industries AD-425S instruction manual Installation Steps Out-swing door Right-Hand Open

Installation Steps Out-swing door( Right-Hand Open )

Step	Figures	Explanation
		Place the AD-425S template to the right position on
Step 1.		the door header. See the figure presented for an
		out-swing door (Right-Hand Open), more details
		shown in Figure 17.

Step 2. Mark for pilot holes. (Use the center pointer)

Step 3. Mark six pilot holes, one cable hole and center line.

Step 4. Drill a pilot hole.

Step 5.	Drill six Ø 9.5mm pilot holes and one Ø 18mm cable
	hole.

Step 6. Tap and insert a Blind Nut.

Copyright All Rights Reserved.
P-MU-AD425S Ver. A Publish:2008.07.11	Page: 12/ 20